TechnSols
Advertisement

Color Blindness Simulator

Simulate color blindness on any image online for free. See protanopia, deuteranopia, and tritanopia fast, with no install and no sign-up.

Be the first to rate this tool

Drop an image here, or

One image file: PNG, JPG, WebP, GIF or BMP. Nothing is uploaded.

Or press Ctrl+V to paste a copied image.

No image selected yet.

What Is Color Blindness Simulator?

Color Blindness Simulator is a free online tool by TechnSols that shows how an uploaded image looks to a person with colour blindness. You upload a picture, pick protanopia, deuteranopia, or tritanopia, and the tool redraws the image on a canvas with the published Machado simulation matrices, then lets you download the simulated image as a PNG. It is the fastest way to check whether a design still works when colour is not the only signal.

Advertisement

Colour blindness affects a large share of people, most often men, and most often in the red-green range. The Colour Blind Awareness site explains that about 1 in 12 men and 1 in 200 women have some form of colour vision deficiency, which means a design that relies on red versus green alone will fail for a real part of every audience. A simulator shows that failure before the design ships.

The simulation covers the three main types: protanopia, where red light is not seen, deuteranopia, where green light is not seen, and tritanopia, where blue light is not seen. If a colour pair collapses into one under simulation, the Colour Contrast Checker tool measures the contrast between the two colours so you can pick a pair that stays apart.

People use it to check charts, maps, product photos, and interface screenshots before they publish. It works on the image you upload, in your browser, and the simulated image can be downloaded for a report or a ticket. A simulation is a model of an average observer, not a picture of any one person’s vision, and it cannot diagnose colour blindness.

How To Use Color Blindness Simulator?

Here is how to simulate colour blindness online in three quick steps. Using Color Blindness Simulator is simple. There is no software to install and no account to make. Upload an image, pick a vision type, and press Simulate. If a colour pair fails, the Colour Palette Generator tool builds a palette that stays distinct.

Step 1: Upload Your Image

Drop an image onto the tool, choose it from your device, or paste a copied image with Ctrl+V. One image at a time, in PNG, JPG, WebP, GIF, or BMP format, up to 100 MB. The image is read on your device, so it never leaves your browser, and the tool checks that it really is an image before it starts.

Step 2: Pick A Vision Type

Choose protanopia for no red vision, deuteranopia for no green vision, or tritanopia for no blue vision. Protanopia and deuteranopia are the common red-green types, and they are the ones most designs fail for. Tritanopia is rarer, but it matters for designs that lean on blue and yellow.

Step 3: Simulate And Download

Press Simulate and the tool redraws the image with the Machado matrices for the type you picked. Compare the result with the original and look for colours that collapse into one another. Press Download to save the simulated image as a PNG. When a pair fails, the Complementary Colour Generator tool finds a complementary colour that still works.

The whole job takes less than a minute for most images. Simulate all three types, because a design that survives one type can still fail another.

Why Color Blindness Simulator?

Colour is the fastest signal on a page, and it is the one most likely to fail silently. A chart that uses red for loss and green for gain, a map that uses red and green regions, or a form that marks errors in red alone all look clear to typical vision and unreadable to a colour blind visitor. This simulator shows the failure before it ships. The Colour Shades Generator tool builds shades of one colour that stay apart under simulation.

The rule behind the check is that colour must never be the only way information is shown. The WCAG colour rule rule requires that colour is not the only visual means of conveying information, so a chart needs labels or patterns as well as colours. This simulator shows you exactly where colour is doing the work alone.

Red And Green Collapse Into One

Under protanopia and deuteranopia, reds and greens shift toward the same brown and olive tones, so a red versus green pair that looks obvious to typical vision becomes two nearly identical shades. The simulator shows that collapse directly, so you can add labels, shapes, or patterns that carry the meaning instead.

Charts And Maps Fail First

Charts and maps lean on colour more than any other content, and they fail hardest when colour is the only code. A pie chart with red and green slices, or a map with red and green regions, becomes unreadable under simulation. Check every chart and map this way before it reaches readers.

Text Contrast Survives, Meaning Does Not

A simulation rarely breaks text contrast, because contrast is about lightness, not hue. What it breaks is meaning: the difference between two colours that carried two different messages. That is why the simulator matters even when the contrast ratios all pass.

What Can You Do With Color Blindness Simulator?

Colour blindness simulation fits anywhere colour carries meaning. These are the jobs this simulator handles best.

Check A Chart Before Publishing

Upload a screenshot of the chart and simulate all three types. The Image Colour Adjuster tool fixes brightness and contrast on the same image while you check it. A chart whose slices stay distinct under every type is ready to publish, and the simulated image is the proof.

Test A Product Photo Or Interface

Upload a screenshot of the interface or the product photo and look for controls that rely on colour alone: a red error, a green success tick, or a colour-coded status. Add an icon or a word beside the colour, and the interface works for everyone, not just for typical vision.

Build A Colour Blind Safe Palette

Upload a palette as an image and simulate it, then keep only the colours that stay apart. The Image to JPG tool converts the palette image to JPG for sharing with the team. A palette that survives simulation is one you can use across a whole site without worry.

Advertisement

Quality And Settings

The simulation uses the published Machado, Oliveira, and Fernandes (2009) matrices at full severity, applied directly to the image colours. The Image to WebP tool converts images to WebP so the page loads faster once the colours are fixed.

  • Protanopia, deuteranopia, and tritanopia simulation, each at full severity.
  • Machado 2009 matrices, the published model most simulators use.
  • Canvas rendering, so the whole image is simulated pixel by pixel.
  • Simulated image downloadable as a PNG for reports and tickets.
  • Images up to 100 MB, scaled to 1200 pixels on the longest side.

There are no settings to tune, because the matrices are fixed by the published model. Upload the image, pick a type, and simulate. If a colour pair collapses, change the colours or add a second signal, then simulate again.

How Color Blindness Simulator Works

The simulator draws your image onto a canvas, reads every pixel, and multiplies its red, green, and blue values by the 3 by 3 matrix for the vision type you picked, then writes the result back to the canvas. The Image Converter tool changes image formats the same way, entirely in the browser, so nothing you upload ever leaves your device.

Two limits are worth knowing. A simulation is a model of an average observer, so two people with the same diagnosis can see colours differently, and your screen settings change what you see too. The tool also cannot diagnose colour blindness: only a clinician with a proper test can do that. Use it as strong guidance for design, not as a medical result.

Privacy

Your uploaded image never leaves your device. The simulation runs in your browser on a canvas, so the image is read, simulated, and downloaded on your own computer. Nothing is uploaded to a server, nothing is stored, and nothing is shared with anyone.

Because no account is needed, there is no name, email, or history tied to what you check. Closing the tab ends the session, and the browser clears the input from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.

Tips

A few habits make Color Blindness Simulator work smoother, whether you are checking one page or working through a whole site.

  • Simulate all three types: a design can survive one and fail another.
  • Never use colour alone: add a label, an icon, or a pattern beside every colour signal.
  • Check charts first: they lean on colour more than any other content.
  • Test the real image: a screenshot of the live page beats a mockup every time.
  • Keep the simulated PNG: it is the clearest proof in a ticket or a report.

When the colours survive simulation, save the simulated image with the date, so the next design change has a baseline to compare against. If part of the image should not be shown, the Image Blur Tool tool blurs it before you simulate.

More Tools For The Same Job

These tools handle the same kinds of jobs: checking, building, and fixing the colours and images a page is built from.

  • Colour Contrast Checker: checks the contrast between two colours against the WCAG ratios.
  • Colour Palette Generator: builds colour palettes that stay distinct under colour blindness.
  • Complementary Colour Generator: finds a complementary colour that still works for colour blind users.
  • Colour Shades Generator: builds shades of one colour that stay apart under simulation.
  • Image Colour Adjuster: fixes brightness and contrast on images before simulating them.
  • Image to JPG: converts images to JPG for smaller pages once the colours are fixed.
  • Image to WebP: converts images to WebP so the page loads faster.
  • Image Converter: changes an image from one format to another without an upload.
  • Image Blur Tool: blurs parts of an image that should not be shown.

FAQ

Common questions about simulating colour blindness, answered plainly.

Is Color Blindness Simulator by TechnSols Free?

Yes, Color Blindness Simulator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can simulate as many images as you like, and every simulation runs in your browser, so nothing you upload is sent to a server or stored anywhere.

What Is The Difference Between Protanopia And Deuteranopia?

Protanopia means red light is not seen, and deuteranopia means green light is not seen. Both are red-green types, and both make reds and greens collapse toward similar brown and olive tones. Protanopia also darkens reds more, so a red can look almost black, while deuteranopia keeps the brightness closer to normal.

Can This Simulator Diagnose Colour Blindness?

No, this simulator is a design and testing aid, not a medical device. It shows an approximation of how colours may appear to a person with colour vision deficiency, based on a published mathematical model. Only a clinician with an Ishihara plate test or an anomaloscope can diagnose colour blindness.

Why Do My Reds And Greens Look The Same?

Under protanopia and deuteranopia, the red and green signals the eye normally separates are both weak or missing, so the two colours map to nearly the same output. That is why red versus green is the riskiest pair in design, and why labels, shapes, or patterns must carry the meaning as well as the colour.

Does The Simulator Change The Image I Uploaded?

No, the original image is never changed. The simulator draws a new version on a canvas with the simulation matrices applied, and the download saves that simulated copy as a separate PNG file. Your uploaded file stays exactly as it was, and it never leaves your device.

Upload the image, simulate all three types, and fix what collapses. A design that works under simulation works for a real part of every audience, and the check takes less than a minute.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement