TechnSols
Advertisement

Frequency Generator

Play any tone free online with this frequency generator. Choose sine, square or sawtooth from 20 Hz to 20 kHz, with no install and no sign-up.

Be the first to rate this tool

Nearest note: A4

Set a frequency and press Play Tone.

What Is Frequency Generator?

Frequency Generator is a free online tool by TechnSols that plays a pure tone at any frequency you choose, from 20 Hz to 20,000 Hz. Type the number, pick a waveform, and hear the tone at once.

Advertisement

A tone generator is the simplest sound tool there is, and it is the one every other audio job starts from. Speaker makers test drivers with it, teachers show what a hertz means with it, and musicians tune instruments to it. A frequency is simply how many times a sound wave vibrates each second, measured in hertz, so a tone at 440 Hz vibrates 440 times a second. The OscillatorNode Guide page from MDN explains the oscillator behind this tool: a node that makes a repeating wave at the frequency you ask for, with no audio file involved.

Teachers play 440 Hz so a class can hear concert pitch, engineers sweep a speaker to find where it rattles, and curious listeners find out where their own hearing stops at the top end. When a tone also needs saving as a file, the Audio To WAV tool keeps it as a WAV.

How To Use Frequency Generator?

Here is how to play a tone in three quick steps. Using Frequency Generator is simple. There is no software to install and no account to make. Set the frequency, pick the waveform, and press Play. If the tone needs checking through a microphone, the Audio To MP3 tool tests it first.

Step 1: Set The Frequency

Drag the slider or type a number from 20 to 20,000 Hz. The nearest note appears under the controls, so 440 Hz reads as A4, 220 Hz reads as A3, and 880 Hz reads as A5, because every octave up doubles the frequency.

Step 2: Pick A Waveform

Choose sine for the purest tone, triangle for a soft hollow tone, square for a buzzy tone, or sawtooth for the harshest one. The same frequency sounds different in each waveform, because each one carries a different mix of harmonics above the main tone.

Step 3: Press Play Tone And Listen

Press Play Tone and the sound starts at once. Start with the volume low, especially at very low or very high frequencies, where ears are least sensitive and loud levels can damage hearing or speakers. Press Stop when you are done, or download the tone as a 5 second WAV file.

The whole job takes seconds, because there is nothing to configure and no file to load. Change the frequency while the tone is playing and the pitch slides to the new value at once. When a generated tone also needs a different format, the Microphone Tester tool converts it afterwards.

Why Frequency Generator?

A tone you can set to the hertz is a measuring instrument, not just a sound. It tells you what a speaker can do, what an ear can hear, and what a note really is. If a tone file also needs converting afterwards, the Audio Format tool handles the next step.

One Hertz At A Time

Typing an exact frequency gives you an exact test. A speaker that rattles at 120 Hz and not at 110 Hz has a fault at 120 Hz, and a hearing test that stops at 15 kHz says something real about the listener. A slider alone could never find those numbers.

Waveforms Teach What Sound Is

The same 440 Hz tone sounds soft as a sine wave and harsh as a sawtooth, even though the pitch is identical. The difference is the harmonics, the extra tones stacked above the main one. The Frequency Guide page explains frequency itself: the count of wave cycles per second, which is the one number every tone on this page is built from.

Nothing To Download, Nothing To Break

The tone is made live in the browser, so there is no file to download, no app to install, and nothing to go out of date. The page works on a phone, a tablet, or a computer, and it keeps working after the page has loaded, even if the connection drops. A tone file that needs a different format goes through the MP3 Converter tool.

What Can You Do With Frequency Generator?

A frequency generator fits any job where a known tone is the tool. These are the jobs this tool handles best.

Test Speakers And Headphones

Play a slow sweep from 20 Hz to 20 kHz and listen for rattles, dropouts, and dead spots. The Sample Rate tool turns a test recording into a small file, so the fault can be shared with the seller.

Tune An Instrument To Concert Pitch

Play 440 Hz and tune to it, or play the exact frequency of any note and match it by ear. A violinist tunes the A string to 440 Hz, a guitarist tunes each string to its own frequency, and a choir warms up on a single steady note.

Teach What Frequency Means

A classroom can hear 100 Hz, then 200 Hz, then 400 Hz, and learn that doubling the frequency raises the pitch by one octave. The tone generator makes an abstract number into something the whole room can hear at once.

Quality And Settings

The generator covers 20 to 20,000 Hz, with sine, square, sawtooth and triangle waveforms, a volume control, and a nearest note readout. A tone can also be downloaded as a 5 second WAV file at the current frequency and waveform. If you also need the tone in another format, the WAV To Opus tool converts it without another upload.

Advertisement
  • Frequency from 20 Hz to 20,000 Hz, typed to the hertz.
  • Four waveforms: sine, square, sawtooth and triangle.
  • Nearest note shown for every frequency.
  • Volume control from silence to full, starting low.
  • Download the current tone as a 5 second WAV file.

There is one honest limit to know. This is a browser tone generator, not a calibrated signal source, so the loudness is not measured in decibels and the frequency, while exact, is only as accurate as your device clock. It is also not a medical device, so it cannot test hearing properly, and the MIDI To MP3 tool cannot make it one.

How Frequency Generator Works

The tool builds the tone from one oscillator node, one gain node and one analyser node, all connected in a chain. The oscillator makes a repeating wave at the frequency you set, the gain node sets how loud it is, and the analyser node lets the page prove the tone is really sounding. Changing the frequency while the tone plays retunes the oscillator live, so the pitch slides without stopping.

Each waveform is a different shape of the same wave. A sine wave is a single smooth curve with no harmonics, a triangle wave adds a little, a square wave adds the odd harmonics, and a sawtooth adds them all, which is why it sounds the harshest. The nearest note is worked out from the frequency with the twelve tone equal temperament scale, where A4 is 440 Hz and each semitone is the twelfth root of two apart.

Two limits are worth knowing. First, most speakers give up below about 30 Hz, and most adults stop hearing somewhere between 15 and 17 kHz, so the ends of the range are felt or missed rather than heard. Second, the WAV download is rendered offline in the browser at 44100 Hz, so it is an exact copy of the tone you heard, five seconds long, and it plays on any device. The analyser node also feeds the proof that the tone is sounding, because its frequency data rises above zero only while the oscillator is running.

Privacy

Everything you play stays in your browser. The Frequency Generator makes its tones on your own computer, and nothing you do is uploaded to a server, recorded, stored, or shared with anyone. The tool does its job and shows the answer, and that is all it does.

Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and nothing about your testing is kept. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.

Tips

A few habits make Frequency Generator work smoother, whether this is your first tone or your five hundredth.

  • Always start with the volume low, then raise it slowly.
  • Calibrate with a comfortable 1000 Hz tone first.
  • Use headphones for high frequencies, speakers roll off sooner.
  • Do not chase very low or very high tones at full volume.
  • Download the tone when you need the same test twice.

When the test is done, press Stop and the silence returns. If the tone also needs saving in another format, the DTS To WAV tool converts the WAV afterwards.

More Tools For The Same Job

These tools handle the same kinds of jobs: audio, sound, and music.

FAQ

Common questions about Frequency Generator, answered plainly.

Is Frequency Generator by TechnSols Free?

Yes, Frequency Generator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can use it as often as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

What Frequency Should I Start With?

Start with 440 Hz, the standard tuning note, at a low volume. It is easy to hear on any speaker, and it tells you at once whether the sound is working. From there, move to the frequency you actually need, such as 1000 Hz for a level check or 100 Hz for a bass test.

Why Does The Same Frequency Sound Different In Each Waveform?

The pitch is the same, but the harmonics are different. A sine wave has no harmonics, so it sounds pure and soft. A square wave adds odd harmonics, and a sawtooth adds all of them, so both sound harsher and brighter. The waveform changes the tone colour, not the pitch.

Can I Save A Tone As A File?

Yes, press Download 5s WAV and the current frequency and waveform are rendered as a five second WAV file on your device. The file plays on any player, and you can use it for testing without opening the page again. The render uses the same oscillator settings you hear.

Is This A Hearing Test?

No, this is not a medical device and it cannot test hearing properly. A real hearing test needs calibrated headphones, a quiet room, and a trained audiologist. This tool is for education, speaker testing, and curiosity, and a result here says nothing about your hearing health.

Type the number, pick the wave, and hear exactly what you asked for. A tone generator turns a number into a sound, and a sound into an answer, in seconds.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement