TechnSols
Advertisement

Audio Spectrum Analyzer

See the frequencies in any sound with this free online audio spectrum analyzer. Live FFT bars and peak notes, with no install and no sign-up.

Be the first to rate this tool

Choose a source and press Start Analyser.

Peak: -- Hz.

What Is Audio Spectrum Analyzer?

Audio Spectrum Analyzer is a free online tool by TechnSols that shows which frequencies are inside any sound, live. Play a test tone or switch on your microphone, and watch the spectrum bars move as the sound changes.

Advertisement

Every sound is a mix of pure tones, and a spectrum analyzer splits the mix apart so you can see it. A voice shows energy in the low hundreds of hertz, a whistle shows one tall spike, and mains hum shows a spike at 50 or 60 Hz with its harmonics above it. Seeing the sound tells you what hearing alone cannot: exactly which frequency is loudest, and how loud the rest are. The AnalyserNode Guide page from MDN explains the analyser node behind this tool: it runs a fast Fourier transform on the sound and hands the page the energy in each frequency band.

Engineers find the hum in a recording, teachers show a class what a vowel looks like, and musicians check which note is really sounding in a chord. When the microphone itself needs checking first, the Microphone Tester tool tests it.

How To Use Audio Spectrum Analyzer?

Here is how to read a spectrum in three quick steps. Using Audio Spectrum Analyzer is simple. There is no software to install and no account to make. Pick a source, press Start, and read the bars. If the sound you want to analyse lives in a file, the Audio To MP3 tool can turn it into an MP3 first.

Step 1: Pick A Source

Choose a test tone at 440 Hz or 1000 Hz, or choose the microphone to analyse live sound. A test tone is the best first step, because it shows one clean spike and proves the analyzer is working before you trust it on real sound.

Step 2: Press Start Analyser

Press Start Analyser and the bars begin to move at once. The tallest bar is the loudest frequency, and the peak readout under the canvas names it in hertz and as a musical note, so 440 Hz reads as A4.

Step 3: Read The Bars And Save The Picture

Low frequencies sit on the left of the canvas and high ones on the right, with the height of each bar showing how much energy sits in that band. Press Download Spectrum PNG to save the picture, or press Stop when you are done.

The whole setup takes seconds, because there is nothing to configure and no file to load. A pure tone shows one spike, a voice shows a broad hump, and silence shows a flat floor. When an analysed sound also needs converting, the Audio To WAV tool changes it afterwards.

Why Audio Spectrum Analyzer?

A waveform shows how loud a sound is over time, but a spectrum shows what the sound is made of, and that is the question that matters when something sounds wrong. If a file also needs converting after the check, the Audio Format tool handles the next step.

Hum And Buzz Have A Frequency

Mains hum sits at 50 or 60 Hz, a fan whines at one fixed frequency, and a transformer buzzes at its harmonics. A spectrum shows each one as a spike you can point at, which is the first step to removing it. Guessing from the sound alone never finds the number.

The Peak Note Names The Sound

The peak readout names the loudest frequency as a musical note, so a plucked string that reads A4 at 440 Hz is in tune, and one that reads 430 Hz is flat. The FFT Guide page explains the fast Fourier transform behind the picture: the maths that breaks any sound into its component frequencies.

Live Bars Beat A Static Picture

A static spectrum of a whole file shows the average, but a live analyzer shows the sound as it happens. You can watch a note fade, see a chord change, and catch a click the moment it happens, which a single frozen picture would hide. A file whose sample rate hides detail can be changed with the Sample Rate tool first.

What Can You Do With Audio Spectrum Analyzer?

A spectrum analyzer fits any job where you need to see inside a sound. These are the jobs this tool handles best.

Find The Hum In A Recording

A recording with a low hum is hard to fix until you know the frequency of the hum. The Bit Depth tool turns the checked file into a small MP3, so the fault can be shared with whoever recorded it.

Check An Instrument In Real Time

Play a note and watch its spike appear, with its harmonics stacked above it. A clean note shows a clear spike and tidy harmonics, while a rattling string shows extra energy spread across the spectrum.

Teach What Sound Is Made Of

A classroom can sing one vowel, then another, and watch the spectrum change shape. The picture makes the idea of frequency real in a way that a graph on a whiteboard never does.

Quality And Settings

The analyzer offers test tones at 440 Hz and 1000 Hz, or live microphone input, with FFT sizes of 2048 or 4096 bins and a smoothing control built into the analyser. The peak readout names the loudest frequency in hertz and as a note. If you also need the analysed sound in another format, the Video To MP3 tool converts it without another upload.

Advertisement
  • Live spectrum bars from a test tone or the microphone.
  • Peak frequency named in hertz and as a musical note.
  • FFT size of 2048 or 4096 bins.
  • Spectrum saved as a PNG image with one click.
  • Frequency runs left to right from low to high.

There is one honest limit to know. The readings are in dBFS, relative to full scale, not calibrated sound pressure levels, so this tool cannot measure how loud a room really is. It is a viewer, not a measurement instrument, and the Multichannel Audio tool cannot make it one.

How Audio Spectrum Analyzer Works

The tool feeds the chosen source into an analyser node, which runs a fast Fourier transform on short windows of the sound. With an FFT size of 2048, the sound is split into 1024 frequency bands, and with 4096 it is split into 2048 bands. Each band reports its energy as a byte from 0 to 255, and the page draws one bar per band on the canvas, sixty times a second.

The peak is found by scanning the bands for the largest value and turning its band number into a frequency with the sample rate and the FFT size. That frequency is then turned into a note name on the twelve tone equal temperament scale, where A4 is 440 Hz. The bars are drawn in green on a dark canvas, with low frequencies on the left and high frequencies on the right.

Two limits are worth knowing. First, a bigger FFT size gives finer frequency detail but slower time detail, so 4096 bins see close notes apart better, while 2048 bins follow fast changes better. Second, the microphone path needs permission, and the browser may apply noise suppression that changes the spectrum, so a test tone is always the cleaner first check. The smoothing constant of 0.5 blends each new frame with the one before it, so the bars move smoothly instead of jumping, and the peak readout holds steady enough to read while the sound is still changing. A pure tone from the test source shows one tall bar and a flat floor everywhere else, which is the quickest proof that the analyzer is reading the sound and not the noise in the room.

Privacy

Everything you analyse stays in your browser. The Audio Spectrum Analyzer analyses sound in the tab and throws it away, and nothing you do is uploaded to a server, recorded, stored, or shared with anyone. The tool does its job and shows the answer, and that is all it does.

Because no account is needed, there is no name, email, or history tied to what you do. The microphone switches off when you press Stop, and closing the tab ends the session. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.

Tips

A few habits make Audio Spectrum Analyzer work smoother, whether this is your first spectrum or your five hundredth.

  • Start with the 440 Hz test tone to prove the analyzer works.
  • Use FFT 4096 when two close notes need telling apart.
  • Turn off system noise suppression for the truest picture.
  • Download the PNG before you press Stop.
  • Compare a quiet room with the sound on to find the hum.

When the picture is saved, the check is done and nothing was recorded. If the sound you analysed also needs a format change, the MP3 To OGG tool converts it afterwards.

More Tools For The Same Job

These tools handle the same kinds of jobs: audio, sound, and music.

FAQ

Common questions about Audio Spectrum Analyzer, answered plainly.

Is Audio Spectrum Analyzer by TechnSols Free?

Yes, Audio Spectrum Analyzer by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can use it as often as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

What Is An FFT?

FFT stands for fast Fourier transform, the maths that breaks a sound into its component frequencies. Any sound, however complex, is a mix of pure tones, and the FFT works out how much energy sits at each frequency. The analyzer draws those energies as bars, one per frequency band.

Why Does My Voice Show A Broad Hump?

A voice is not one pure tone, it is a fundamental frequency plus many harmonics, spread across hundreds of hertz. The spectrum shows that spread as a broad hump with peaks at the harmonics. A whistle, by contrast, is nearly one pure tone, so it shows one tall spike.

Can I Measure How Loud A Room Is?

No, not with this tool. The readings are in dBFS, relative to full scale in the browser, not calibrated sound pressure levels. A real room measurement needs a calibrated microphone and a sound level meter. This tool shows which frequencies are present, not how loud they are in the room.

Does The Analyzer Record My Microphone?

No, it never records anything. The microphone stream is analysed live in your browser and thrown away, frame by frame. No audio is sent to a server, no file is made, and nothing is stored. Press Stop and the browser closes the microphone stream at once.

Pick a source, press Start, and watch the sound turn into a picture. A spectrum that takes a second beats a guess that takes an hour, and nothing you played was ever recorded.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement