What Is HTML Entity Decoder?
HTML Entity Decoder is a free online tool by TechnSols that decodes HTML entities to plain text. You copy a block of text from a web page, and instead of readable words you get a mess of codes. < where a bracket should be, & where an and should be, ' where an apostrophe should be. HTML Entity Decoder is a free online tool from TechnSols that turns HTML entities back into plain characters, so the text reads normally again. You paste the coded text, the plain text appears at once, and the whole job happens in your browser.
An HTML entity is a short code that starts with an ampersand and ends with a semicolon, and it stands for one character. The code < stands for the less than sign, & stands for the ampersand, and " stands for a double quote. Browsers read these codes and show the character, which is useful on a page but unreadable in plain text. The MDN guide to HTML entities explains how these codes work and why pages are full of them.
Decoding matters whenever coded text must become readable text again. A scraped web page, an exported feed, or an old email full of entities all need the same care. If the codes stay in place, the text is hard to read, hard to search, and hard to reuse. The Wikipedia page on character encodings explains how browsers store text as codes and why decoding turns it back into plain words.
How To Use HTML Entity Decoder
Using HTML Entity Decoder takes three simple steps. You do not need any skill beyond pasting text, and the whole job usually takes less than a minute. If your text starts life as a Word document, the Word to HTML tool turns it into HTML first, so you can decode the entities here.
Step 1: Paste Your Text
Paste or type the coded text into the box. The box takes anything from a single entity to a full page of coded text, and it reads the text exactly as you paste it. Paste from a web page, a feed or a code editor, and the tool keeps every space, line break and character in place.
Step 2: Decode The Text
The tool replaces every known entity with its character the moment the text is in the box. Named entities, decimal numbers and hex numbers are all decoded in one pass, and anything the tool does not know is left exactly as it is. If the decoded text also needs to sit inside a page head, the Meta Tags Generator tool builds the tags it needs, so the page is ready to publish.
Step 3: Copy The Result
Read the plain text and copy it with the Copy button. The result is ready to paste into any document, message or content editor, and it reads exactly as your readers will read it. If the page also needs structured data, the Schema Markup Generator tool builds it, so search engines understand the page too.
That is all there is to it. When coded text needs to read like plain text again, the tool decodes it in seconds, with nothing to install and nothing to learn.
Why Use HTML Entity Decoder?
Reading coded text by hand is slow and easy to get wrong. One missed entity leaves a strange code in the middle of a sentence. Here is why so many people decode first and use the text second.
Read Scraped Text Properly
Text copied from a web page often arrives full of entities. Decoding it turns the codes back into brackets, quotes and ampersands, so the text reads like normal writing. That one step keeps a copied passage readable instead of broken.
Clean Up Exported Feeds
An exported feed or a saved page can carry hundreds of entities in a row. Decoding the whole block at once clears them all, so the text is ready to edit, search or publish without a manual pass.
Fix Double Encoded Text
Text that was encoded twice shows codes like < instead of a bracket. Decoding once turns it into <, and decoding again gives the plain bracket, so the text can be fixed step by step.
What Can You Do With HTML Entity Decoder?
HTML Entity Decoder is useful whenever coded text must become readable text again. Here are some of the most common ways people use it.
Turn Coded Snippets Into Plain Text
A snippet copied from a page source is full of entities. Pasting it here and copying the decoded result gives you plain text that reads cleanly in any editor. If the snippet lives inside a PDF, the PDF to Text tool pulls the words out first, so you can decode them here.
Prepare Text For Publishing
A draft full of entities looks unfinished and confuses readers. Decoding the text once clears every code, so the draft is ready to publish. If the finished draft needs to become a file, the Text to PDF tool turns any text into a PDF.
Check What An Entity Means
A strange code in a document may hide a character you need. Decoding the text shows the real character at once, so you know what the code stood for. If the decoded text is long, the Character Counter tool counts its characters first, so you know it fits the field.
HTML Entity Decoder Quality And Settings
HTML Entity Decoder gives you one clear job, an exact result, and simple behaviour you can trust. The rules behind the tool are stated here so you can check the output yourself. Here is what the tool does.
- Named entities: the tool decodes the common named entities, from & and < to © and é.
- Numeric entities: decimal codes like ' and hex codes like ' are decoded too.
- Unknown left alone: an entity the tool does not know is left unchanged, never guessed.
- No install: the tool runs in your browser on any phone, tablet or computer.
- Copy button: one click copies the full result, ready to paste anywhere.
Paste the coded text and check the result against the characters you expect. The same rules apply to every job, so there is nothing new to learn when you switch from a single entity to a full page of text.
How HTML Entity Decoder Works
When you paste text, the tool reads your text from left to right and looks for entity codes. A code starts with an ampersand and ends with a semicolon, and the tool checks the part in between against its list of known names. If the code is a name like copy or eacute, the tool writes the matching character. If the code is a number, the tool reads the number as a decimal or a hex value and writes the character it stands for. The tool also reads the numeric part after a hash, so a decimal code and a hex code are both handled the same way. All other text passes through unchanged, so your words, numbers and line breaks stay exactly as they were.
For the input <p class="box">Tom & Jerry</p>, the tool gives <p class="box">Tom & Jerry</p>. The code © gives the copyright sign, and so does the named code ©. One honest limit applies: an unknown entity is left unchanged, so a code the tool does not know stays exactly as it is.
HTML Entity Decoder Privacy And Safety
Your text never leaves your device. HTML Entity Decoder runs completely in your browser, so no text is uploaded to a server, stored online, or seen by anyone else. There is no account, no email address, and no history.
That makes the tool safe on a shared computer or a public network, because your text never travels over the internet at all. A coded snippet, a brand name or a private note stays on your own device from start to finish.
Tips For The Best HTML Entity Decoder Results
A few small habits will make your decoding cleaner and your text safer. If the decoded text also needs to run backwards for a check, the Text Reverser tool reverses any text in one click.
- Decode the text before you edit it, because editing coded text means fixing codes instead of words.
- Decode twice if the text was encoded twice, because one pass only removes one layer of codes.
- If the decoded text has extra blank spaces, the Remove Extra Spaces tool tidies them in one click.
- Keep the coded original beside the decoded copy, so you can compare them if a character looks wrong.
- If the decoded text needs a word count, the Word Counter tool counts words, characters and lines.
After you copy the result, read it once from start to finish before you use it. A quick read catches any unknown entity the tool left unchanged, so nothing strange slips into the final text.
More Tools For The Same Job
HTML Entity Decoder handles this job well, but sometimes a different tool fits better. These related tools solve the same kind of problem.
- Word to HTML: if your text starts as a Word document, this tool turns it into HTML first.
- Meta Tags Generator: if your page needs meta tags, this tool builds them for the page head.
- Schema Markup Generator: if your page needs structured data, this tool builds it for search engines.
- PDF to Text: if your text lives inside a PDF, this tool pulls the words out of the PDF.
- Text to PDF: if your decoded text needs to become a file, this tool turns any text into a PDF.
- Character Counter: if you need the exact character count of any text, this tool counts characters with and without spaces.
- Text Reverser: if your text needs to run backwards, this tool reverses any text in one click.
- Remove Extra Spaces: if your text has extra blank spaces, this tool tidies them in one click.
- Word Counter: if you need the word count of a snippet, this tool counts words, characters and lines.
- Case Converter: if your text needs a different case, this tool changes text to upper, lower, title or sentence case.
Frequently Asked Questions About HTML Entity Decoder
Here are the answers to the questions people ask most.
Do I Need To Install Anything?
No. HTML Entity Decoder runs in your web browser. You do not need to download or install any app, and it works on phones, tablets, and computers.
Which Entities Does HTML Entity Decoder Decode?
The common named entities, including &, <, >, ", ', , ©, ®, ™, … and é, plus decimal numeric entities like ' and ©, and hex numeric entities like ' and ©.
What Happens To An Unknown Entity?
It is left unchanged. The tool never guesses what an unknown code means, so a code it does not know stays exactly as it is in the result.
Is My Text Uploaded Anywhere?
No. The decoding happens in your browser on your own device. Your text is never uploaded to a server, so it stays completely private.
HTML Entity Decoder turns HTML entities back into plain characters in seconds. Paste the coded text, copy the result, and the job is done. It is free, it needs no install, and it works on any phone, tablet, or computer.
Is HTML Entity Decoder by TechnSols Free?
Yes, HTML Entity Decoder by TechnSols is completely free to use. You can turn HTML entities back into plain characters as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.