What Is 2D Technical Drawing Board?
2D Technical Drawing Board is a free online tool by TechnSols that turns your browser into a CAD style drawing sheet. You draw lines, circles, arcs, and rectangles on a 640 by 400 millimetre canvas, snap every point to a 10 millimetre grid, read the measurement of each shape as you draw it, and export the finished drawing as an SVG file and a DXF file. It answers a simple problem: you need a clean technical drawing with real measurements, but you do not want to install heavy CAD software or pay for a licence to make one small plan.
A quick sketch on paper cannot give you exact lengths, and a general drawing app cannot give you a DXF file that a workshop or a CAD program can open. This board keeps both jobs together. The grid and snap put every point on a real millimetre value, the labels show each shape measurement, and the export writes the drawing as SVG and DXF. If you already have an SVG drawing that needs a CAD copy, the SVG To DXF tool converts that file instead.
Everything runs in your browser, and no file is uploaded anywhere. The demo drawing loads with one click, so you can see a rectangle, a circle, and a line with their measurements before you draw anything of your own. Your drawing stays on your own computer from the first line to the final export.
How To Use 2D Technical Drawing Board?
Using 2D Technical Drawing Board takes a few minutes, with no software to install and no account to make. Pick a tool, drag on the canvas, read the measurement, and export the drawing when it looks right. A grid sheet helps you plan the layout first, and the Blueprint Grid tool draws one you can print.
Step 1: Load The Demo Drawing Or Draw Your First Shape
Press Load Demo Drawing to see the built in example at once: a rectangle 120 by 80 millimetres at 60, 60, a circle with a diameter of 50 millimetres at 300, 150, and a line 240 millimetres long from 60, 300 to 300, 300. To draw your own shape instead, pick Line, Circle, Arc, or Rectangle above the canvas, then press and drag on the canvas. A line needs two different points, a circle needs a centre and a drag to set the radius, an arc needs a centre and a drag to set the radius, and a rectangle needs two opposite corners.
Step 2: Check The Snap And The Measurements
Snap to grid is on by default, and it rounds every point you place to the nearest 10 millimetres, so a wall that should be 120 millimetres long lands exactly on 120. Turn snap off for freehand points. Every shape shows its measurement on the canvas, and the dimensions list under the canvas repeats each one in order, so you can check a length without measuring pixels by eye. If a point lands in the wrong place, press Undo to remove the last shape and draw it again. For a finer planning grid, the Dot Grid tool draws a dot grid you can print and sketch on first.
Step 3: Export The Drawing As SVG And DXF
Press Export SVG And DXF when the drawing is ready. The tool writes two files: an SVG with every shape and its label, and a DXF with LINE, CIRCLE, and ARC entities that CAD software can read. Each result row has its own Download button, and Download all files saves both at once. The export button hides after a successful export and comes back as soon as you draw, undo, clear, or change a setting, so a new change always gets a fresh export.
The whole job is three steps, and you can draw, undo, and export again as often as needed.
Why Draw On A 2D Technical Drawing Board?
A technical drawing is a promise about size. A line meant to be 120 millimetres long must be 120 millimetres long in the file, because someone else will cut, print, or build from it. A board that snaps to a grid and labels every measurement keeps that promise visible while you work.
Exact Sizes Beat Rough Sketches
A rough sketch shows the idea, but it cannot show whether a part fits. When every point snaps to 10 millimetres and every shape carries its measurement, the drawing itself proves the sizes. A workshop can read the numbers straight from the file, and you can check a measurement before you send it, not after a part comes back wrong. For a drawing that needs a true isometric view, the Isometric Grid tool draws the grid for that view.
One Drawing Serves Two Audiences
The same drawing often has two readers: a person who wants to see it on a web page, and a CAD program that wants to open it as geometry. SVG serves the first reader, because browsers and vector editors open it directly, and DXF serves the second, because it is the common exchange format for CAD.
No Install Means No Delay
Full CAD software takes time to install, learn, and licence, which makes no sense for a single bracket, a room plan, or a label outline. A board that opens in the browser, loads a demo in one click, and exports in seconds fits the small job. The drawing never leaves your computer, so there is no upload wait and no account step between the idea and the file.
What Can You Do With 2D Technical Drawing Board?
2D Technical Drawing Board fits any job where a flat drawing with real measurements is the answer. These are the jobs it handles best, from a first bracket to a room plan.
Draw A Room Plan With Real Walls
A room plan needs walls at true lengths, or the furniture will not fit when it arrives. Draw each wall as a line with snap on, read the length on the canvas, and check the dimensions list when the plan is done. A rectangle makes the room outline in one drag, and a circle marks a round table or a column. When a wall meets a curve, the Bezier Curve tool helps you study the curve before you draw it.
Sketch A Bracket Or A Part Outline
A small part for a workshop needs an outline with a hole and a size. Draw the outline as a rectangle, add a circle for the bolt hole, and read the diameter from the label. The DXF export carries the same geometry into CAD software, where the workshop can open it, check the hole size, and cut the part.
Make A Label Or A Sign Outline
A label, a badge, or a simple sign starts as a rectangle with a circle or an arc inside it. Draw the outer shape, add the inner shapes, and export the SVG for a vector editor or a laser cutter workflow. When the drawing needs a closer look at its coordinates, the SVG Geometry tool reports every element position.
Flat shapes with real sizes become drawings you can send.
Quality And Settings
Five settings shape the drawing, and each one is simple to set.
- Drawing tools: line, circle, arc, and rectangle, picked above the canvas.
- Sheet: 640 by 400 millimetres, with 1 canvas pixel equal to 1 millimetre.
- Grid: 20 millimetre lines across the whole sheet, always visible.
- Snap to grid: on by default, rounds every point to the nearest 10 millimetres.
- Outputs: one SVG file and one DXF file, each with its own Download button.
The 640 by 400 sheet keeps the drawing readable on screen while holding a useful size. When a drawing must fit a printed page at a chosen scale, the Map Scale tool works out the scale for you.
How 2D Technical Drawing Board Builds Your Files
The board stores every shape you draw as numbers: a line holds two points, a circle holds a centre and a radius, an arc holds a centre, a radius, and a start direction, and a rectangle holds two opposite corners. The SVG export writes each shape as its matching element, with a text label beside it, and the DXF export writes the same shapes as entities: a line becomes a LINE entity, a circle becomes a CIRCLE entity, an arc becomes an ARC entity with start and end angles, and a rectangle becomes four LINE entities that close the shape. DXF coordinates match the canvas millimetre values exactly, so a line from 60, 300 to 300, 300 in the demo appears at the same numbers in the DXF file. A technical drawing is a drawing made to scale with exact measurements, as the Technical Drawing guide explains.
Two honest limits are worth knowing. First, an arc is always a half circle: you set the centre and the radius by dragging, and the arc runs for 180 degrees from the drag direction, so a quarter arc or a custom sweep is not possible here. Second, the sheet is fixed at 640 by 400 millimetres, so a drawing larger than that must be split into parts or drawn at a smaller scale. When a size must be checked at print size, the Print Size tool converts pixels and DPI to a physical size.
Privacy
Everything you draw stays in your browser. 2D Technical Drawing Board runs on your own computer, and nothing you draw is uploaded to a server, stored, or shared with anyone. The tool draws the shapes and writes the SVG and DXF files locally, and that is all it does.
No account is needed, so no name, email, or history is tied to what you do. Closing the tab ends the session and clears the drawing from memory. Your plans stay yours.
Tips
A few habits make 2D Technical Drawing Board work smoother.
- Load the demo first, so you know what a finished drawing looks like.
- Keep snap on for walls and parts, and turn it off only for freehand points.
- Draw the biggest shapes first, then add the small details inside them.
- Check the dimensions list before you export, not after you send the file.
- Undo one shape at a time instead of clearing the whole sheet for a small fix.
When every shape shows the size you expect and the dimensions list matches your plan, the drawing is ready to export. If the exported SVG needs its viewBox checked first, the SVG ViewBox tool works it out for you.
More Tools For The Same Job
These tools handle the same kinds of jobs: drawings, grids, scales, and vector files.
- SVG To DXF Converter: turns an SVG drawing into a DXF file for CAD software.
- Blueprint Grid Generator: draws a blueprint style grid for planning a drawing.
- Isometric Grid Generator: draws an isometric grid for a three dimensional view.
- Dot Grid Generator: draws a dot grid for sketching a layout by hand first.
- Map Scale Calculator: works out the scale between a map distance and a real distance.
- DPI And Print Size Calculator: converts pixels and DPI into a physical print size.
- Bezier Curve Visualizer: draws and edits Bezier curves with their control points.
- SVG Geometry Inspector: reports the coordinates and bounding box of SVG elements.
- SVG ViewBox Calculator: works out the correct viewBox for pasted SVG content.
- SVG Editor And Previewer: edits SVG code by hand and shows the result at once.
FAQ
Common questions about the drawing board and its exports, answered plainly.
Is 2D Technical Drawing Board By TechnSols Free?
Yes, 2D Technical Drawing Board by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can draw and export as many drawings as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Shapes Can I Draw On The Board?
You can draw lines, circles, arcs, and rectangles on a 640 by 400 millimetre sheet. A line needs two points, a circle needs a centre and a radius, an arc is a half circle from a centre and a radius, and a rectangle needs two opposite corners. Every shape shows its measurement on the canvas as you draw it.
What Does The DXF Export Contain?
The DXF export is a minimal valid DXF text file written by the tool itself, with LINE, CIRCLE, and ARC entities for your shapes. A rectangle becomes four LINE entities that close the shape. DXF coordinates match the canvas millimetre values exactly, as the DXF Format guide explains for the format.
How Does Snap To Grid Work?
Snap to grid is on by default and rounds every point you place to the nearest 10 millimetres, so a wall lands on an exact value instead of a near value. Turn it off when you need a freehand point, and turn it back on when you need exact values again. The grid lines are spaced 20 millimetres apart.
Can I Edit A Shape After I Draw It?
You cannot drag a finished shape to a new place, but you can press Undo to remove the last shape and draw it again in the right place. Clear Drawing removes every shape at once and starts a fresh sheet. Draw the biggest shapes first, so a small fix costs one undo instead of many.
Load the demo, draw your shapes, and export both files. A drawing with real measurements and a DXF copy is ready to send to a workshop or open in CAD software, and that is the whole point of the board.