What Is Game Loot Table Simulator?
Game Loot Table Simulator is a free online tool by TechnSols that simulates loot drops from a loot table you edit yourself, so you can see how often each item really drops before players ever meet it. Type item names and weights, set the number of runs and a seed, press Simulate Drops, and the tool shows the drops per item, the observed rate next to the expected rate, and the expected runs to get the rarest item.
A loot table is a list of items with weights, and the weight of an item decides its chance to drop. A weight of 50 in a table that totals 100 means a 50 percent chance on every roll, while a weight of 5 means a 5 percent chance, or one drop in 20 runs on average. The simulator rolls the table thousands of times with a seeded random generator, so the same seed always gives the same result, and you can share that seed with a teammate to reproduce the exact same run. It is distinct from the live Probability Dice Simulator, which rolls dice only: that tool tests dice odds, while this tool tests a full weighted loot table with named items.
How To Use Game Loot Table Simulator?
Using Game Loot Table Simulator takes about a minute, with no software to install and no account to make. Edit the four prefilled items, set the runs and the seed, and simulate. If you need a single random pick first, the Random Number Generator gives you one quick roll while you plan the table.
Step 1: Edit The Loot Table And Weights
The table starts with four items: Common Sword at weight 50, Rare Shield at 30, Epic Helm at 15, and Legendary Blade at 5, which total 100 and give expected rates of 50, 30, 15, and 5 percent. Change any name or weight to match your own game, and keep at least two rows filled in. A weight is not a percent on its own: the tool divides each weight by the total of all weights, so weights of 10, 6, 3, and 1 give the same rates as 50, 30, 15, and 5.
Step 2: Set The Runs And The Seed
Set the runs to simulate, prefilled at 1000, and the seed, prefilled at 7. More runs give a sample closer to the expected rates, while fewer runs show how noisy a short farming session can be. The seed fixes the random draws, so running the same seed twice gives the same counts every time.
Step 3: Read The Results And Download The Files
Press Simulate Drops and read the results table. Each row shows the item, its weight, its expected rate, its drop count, its observed rate, and the expected runs to get one of it. The status line states the counts and the expected runs for the rarest item, which is 20 runs for Legendary Blade at 5 percent. Two file rows appear below the table, one CSV and one text summary, each with its own Download button, and a Download All button sits at the very bottom. If you need the CSV in another shape, the CSV To JSON Converter turns it into JSON in seconds.
The whole job is three steps, and the same table can be changed and simulated again as often as needed. Change any input and the old result clears at once, so a stale table is never shown next to new weights.
Why Test A Loot Table Before You Ship It?
A loot table looks fair on paper and feels unfair in play, and the gap between the two is where players quit. A 5 percent drop sounds generous until a player runs a boss 40 times without seeing it, and a 50 percent common drop sounds fine until it floods every inventory. Simulation shows the table as players will feel it, in counts and rates, before the first real player meets it.
Testing early is cheap and testing late is not. A table tuned after launch means angry players, patched rates, and apologies, while a table tuned before launch means a quiet release. The simulator gives you the numbers to defend a rate in a design review, because a count from 1000 seeded runs is evidence, not a guess. When the rates need a second opinion in percent form, the Percentage Calculator turns any weight into a share of the total.
Rare Drops Feel Unfair Without Numbers
Players do not feel an average, they feel their own streak. With a 5 percent drop, about 36 in every 100 players will still be empty handed after 20 runs, even though 20 runs is the average wait. Simulation shows the spread, so you can decide whether the rare item needs a higher rate, a pity rule, or a clearer message that the drop is rare by design.
A Small Sample Misleads Everyone
Ten test runs tell you almost nothing about a 5 percent drop, because ten runs will usually show zero legendary drops at all. A thousand runs settle the question, because the observed rates sit close to the expected rates and the noise is small enough to trust. When the counts across seeds still need averaging, the Average Calculator combines them into one figure.
Expected Runs Set Honest Farming Goals
Expected runs turn a percent into a promise a player can plan around. A 5 percent drop means 20 runs on average, a 15 percent drop means about 7 runs, and a 50 percent drop means 2 runs. The simulator prints the expected runs for every item, so the numbers in your guides match the numbers in your code.
What Can You Do With Game Loot Table Simulator?
Game Loot Table Simulator fits any game where a random roll hands out a reward. These are the jobs it handles best, from a first boss table to a live service economy.
Balance A Boss Drop Table
A boss drop table decides what a fight is worth, and a fight that pays badly stops being played. Put the boss drops in the table with their weights, simulate 1000 kills, and check that the common drops land near their rates while the rare mount or weapon stays rare but reachable.
Tune A Gacha Pull Table
A gacha table lives or dies on its top rarity rate, because players count their pulls and compare notes. Enter the pull weights, simulate 1000 pulls, and read the observed rates against the published rates. The simulation shows how many players will go 90 pulls without the top item, which is the number that decides whether the pity timer is generous enough. When pulls turn into paying players, the Conversion Rate Calculator turns the counts into a share.
Check A Chest Reward Mix
A chest that always pays the same mix gets boring, and a chest that pays wildly gets blamed. Put the chest rewards in the table, simulate a few hundred openings, and check the mix of common, rare, and epic rewards. The mix in the simulation is the mix your players will open.
Every job that starts with weights ends with counts, and this tool turns one into the other in seconds. That is the whole job, and it takes less than a minute for any table.
Quality And Settings
Five settings shape the simulation, and each one is simple to set.
- Loot table: 4 rows, each with an item name up to 80 characters and a weight from 1 to 10000.
- At least two rows must hold an item and a weight, or the tool asks for more.
- Runs: a whole number from 1 to 100000, prefilled at 1000.
- Seed: a whole number from 0 to 999999999, prefilled at 7.
- Outputs: one CSV with the full results table, plus one text summary.
The 100000 run limit keeps the simulation fast in the browser. A thousand runs is enough for most tables, because the observed rates at that size sit within a few points of the expected rates. When the results need combining with another table, the CSV Merger joins the downloaded files into one list.
How Game Loot Table Simulator Runs A Seeded Simulation
The simulator uses a seeded random generator called mulberry32. It starts from the seed you type, then produces a fixed stream of numbers between 0 and 1, one per run. Each run walks the table from the top, adding weights until the running total passes the drawn number, and the item it lands on is the drop for that run. The expected rate for an item is its weight divided by the total weight, and the expected runs to get one is 1 divided by that rate, so Legendary Blade at 5 percent needs 20 runs on average.
Two honest limits are worth knowing. First, the results are a sample, not a promise: a 1000 run sample varies by seed, and a real player may wait longer or shorter than the average. Second, the simulator models independent rolls only, so it does not model pity timers, bad luck protection, or rate up windows that change the odds as a player keeps trying. The Loot Tables guide explains drop maths and pity timers in more depth.
Privacy
Everything you type stays in your browser. Game Loot Table Simulator runs on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. The tool simulates the drops and builds the files locally, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears the table from memory. Your game design stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Game Loot Table Simulator work smoother. Before a playtest, the Gamepad Button Tester checks that every button still works.
- Start with 1000 runs, then try 10000 runs to see the rates settle.
- Run two seeds on the same table to see how much the counts move.
- Keep weights simple, such as 50, 30, 15, and 5, so the rates are easy to read.
- Check the rarest item first, because its expected runs drive player patience.
- Save the seed with the results, so a teammate can reproduce the same run.
When the observed rates sit close to the expected rates and the rarest item needs a fair number of runs, the table is ready to ship. If the name of a drop needs fresh ideas first, the Random Name Generator can spark a few options in seconds.
More Tools For The Same Job
These tools handle the same kinds of jobs: random rolls, rates, lists, and game design.
- Random Dungeon Map Generator: builds a dungeon map from a seed for your next level.
- Game Dialogue Tree Builder: plans branching dialogue with choices for your characters.
- Game Balance Probability Simulator: checks win rates and drop rates for balance tuning.
- Tilemap Editor: edits tile grids and layers for a game level.
- Probability Dice Simulator: rolls dice many times to test dice odds.
- Random Number Generator: draws a single random number in a range you set.
- Percentage Calculator: turns any weight into a share of the total.
- Average Calculator: averages counts across several simulation seeds.
- CSV To JSON Converter: turns the results CSV into JSON for another tool.
- Random Color Generator: picks colours for loot rarity tiers and item icons.
FAQ
Common questions about loot tables and the simulator, answered plainly.
Is Game Loot Table Simulator By TechnSols Free?
Yes, Game Loot Table Simulator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can simulate as many tables as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Does The Seed Do?
The seed fixes the random draws, so the same seed, table, and run count always give the same drop counts. Seed 7 with 1000 runs always gives 460, 337, 150, and 53 drops. Change the seed to get a fresh sample, and share the seed to let a teammate reproduce your exact result.
How Many Runs Should I Simulate?
Simulate 1000 runs for a quick check, because the observed rates then sit within a few points of the expected rates. Use 10000 runs when a rare item matters, since a 1 percent drop needs a large sample to show up fairly. Below 100 runs the counts swing widely and prove little.
Why Do My Results Differ From The Expected Rates?
The expected rate is the long run average, while your result is one sample of it. With 1000 runs, a 50 percent item may show 46 percent and a 5 percent item may show 5.3 percent, and both are normal. Run more runs or a second seed, and the observed rates move closer to the expected ones.
Can I Use My Own Item Names And Weights?
Yes, every row is editable: type your own item names and weights, up to 80 characters per name and weights from 1 to 10000. Keep at least two rows filled in, and the tool divides each weight by the total to get its rate. A Loot Box is one familiar place where weighted tables decide rewards.
Enter the weights, simulate the drops, and read the counts. A table that survives a thousand seeded runs is a table your players can trust.