TechnSols
Advertisement

Find and Replace Text

Find and Replace Text free online. Find words in any text and replace them all at once in your browser, with no install.

Be the first to rate this tool

Enter or paste text to change.

What Is A Find And Replace Text Tool?

Find and Replace Text is a free online tool by TechnSols that finds and replaces words in any text. A name changed in a document, a word is spelled wrong in twenty places, and a brand name needs updating everywhere. Fixing each one by hand means reading the whole text and changing every match, and one slip leaves an old word behind. Find and Replace Text is a free online tool from TechnSols that finds words in any text and replaces them all at once in seconds. You paste the text, type the word to find and the word to put in its place, the changed text appears at once, and the whole job happens in your browser.

Advertisement

Find and replace is a feature in almost every editor, and this tool brings it to the browser. The text “The cat sat on the cat mat” with “cat” replaced by “dog” becomes “The dog sat on the dog mat”, with 2 matches replaced. Finding “CAT” with match case off replaces the same 2 matches, and with match case on it replaces 0, because the capital letters do not match. The tool replaces live as you type, so the result is ready to copy straight away. It is the simplest way to replace text online without installing anything.

Knowing how to find and replace matters in far more places than fixing names. It decides whether a document is consistent, whether a mistake is truly gone, and whether a rebrand is complete, and every one of those needs every match changed. Replacing by hand is slow and easy to get wrong, and string searching has rules that are easy to forget, like whole words and case. This tool applies the options you pick, so you can see the changed text at once.

How To Use The Find And Replace Text Tool

Using Find and Replace Text takes three simple steps, and it is the fastest way to find replace words across a whole document. You do not need any skill beyond pasting text and typing two words, and the whole job usually takes less than a minute. If you need to turn the changed text into a file after this, the Text to PDF tool turns any text into a PDF for you.

Step 1: Enter Your Values

Type or paste your text into the box. The box takes any length of text, from one sentence to a whole document, and the changed text appears the moment the text is in the box. Paste from a document, a web page or an email, and the tool reads it as plain text.

Step 2: Pick Your Inputs

Type the word to find and the word to replace it with, then pick the options. Tick “Match case” if capital letters must match, and tick “Whole words only” if the match must not touch a letter or digit on either side. If the text comes from a PDF, the PDF to Text tool can pull the words out of the PDF first, so the text you paste matches the job.

Step 3: Read And Copy The Result

Read the changed text in the result box and copy it with the Copy button. The result shows the full changed text, with the number of matches replaced beside it. If you change the text or the find word, the result updates at once, so you can try several replacements quickly. If the text comes from a Word file, the Word to PDF tool turns a Word document into a PDF for you.

That is all there is to it. When a word needs changing everywhere, the tool gives you the changed text in seconds, with the match count beside it for checking.

Why Use The Find And Replace Text Tool?

Replacing a word by hand looks easy until the text gets long. A document has the same word in twenty places, and finding each one takes ages. Here is why so many people replace first and send second. A full replacement stops a small missed word from hiding in the text.

Get An Exact Replacement In Seconds

A changed text with every match replaced is what documents, rebrands and fixes need, and this tool gives you that result at once. Pasting text and typing two words is faster than hunting for matches and far more reliable. The match count beside the answer gives you a figure to check against.

Fix A Mistake Everywhere With Confidence

A misspelled word appears in many places, and fixing only some of them leaves the mistake alive. Replacing it here changes every match at once, so the mistake is truly gone.

Rebrand A Document Properly

A brand name that changed, and a term that must be updated everywhere, both need every match replaced to be consistent. Knowing the match count tells you the rebrand is complete and nothing old is left. That one change lets you update documents, posts and files with confidence, instead of guessing whether a match was missed.

What Can You Do With The Find And Replace Text Tool?

Find and Replace Text is useful whenever a word or phrase needs changing in many places. Here are some of the most common ways people use it.

Fix A Misspelled Word Everywhere

A word is spelled wrong in ten places, and fixing each one by hand takes too long. Type the wrong spelling and the right one, and every match changes at once. If the word also needs to become a code, the Text to ASCII tool turns readable text into character codes for you.

Update A Name In A Document

A person changed their name, and the old name appears all through a document. Replacing the old name with the new one changes every match, so the document is consistent. If the name came from a set of codes, the ASCII to Text tool turns character codes into readable text for you.

Change A Term Across A File

A term must change across a whole file, like a product name or a place name. The tool replaces every match, and the count tells you how many changed. That check helps you prove the change is complete instead of guessing. If the file also needs to become a document, the PDF to Word tool turns a PDF into an editable document for you.

Find And Replace Text Quality And Settings

Find and Replace Text gives you one clear job, a checked result, and simple settings you can understand at a glance. The assumptions behind the tool are stated here so you can trust the change you see. Here is what the tool does.

Advertisement
  • One text box: paste or type any text, from one sentence to a whole document.
  • Find and Replace boxes: type the word to find and the word to put in its place.
  • Match case: tick the box and capital letters must match exactly, so “CAT” does not match “cat”.
  • Whole words only: tick the box and the match must not touch a letter or digit on either side.
  • Clear results: the changed text shows in the result box, with the number of matches replaced beside it, so you can verify it before you copy it, and Copy takes the full text for pasting anywhere.

Paste the text, type the find and replace words, and check the changed text against the match count shown beside it. The same setting works for every text, so there is nothing new to learn when you switch from a name to a term. Keep the match count beside the answer when you record it, so you can prove the working later.

How The Find And Replace Text Tool Works

When you paste text and type the find and replace words, the tool scans the text from start to end and swaps every match. For the text “The cat sat on the cat mat”, finding “cat” and replacing it with “dog” gives “The dog sat on the dog mat”, with 2 matches replaced. Finding “CAT” with match case off gives the same 2 matches, because the case is ignored, and with match case on it gives 0, because the capitals do not match. With whole words only on, finding “cat” in “concatenate the cat” gives “concatenate the dog”, with 1 match replaced, because “cat” inside “concatenate” is not a whole word. The replacement runs in your browser, so the answer appears at once and updates the moment you change the text or the words.

Two honest limits apply here. First, matching is plain text only, with no regular expressions, so a pattern like “any digit” cannot be found, and that is stated here so you can allow for it. Second, with match case off, “Cat”, “CAT” and “cat” all match, and the replacement uses the case you typed, so the changed text may mix cases, and that is stated here so you can allow for it when the result needs one case.

Find And Replace Text Privacy And Safety

Your text never leaves your device. Find and Replace Text runs completely in your browser, so no text is uploaded to a server, stored online, or seen by anyone else. There is no account, no email address, and no history.

That makes the tool safe on a shared computer or a public network, because your writing never travels over the internet at all. A document, a draft or a personal note stays on your own device from start to finish.

Tips For The Best Find And Replace Text Results

A few small habits will make your replacements more accurate. If your next job is a different kind of document job, the Image to Word tool can help.

  • Check the match count before you copy, because a count of 0 means the find word did not match anything.
  • Tick “Whole words only” when the find word sits inside other words, because “cat” also matches inside “concatenate”.
  • Try match case off first, because a name may appear in more than one case in the text.
  • For a job that also needs a Word file as a web page, the Word to HTML tool turns a Word document into web code for you.
  • Copy the changed text before you leave the page, so you do not have to paste the text again.

After you copy the result, paste it where the job needs it, and check the first and last matches. If your next job is a different kind of file job, the Any Document tool turns almost any document into a PDF for you.

More Tools For The Same Job

Find and Replace Text handles this job well, but sometimes a different tool fits better. These related tools solve the same kind of problem.

  • Text to PDF: if your job also needs a PDF, this tool turns any text into a PDF for you.
  • PDF to Text: if your job also needs text from a PDF, this tool pulls the words out of a PDF for you.
  • Word to PDF: if your job also needs a Word file as a PDF, this tool turns a Word document into a PDF for you.
  • Text to ASCII: if your job also needs text turned into codes, this tool turns readable text into character codes for you.
  • ASCII to Text: if your job also needs codes turned into text, this tool turns character codes into readable text for you.
  • PDF to Word: if your job also needs a PDF as a Word file, this tool turns a PDF into an editable document for you.
  • Image to Word: if your job also needs text from a picture, this tool reads text from an image for you.
  • Word to HTML: if your job also needs a Word file as a web page, this tool turns a Word document into web code for you.
  • Any Document to PDF: if your job also needs a document as a PDF, this tool turns almost any document into a PDF for you.
  • Link to PDF: if your job also needs a web page as a PDF, this tool turns a web page into a PDF for you.

Frequently Asked Questions About The Find And Replace Text Tool

Here are the answers to the questions people ask most.

Do I Need To Install Anything?

No. Find and Replace Text runs in your web browser. You do not need to download or install any app, and it works on phones, tablets, and computers.

How Many Matches Are Replaced In “The Cat Sat On The Cat Mat”?

Two matches are replaced. Finding “cat” and replacing it with “dog” gives “The dog sat on the dog mat”. Finding “CAT” with match case on replaces 0, because the capitals do not match.

Does “Cat” Match Inside “Concatenate”?

It does, unless “Whole words only” is ticked. With that option on, finding “cat” in “concatenate the cat” replaces only the whole word, so 1 match is replaced.

Is My Text Uploaded Anywhere?

No. The replacement happens in your browser on your own device. Your text is never uploaded to a server, so it stays completely private.

Find and Replace Text finds words in any text and replaces them all at once, in seconds. As a find and replace tool, it changes every match at once. Paste the text, type the find and replace words, copy the changed text, and the job is done. It is free, it needs no install, and it works on any phone, tablet, or computer.

Is Find and Replace Text by TechnSols Free?

Yes, Find and Replace Text by TechnSols is completely free to use. You can find words in any text and replaces them all at once in seconds as often as you need, with no account, no sign up, and no payment. The tool runs in your browser, so there is nothing to install.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement