What Is SVG Shape Boolean Calculator?
SVG Shape Boolean Calculator is a free online tool by TechnSols that combines two SVG shapes with boolean operations. Paste two shapes or pick a preset circle, rectangle, or star, choose union, subtract, intersect, or exclude, and copy the result d value or download the finished SVG.
Icons and logos are rarely drawn in one stroke: they are built by adding shapes together, cutting holes out of them, and keeping only the overlap. Doing that by hand means redrawing outlines and guessing where edges cross, and a small error leaves a gap or a stray point. This calculator does the geometry for you, and it shows the result filled with the inputs dashed beside it. The SVG Editor opens the same drawing for wider edits, and the SVG Paths guide explains the path commands the calculator reads.
The fill rule can be set to nonzero or evenodd, which decides how holes and overlaps are filled, and presets make it easy to start from a circle, a rectangle, or a star. Nothing is uploaded to a server, and the result can be copied or downloaded in seconds. When the combined shape also needs to be seen on screen, the SVG Path Visualizer draws it so you can check its shape.
How To Use SVG Shape Boolean Calculator?
Here is how to combine two SVG shapes in three quick steps. Using SVG Shape Boolean Calculator is simple. There is no software to install and no account to make. Paste two shapes, pick an operation, and copy the result. If the drawing also needs a raster copy, the SVG to PNG turns it into a PNG at any size.
Step 1: Paste Two Shapes Or Pick Presets
Paste two shapes into the two inputs, or pick a preset circle, rectangle, or star for either side. Each shape can be a path d value or a basic shape, and the preview shows both inputs dashed in different colours.
Step 2: Choose An Operation And Fill Rule
Pick union, subtract, intersect, or exclude, then set the fill rule to nonzero or evenodd. Union merges both shapes, subtract removes the top shape from the one beneath, intersect keeps only the overlap, and exclude keeps everything except the overlap.
Step 3: Copy Or Download The Result
Check the filled result preview, then copy the result d value or download the finished SVG. If the result has more nodes than you expected, look at where the outlines cross, since new nodes appear at every crossing.
The whole job takes less than a minute, because the geometry is computed at once. A result that fills exactly as you intended is a result that is ready to use.
Why Combine Shapes With Booleans Online?
Combining shapes online beats redrawing outlines by hand because the intersections are exact. Two overlapping circles cross at precise points, and drawing the merged outline by eye leaves tiny gaps or overlaps that show at large sizes. The calculator finds every crossing and builds the new outline from them.
The cost of a hand built combination is a shape that is hard to edit and hard to cut: stray points, doubled edges, and holes that fill wrong. A boolean result is one clean outline with the holes in the right places, ready for a cutter, a font, or a logo file. The SVG Specification defines the path commands the tool works with, and the Image Converter changes the format of any image that still needs a raster form.
Build Icons From Simple Shapes
Most icons are simple shapes combined: a circle plus a rectangle makes a badge, a square minus a circle makes a ring. Booleans turn those building blocks into a finished icon without redrawing anything. When the finished icon also needs a print format, the SVG to EPS converts the SVG to EPS.
Cut Holes Into Badges And Logos
A badge with a round hole, a letter with a counter, or a logo with a cut out all need a subtract operation. The calculator removes the top shape cleanly and leaves a real hole that fills correctly.
Clean Up Self Intersecting Paths
A path from a font or a plotter file can cross itself, which makes it fill wrong and cut wrong. Running a union on it removes the overlaps and self intersections and leaves a single clean outline.
What Can You Do With SVG Shape Boolean Calculator?
A boolean calculator fits any job where two shapes must become one. These are the jobs this tool handles best.
Make A Badge With A Round Hole
Place a circle over a square, choose subtract, and the circle becomes a clean round hole in the badge. The result fills correctly under both fill rules, and it cuts cleanly on a machine.
Get The Overlap Of Two Outlines
Overlap two shapes and choose intersect to keep only the shared area. That overlap makes a lens, a leaf, or a Venn diagram segment without any manual tracing. When the overlap shape also needs a favicon, the Favicon Maker builds one from the combined SVG.
Build A Geometric Logo
Combine circles, rectangles, and stars with union and exclude to build a logo from pure geometry. The result is a single outline that scales, recolours, and prints cleanly at any size.
Quality And Settings
The calculator accepts two shapes, pasted or picked from presets, and it returns the result d value plus a live preview with the result filled and the inputs dashed. Four operations are offered, the fill rule is set by you, and the result can be copied or downloaded.
- Four operations: union, subtract, intersect, and exclude.
- Presets for circle, rectangle, and star shapes.
- Fill rule select: nonzero or evenodd.
- Live preview with the result filled and inputs dashed.
- Copy the result d value or download the SVG.
There are no other settings to learn, because the shapes, the operation, and the fill rule are the whole tool. Paste two shapes, pick an operation, and copy the result. If the combined shape also needs a CAD format, the SVG to DXF converts the SVG to DXF.
How SVG Shape Boolean Calculator Works
The two shapes are read entirely in your browser. The tool flattens curves into short straight segments within a small tolerance, combines the outlines as polygons, finds every crossing, and rebuilds the outline for the operation you chose. The result is then refitted to smooth curves, so a circle stays a circle and a star keeps its sharp points.
The fill rule decides how holes are painted. With nonzero, a region fills when the winding count is not zero, so the centre of a one line star is filled. With evenodd, a region fills when it is crossed an odd number of times, so the same star centre is a hole. That is why one result can look different under the two rules, and why the choice matters for badges and lettering. If a DXF drawing also needs to become an SVG, the DXF to SVG converts it back to SVG.
Two honest limits are worth knowing. First, boolean tools work on closed paths, and the shapes must overlap for the operation to mean anything, so a subtract with no overlap simply returns the first shape. Second, only path data is read, so transforms, strokes, clip paths, and text are not applied, and they must be converted to paths first.
Privacy
Everything you paste or edit stays in your browser. The SVG Shape Boolean Calculator runs on your own computer, and nothing you do is uploaded to a server, stored, or shared with anyone. The tool does its job and shows the answer, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears your work from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make SVG Shape Boolean Calculator work smoother, whether this is your first combination or your five hundredth.
- Make sure both shapes overlap before you run it.
- Try evenodd when a hole fills the wrong way.
- Check where outlines cross when nodes increase.
- Use presets to test an operation quickly.
- Keep the original shapes until the result is tested.
When the result fills exactly as you intended, it is ready to use. If the combined shape also needs a smaller raster file for the web, the Image to WebP converts it to WebP in seconds. A quick check at a large size catches most problems before they ship.
More Tools For The Same Job
These tools handle the same kinds of jobs: SVG files, paths, and vector shapes.
- SVG Editor And Previewer: opens and edits SVG files in the browser.
- SVG Path Visualizer: draws a path on screen so you can see its shape.
- SVG to PNG: turns an SVG into a PNG image at any size.
- Image Converter: changes an image into another format without touching the picture.
- SVG to EPS Converter: converts an SVG drawing into an EPS file for print.
- Favicon Maker: builds a favicon from any image or SVG.
- SVG to DXF Converter: converts an SVG drawing into a DXF file for CAD tools.
- DXF to SVG Converter: turns a DXF drawing into an editable SVG file.
- Image to WebP: converts an image into WebP for faster web pages.
- PDF to SVG Converter: turns a PDF page into an editable SVG drawing.
FAQ
Common questions about combining SVG shapes, answered plainly.
Is SVG Shape Boolean Calculator By TechnSols Free?
Yes, SVG Shape Boolean Calculator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can simplify, edit, and export as many files as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Do The Four Operations Do?
Union merges two shapes into one shape, subtract removes the top shape from the one beneath, intersect keeps only the overlap of the two, and exclude keeps everything except the overlap, which is the opposite of intersect. Each operation returns one clean outline you can copy or download.
Why Does The Result Have More Nodes?
New nodes appear where the outlines cross and where refitted curves split to stay within tolerance, since every crossing becomes a point on the new outline. A smaller tolerance keeps the curves closer to exact, but it adds more nodes, while a larger tolerance gives fewer nodes and a smoother result.
Can I Combine More Than Two Shapes?
The tool takes two shapes at a time, but a shape may hold several sub paths, so a complex shape still counts as one input. For more shapes, run the result as the first shape again with the next shape as the second, and repeat until every shape is combined.
Is My Shape Uploaded Anywhere?
No, everything runs in your browser and no file is uploaded to a server, so your shape data never leaves your own computer. You can paste shape data from any project safely, and closing the tab clears it from memory, with nothing stored or shared anywhere.
Paste two shapes, pick an operation, and copy the combined result. A shape that fills exactly as you intended is a shape that is ready, and that is the whole point of combining it this way. Keep the original until the result is tested in place.