TechnSols
Advertisement

Inventory Reorder Point Calculator

Work out your reorder point online free with Inventory Reorder Point Calculator. Daily usage, lead time and safety stock, no install or sign-up needed.

Be the first to rate this tool

Enter the daily usage, lead time and safety stock, then press Calculate Reorder Point.

What Is Inventory Reorder Point Calculator?

Inventory Reorder Point Calculator is a free online tool by TechnSols that works out the stock level at which you should place your next order, so the new delivery lands before the shelf is empty. Enter the average daily usage, the lead time, and the safety stock, and the tool gives the reorder point, the lead time demand, and the days of cover.

Advertisement

Running out of stock rarely comes from forgetting to order. It comes from ordering a few days too late: the stock left was not enough to cover the week the supplier needed to deliver. A reorder point turns order soon into a specific number. When stock falls to it, you order, and the stock you hold covers you until the new delivery arrives. The formula is simple: reorder point equals average daily usage times lead time, plus safety stock. The Inventory Turnover tool measures how fast stock moves, a different metric, while this tool tells you when to order.

The result is a trigger level, not an order quantity. It says when to order, not how many units to buy. That second question belongs to economic order quantity. Everything runs in your browser, and no stock figure is uploaded anywhere.

How To Use Inventory Reorder Point Calculator?

Using Inventory Reorder Point Calculator takes less than a minute, with no install and no account. Type three numbers and read the answer. The fields open with daily usage 10, lead time 7, and safety stock 20 filled in, so press Calculate Reorder Point to see the answer, 90 units, then replace the example with your numbers.

Step 1: Enter The Average Daily Usage

Type how many units you sell or use each day. Take the units sold over the last 60 to 90 days and divide by the number of days. Leave out days when the item was out of stock, or the average will understate real demand. The Average Calculator turns a sales total into a daily average in seconds.

Step 2: Enter The Lead Time And Safety Stock

Type the lead time in days, from placing the order to stock ready to sell, including receiving it and putting it away, not just the shipping. Use your observed lead time from the last few orders, not the quoted number, because real lead times often run longer. Then type the safety stock, the extra units you hold for busy weeks and late deliveries. Enter 0 when you hold none, and the reorder point will equal the lead time demand alone.

Step 3: Read The Result And Download The Summary

Press Calculate Reorder Point and read the lead time demand, the reorder point, and the days of cover. Add your current stock on hand and the tool tells you whether to reorder now or how many days you have until you reach the reorder point. Download the text summary with the Download button, and change any input for a new product: the old result clears at once. When the reorder point says it is time to order, the Purchase Order tool builds the order for the supplier.

Why Does Stock Run Out Without A Reorder Point?

Without a reorder point, ordering depends on someone noticing the shelf is low, and people notice late. The shelf looks fine on Monday and empty on Saturday, while the supplier needs a week to deliver. The gap between noticing and receiving is the stockout, and it costs sales and pushes buyers to a competitor. A reorder point fixes the trigger in advance. The Reorder Point page explains the idea and the formula as used in inventory control.

Lead Time Eats Stock While You Wait

Every order takes days to arrive, and you keep selling while you wait. Ten units a day over seven days means 70 units will leave the shelf while the delivery is on its way. That 70 is the lead time demand, and it is the largest part of the reorder point. Order below that number and the shelf will empty before the truck arrives. The calculator shows the lead time demand on its own line, so you can see how much of the reorder point is the wait itself.

Busy Days And Late Deliveries Need A Buffer

Demand is never steady, and deliveries are never on time. A busy week sells faster than average, and a supplier three days late leaves the shelf short for three extra days. Safety stock is the buffer that absorbs both. With safety stock of 20 on top of lead time demand of 70, the reorder point becomes 90, and the extra 20 cover two busy days at 10 units a day. Without any safety stock, the reorder point equals the lead time demand alone, and any delay or spike means a stockout. Set the buffer from your real history, not from a guess.

Too Much Stock Ties Up Cash

A reorder point set too high is a quieter problem, but it costs money all the same. Every extra unit on the shelf is cash that cannot be spent elsewhere, and slow stock gathers dust or ends up discounted. The reorder point keeps stock as low as it can safely go: enough to cover the wait plus the buffer, and no more. Check the price covers the holding cost with the Profit Margin tool.

What Can You Do With Inventory Reorder Point Calculator?

Inventory Reorder Point Calculator fits any small shop, online seller, or workshop that holds stock. These are the jobs it handles best.

Stop Stockouts On Your Best Sellers

Your best sellers are the products where a stockout hurts most, because they sell every day and their buyers will not wait. Work out the reorder point for each of them first, write it on the shelf edge, and check the stock against it every morning. A shop that does this for its top ten products will cut stockouts sharply without holding more stock overall. If the best seller needs a new code before it is reordered, the SKU Generator builds the code to put on the shelf edge with the number.

Plan Orders Around Slow Suppliers

A supplier who takes 30 days to deliver needs a much higher reorder point than one who takes 3 days. At 20 units a day, a 30 day lead time means 600 units of lead time demand before any safety stock. The calculator makes that gap visible, so a slow supplier becomes a number you plan around. When a supplier lead time creeps up, enter the new figure and the reorder point rises, so you order earlier. For the order itself, the Delivery Note tool records what arrives when the delivery lands.

Set A Different Point For Each Season

A product that sells three times as fast in November as in March needs a different reorder point for each season. One number will be too low in the busy season and too high in the quiet one. Work out the point for each season from that season daily usage, and switch between them as the pattern changes. The same applies to a promotion: work out the point from the promoted daily usage, so the promotion does not empty the shelf in two days. The return on the stock you hold can be checked with the ROI Calculator before you commit cash to a big seasonal order.

One reorder point per product is the rule. A single number for the whole shop hides the products that sell fast and the ones that sell slowly, and the fast ones will stock out while the slow ones gather dust. A worked example with current stock, lead time demand, and days until reorder is shown on the Reorder Point Calculator page from Qoblex, which uses the same formula as this tool.

Quality And Settings

The calculator has four inputs and one clear output, and every input is checked before the calculation runs. Daily usage must be more than 0 and no more than 1000000, lead time must be from 0 to 365 days, safety stock from 0 to 1000000, and current stock, when given, from 0 to 100000000. A value outside those ranges shows a plain message, and no result is shown until the inputs are valid.

Advertisement
  • Daily usage: average units sold or used per day.
  • Lead time: days from placing the order to stock ready to sell.
  • Safety stock: buffer units, 0 when you hold none.
  • Current stock: adds a reorder now or days until reorder status.
  • Rounding: the reorder point rounds up to whole units.

The rounding matters for small numbers. A raw result of 90.4 units becomes a reorder point of 91 units, because ordering at 90 would leave the shelf short by part of a unit on the busiest day. Days of cover is the reorder point divided by daily usage, so 90 units at 10 a day is 9 days of cover. This calculator deals in units only, never in money.

How Inventory Reorder Point Calculator Works

The calculator multiplies the average daily usage by the lead time to get the lead time demand, then adds the safety stock to get the reorder point. With daily usage of 10, a lead time of 7 days, and safety stock of 20, the lead time demand is 10 times 7, or 70 units, and the reorder point is 70 plus 20, or 90 units. The days of cover is 90 divided by 10, or 9 days. When current stock is given, the calculator compares it with the reorder point: at or below means reorder now, and above means the difference divided by daily usage is the days until reorder. The Sales Tax tool is the place to work out tax on the order, because this calculator deals in units only, never in money.

Two honest limits are worth knowing. First, the formula assumes usage and lead time stay roughly steady. Seasonal demand and variable lead times break that assumption, and those products need a separate reorder point per season or a larger safety stock. Second, the calculator cannot see your real stock. It trusts the figure you type, so a count wrong by 50 units makes the days until reorder wrong by five days at 10 units a day. Count the shelf before you trust the status.

Privacy

Everything you calculate stays in your browser. Inventory Reorder Point Calculator runs on your own computer, and nothing you type is uploaded to a server, stored, or shared with anyone.

Because no account is needed, there is no name, email, or history tied to what you do. Your stock figures stay yours, and nothing about them is kept, shared, or sold.

Tips

A few habits make this calculator work smoother.

  • Work out daily usage from the last 60 to 90 days of real sales.
  • Use the observed lead time from your last few orders.
  • Recalculate whenever usage or lead time changes noticeably.
  • Write the reorder point on the shelf edge.
  • Count the shelf before trusting the status.

When the reorder point is right and the shelf is counted, ordering becomes a habit. If the product needs a scannable code on the shelf edge, the Barcode Generator makes the code to print beside it.

More Tools For The Same Job

These tools handle the same kinds of jobs.

FAQ

Common questions about reorder points, answered plainly.

Is Inventory Reorder Point Calculator By TechnSols Free?

Yes, Inventory Reorder Point Calculator by TechnSols is free to use, with no account, no sign-up, and no usage limit. You can work out as many points as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

How Do You Calculate A Reorder Point?

Multiply average daily usage by lead time to get the lead time demand, then add the safety stock. For example, 10 units a day over 7 days is 70 units of lead time demand, and adding safety stock of 20 gives a reorder point of 90 units.

What Is The Difference Between A Reorder Point And Safety Stock?

Safety stock is the buffer you hold for busy weeks and late deliveries, and it is one part of the reorder point. The reorder point adds the lead time demand on top, and it is the stock level that tells you when to place the next order.

What Is The Difference Between A Reorder Point And EOQ?

The reorder point tells you when to order, while economic order quantity tells you how much to order. You need both: the reorder point stops you ordering too late, and economic order quantity stops you ordering too often or too much.

How Often Should I Recalculate My Reorder Point?

Recalculate whenever usage or lead times change noticeably, and at least every few months for items that sell steadily. Seasonal products need a different reorder point for the busy and quiet parts of the year, and a supplier whose lead times have crept up needs a higher one.

Enter daily usage, lead time, and safety stock, and read the number. When the stock falls to that number, place the order.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement