What Is DMS To Decimal Degrees Converter?
DMS to Decimal Degrees Converter is a free online tool by TechnSols that turns a coordinate written in degrees, minutes and seconds into a single decimal number, with no install and no sign up. Land records, old maps, survey notes and many GPS units write a place as 31 degrees 31 minutes 13.44 seconds N, 74 degrees 21 minutes 31.32 seconds E, while Google Maps, most websites and nearly every modern app want the same place as 31.5204, 74.3587. The two forms describe the same point on Earth, but you cannot paste one into a box that expects the other. This free online tool does the conversion in your browser. Type the degrees, the minutes and the seconds for the latitude and the longitude, pick N or S and E or W, and the decimal form appears at once, ready to copy.
DMS, short for degrees, minutes and seconds, is the oldest way of writing a coordinate. One degree holds 60 minutes, and one minute holds 60 seconds, so a DMS figure is really three small numbers that add up to one position. Decimal degrees, often shortened to DD, fold those three numbers into one: the minutes are divided by 60 and the seconds by 3,600, and the parts are added to the degrees. The tool does the arithmetic exactly and shows six decimals, which is precise to about 11 centimetres on the ground, more than enough for maps, forms and navigation. You can read more about the decimal form on the Decimal Degrees page, and about how coordinates work in general on the Geographic Coordinate System page.
People search for this tool in many ways: DMS to decimal degrees, DMS to DD, degrees minutes seconds to decimal, convert DMS to decimal degrees, DMS coordinates to decimal, and how to convert DMS to decimal degrees. All of those mean the same job, and this page covers them all. Whether you are reading a property deed, copying a survey marker into a map, logging a field site, or pasting a waypoint into a route planner, the converter gives you the exact decimal coordinate without a calculator or a spreadsheet.
How To Use DMS To Decimal Degrees Converter
Using the tool takes three quick steps. There is nothing to install, no account to make and no file to upload. You type the three parts of each coordinate, pick the hemispheres, and read the answer straight away.
Step 1: Enter Your Latitude In DMS
Type the latitude degrees, minutes and seconds into the three latitude boxes, then pick N for north of the equator or S for south of it. Degrees for latitude run from 0 to 90, minutes from 0 to 59, and seconds from 0 to just under 60. If your source writes the seconds with decimals, type them as they are, because the tool keeps the full precision. A Unit Converter is handy when your source mixes measurement systems, but coordinates themselves always go in as plain numbers.
Step 2: Enter Your Longitude In DMS
Type the longitude degrees, minutes and seconds into the three longitude boxes, then pick E for east of Greenwich or W for west of it. Degrees for longitude run from 0 to 180, with the same 0 to 59 range for minutes and seconds. The result updates live with every keystroke, so as soon as all six boxes hold valid numbers, the decimal coordinate appears below. A Length Converter can help with the distances around your work, while this tool stays focused on the coordinate itself.
Step 3: Copy The Decimal Result
Press Copy result to put the full decimal coordinate on your clipboard, then paste it where you need it: a map search box, a spreadsheet, a form or a message. The copied text holds both the latitude and the longitude, so you paste once and you are done. If your destination wants the two parts separately, the page also lists the latitude and the longitude on their own lines under the main result. A Scientific Calculator sits beside this tool for any extra maths your work needs.
That is the whole job. No sign up, no download, no file leaving your browser.
Why Use DMS To Decimal Degrees Converter?
Modern maps want decimals, but the world still writes coordinates in DMS. This tool closes that gap in seconds, without a formula that can slip by a minute or a second.
Paper Maps And Deeds Speak DMS
Property papers, survey reports, old charts and many printed maps write coordinates in degrees, minutes and seconds. To check one of those points on a modern map, you have to turn it into a decimal first, because a map search box will not understand the DMS form. The converter keeps the maths exact and shows six decimals, so the point you paste is the point on the paper.
GPS Units And Apps Disagree On Format
Handheld GPS units and marine plotters often show DMS, while phone apps and web maps show decimals. Moving a waypoint from the device to the phone means changing the format without changing the place. The converter does that change instantly, and its companion tool turns decimals back into DMS, so the pair covers both directions of the same job.
Manual Conversion Wastes Time And Invites Errors
By hand, converting one coordinate means dividing the minutes by 60, dividing the seconds by 3,600, and adding both to the degrees, twice over for latitude and longitude. The tool does each conversion instantly and identically every time, so a long list takes minutes instead of an hour, and every result follows the same rule.
What Can You Do With DMS To Decimal Degrees Converter?
The converter fits anywhere a DMS coordinate has to become a decimal. These are the jobs it handles most often.
Search A Deed Or Survey Point On A Map
A property deed or a survey report gives you a point in DMS. Type it here, copy the decimal result, and paste it into your map app to see the exact place. The same trick works for a boundary marker, a borehole or a site in a field report. When the trip to that place crosses time zones, a Time Zone converter helps plan the visit, and a Speed Converter helps work out the travel time.
Move Waypoints From A GPS Unit To A Phone
Your handheld GPS shows waypoints in DMS, but your phone map and your route planner want decimals. Convert each waypoint here and paste it into the app. For the size of the ground you are covering, an Area Converter works out the plot or the field from its corners.
Build A Spreadsheet Of Coordinates
Field teams often collect DMS coordinates on paper, then need them in a spreadsheet for mapping or analysis. Typing decimals by hand from DMS notes means converting every row first. This tool converts each row in seconds, and the Copy button keeps the workflow moving from one row to the next without retyping or breaking a formula.
Quality And Settings
The tool has no settings to tune, because a coordinate conversion has one right answer. Quality here means exact maths, clear rounding and honest limits, and this is how the tool delivers them.
- The result shows six decimals, which is precise to about 11 centimetres on the ground.
- Minutes are divided by 60 and seconds by 3,600, with no rounding until the final display, so nothing is lost in the middle.
- Degrees are checked against 0 to 90 for latitude and 0 to 180 for longitude, and minutes and seconds against 0 to 59, with a plain message when a value is out of range.
- The hemisphere pickers, N or S and E or W, decide the sign, so south and west are never lost or flipped.
- Nothing is uploaded or stored. The conversion runs in your browser, so your coordinates stay on your device.
One limit is worth stating plainly. The tool converts the format, not the datum. Coordinates from different map datums can point a few dozen metres apart even when the numbers look the same, and this tool does not shift between datums.
How DMS To Decimal Degrees Converter Works
The conversion is simple arithmetic, done exactly. The tool adds the degrees to the minutes divided by 60 and the seconds divided by 3,600, then applies a minus sign for S or W. Take Lahore as an example. A latitude of 31 degrees 31 minutes 13.44 seconds becomes 31 plus 31 over 60 plus 13.44 over 3,600, which is 31.5204. A longitude of 74 degrees 21 minutes 31.32 seconds becomes 74 plus 21 over 60 plus 31.32 over 3,600, which is 74.3587.
Four decimals place a point to about 11 metres, five to about 1.1 metres, and six to about 11 centimetres.
Privacy
Coordinates can point at a home, a workplace or a private site, so privacy matters here more than in most converters. This tool never uploads your numbers anywhere. The conversion runs entirely in your browser, on your own device, and nothing you type is sent to a server, saved in a file or shared with anyone.
There is no account, no sign up and no history kept on the site. When you close the tab, your coordinates go with it.
Tips
A few habits make coordinate work smoother and keep mistakes out of your results.
- Always check the hemisphere picker before you copy. Picking N instead of S moves a point to the opposite side of the equator.
- Watch for seconds of 60 or more in your source. A sloppy note that writes 61 seconds really means one minute and one second, so fix it before you type it in.
- When a list of points all come from the same source, convert them one at a time and paste each result straight away, so no point is ever copied into the wrong row.
- If a map shows a coordinate with a comma as the decimal mark, change it to a dot before you paste it in, because the tool reads dots.
- For the average of several readings at one site, an Average Calculator smooths the numbers before you convert, and a Percentage Calculator works out the share of a route or an area when a report asks for it, while a Date Difference calculator counts the days between field visits.
One last tip: save the decimal result next to the DMS original in your notes.
More Tools For The Same Job
These tools sit beside the DMS converter and cover the numbers that usually travel with a coordinate.
- Length Converter: turn a distance between two points into kilometres, miles or metres.
- Unit Converter: change any measurement unit in one place when your data mixes systems.
- Area Converter: work out the size of a plot or a field from its boundary points.
- Speed Converter: turn travel speed between kilometres per hour, miles per hour and knots.
- Time Zone Converter: find the local time at a faraway coordinate before you call or travel.
- Date Difference Calculator: count the days between two dates on a survey or a trip plan.
- Average Calculator: average several GPS readings taken at the same site.
- Scientific Calculator: handle the extra maths around coordinates and distances.
- Percentage Calculator: work out what share of a route or an area a part covers.
- Time Duration Calculator: add up the hours spent travelling between survey sites.
FAQ
Common questions about DMS, decimal degrees and this converter.
How Do I Convert DMS To Decimal Degrees?
Type the degrees, minutes and seconds for the latitude and the longitude, pick N or S and E or W, and the tool adds the minutes divided by 60 and the seconds divided by 3,600 to the degrees. The decimal result shows at once, with six decimals, and you can copy it with one press.
What Does DMS Mean In Coordinates?
DMS means degrees, minutes and seconds. It is the oldest way of writing a coordinate, where one degree holds 60 minutes and one minute holds 60 seconds. A place written as 31 degrees 31 minutes 13.44 seconds N is the same place as 31.5204 in decimal degrees, only written in three parts instead of one number.
How Precise Is Six Decimal Places?
Six decimal places place a point to about 11 centimetres on the ground. That is far tighter than the few metres of error a phone GPS gives, so nothing useful is lost. Four decimals give about 11 metres and five give about 1.1 metres, which is why most mapping tools accept four to six decimals.
What Happens If I Type 60 Minutes Or 60 Seconds?
The tool rejects minutes or seconds of 60 or more with a plain message, because 60 minutes is really one degree and 60 seconds is really one minute. Fix the value in your source first, for example by carrying the extra minute into the degrees, and then type the corrected numbers.
Is DMS To Decimal Degrees Converter Free And Online?
Yes. The converter is free, runs online in your browser, and needs no install, no account and no sign up. Your coordinates are converted on your own device and never uploaded anywhere.
Is DMS to Decimal Degrees Converter by TechnSols Free?
Yes, DMS to Decimal Degrees Converter by TechnSols is completely free to use. You can turn a coordinate written in degrees as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
DMS and decimal degrees are two ways of writing the same place, and switching between them should take seconds, not a calculator. This tool keeps the conversion exact, the decimals precise and your coordinates private, so you can move a point from a paper record into any map or app that asks for it.