TechnSols
Advertisement

Torque Unit Converter

Best torque unit converter free online. Change torque between newton metres, pound force feet and more, with no install and no sign up.

Be the first to rate this tool

Enter a value to convert.

What Is Torque Unit Converter?

Torque Unit Converter is a free online tool by TechnSols that changes torque between any units. Torque is the turning force that tightens a bolt, drives a wheel, and opens a stiff lid, and it is the number behind every torque wrench setting and every motor rating. A bolt tightened to 20 newton metres, a motor rated at 200 pound force feet, and a lug nut set to 100 newton metres all describe the same idea in different units, and a value in one of them means nothing in a calculation that expects another. Torque Unit Converter, a free online torque converter, changes torque between the torque units people actually use, newton metres, newton centimetres, kilonewton metres, pound force feet, pound force inches, kilogram force metres and ounce force inches, live in your browser, with no sign up and no file to upload. The physics behind the quantity is covered in the torque article, which explains how force and lever arm combine into a turning moment.

Advertisement

The tool fits the jobs where a turning force must be compared or checked. A mechanic converts a workshop manual setting from pound force feet into newton metres before picking up the wrench. An engineer checks a motor rating against a load. A student works out the torque on a door from the force on its handle. A buyer compares two drills by their rated torque. In each case the conversion is one short step, but a wrong factor turns a snug bolt into a snapped one on paper, so a tool that shows the converted value at once keeps the work honest.

How To Use Torque Unit Converter

There are only three steps. Type the torque, pick the two units, and read the converted value that appears live on the page.

Enter The Torque Value

Type the torque number into the value box. The number can be a whole number or a decimal, so 100, 73.76, 1.36 and 20 all work. If your number is a force rather than a torque, Torque Calculator works out the torque from the force and the lever arm first.

Pick The Two Units

Choose the unit your number is in from the From list, and the unit you want from the To list. Newton metres, newton centimetres, newton millimetres, kilonewton metres, pound force feet, pound force inches, kilogram force metres and ounce force inches are all there. The swap button between the two lists flips them in one tap. If you need other families as well, Unit Converter covers length, weight, temperature and more in one place.

Read And Copy The Result

The result shows live as you type, with no button to press. One hundred newton metres gives “100 N m = 73.7562 lbf ft”, and one pound force foot the other way gives “1 lbf ft = 1.3558 N m”. If the torque came from a push, Force Calculator works out the push from mass and acceleration first. The Copy result button copies the whole line, ready to paste into a report, a note, or a message.

That is the whole job. One number in, one converted number out, whether you need to convert torque for a workshop manual, a motor check, or homework, and the answer updates the moment you change anything, so you can see at once how a different unit changes the result.

Why Use Torque Unit Converter?

Torque is measured in units that belong to different workshops, and the same turning force can look very different in each. These are the reasons a converter earns its place.

One Twist, Many Units

Car manuals use newton metres, American manuals use pound force feet, and small mechanisms use pound force inches or ounce force inches. The same torque can be quoted in any of them, and the numbers look nothing alike until they are converted. A converter takes the unit you were given and gives back the unit your wrench uses.

It Stops Costly Mistakes

Mixing up pound force feet with pound force inches is a factor of twelve, and that is the difference between a bolt tightened correctly and a bolt tightened until it snaps. Converting in the tool, where the factor is applied for you, removes the most common slip in torque work.

It Keeps Comparisons Fair

Two motors, two drills, or two test results can only be compared in the same unit. A motor rated in pound force feet and another rated in newton metres cannot be judged side by side until one of them is converted, and the converter does that in a second.

What Can You Do With Torque Unit Converter?

Torque conversion sits at the centre of fastening, motors, and machines. These are the jobs people reach for it most.

Set A Torque Wrench Correctly

A workshop manual gives a torque in pound force feet and the wrench reads in newton metres, or the other way round, and the setting must be converted before the wrench is used. The converter moves the setting between the two so the bolt is tightened to the value the manual asks for. When the bolt size also matters, Length Converter changes the length units to match the same table.

Compare Motors And Drills

A motor rated in newton metres and another rated in pound force feet cannot be compared until one of them is converted, and the converter does that in a second. The higher number in the same unit is the stronger motor, and the comparison is honest. When the weight of the machine also matters, Weight Converter changes the weight units and Energy Converter changes the energy units to match.

Work Out A Turning Force From A Push

Torque is force times lever arm, so a push on a long handle gives more torque than the same push on a short one. The converter puts the torque into the unit the table uses, so a hand force can be checked against a rated torque. When the power behind the turn also matters, convert the power units to match.

Torque Unit Converter Quality And Settings

The results are exact factor conversions, and the quality of the answer depends on the number you type and the units you pick.

  • Results show to 4 decimal places, with trailing zeros trimmed, so 100 N m reads as exactly 73.7562 lbf ft and 1 lbf ft reads as exactly 1.3558 N m.
  • Every factor is a defined constant: one pound force foot is 1.3558179483314004 newton metres, one pound force inch is 0.1129848290276167 newton metres, and one kilogram force metre is 9.80665 newton metres.
  • One newton centimetre is 0.01 newton metres and one newton millimetre is 0.001 newton metres, so small torques convert exactly too.
  • The tool never rounds the number you type, so a value with three decimals stays a value with three decimals through the conversion.
  • No sign up, no account, and no file is uploaded, so the conversion happens entirely on your device.

The cleanest results come from real measurements and the right units. A torque guessed from memory gives a guessed tightness, so measure properly and use the same figures every time.

Advertisement

How Torque Unit Converter Works

The tool converts through newton metres as the base unit. Converting nm to lb ft is a division by 1.3558, and converting lb ft to nm is a multiplication by 1.3558. This newton metre converter uses the exact defined factors for every unit. Each unit has a fixed factor that says how many newton metres one of it is, so the result is your value times the From factor divided by the To factor. The pound force foot factor is the exact defined value, 1.3558179483314004, and the kilogram force metre factor is standard gravity, 9.80665. The SI units reference lists the base units these factors rest on.

Nothing is sent anywhere. The factors live in the page, the maths runs in your browser, and the result appears the moment you type. Change either unit and the answer updates at once, so you can check a conversion both ways without retyping the number.

Privacy

Your numbers never leave your device. The conversion runs entirely in your browser, with no upload, no server calculation, and no storage of the values you type.

There is no account and no tracking of your conversions. Close the page and the numbers are gone, exactly as if you had worked them out on paper.

Tips

A few habits make torque work faster and keep the numbers trustworthy.

  • Read the unit twice. Pound force feet and pound force inches differ by a factor of twelve, and a manual in the wrong one looks plausible until the bolt is checked.
  • Convert before you set the wrench. A setting of 20 pound force feet is about 27 newton metres, so set the wrench after the conversion, not before, and the bolt gets the torque the manual asks for.
  • Keep torque and force apart. Torque is force times a lever arm, so a torque in newton metres is not a force in newtons, and the two must never be used in place of each other.
  • Use kilogram force metres only for older tables. A table that reads in kilogram force metres is really reading a torque, so convert it to newton metres for any calculation.
  • Use the copy button for the result. Pasting “100 N m = 73.7562 lbf ft” into a report keeps the units beside the number, so nobody has to guess which unit the value is in. When the power behind the turn also matters, Power Converter changes the power units, when the job also involves pressure, Pressure Converter changes those units, and when it involves speed, Speed Converter changes the speed units the same way.

Torque is a small number with a big effect on the answer, so convert it carefully and the rest of the job follows.

More Tools For The Same Job

Ten more tools cover the jobs around this one, from other unit families to the calculators that use the converted value.

  • Density Converter: if a material weight must be worked out from its volume, a density converter changes the density between metric and imperial units.
  • Acceleration Converter: if a speed changes over time, an acceleration converter changes the rate between metres per second squared, g and more.
  • Frequency Converter: if a signal or a motor speed is quoted in hertz, a frequency converter changes it between hertz, kilohertz and revolutions per minute.
  • Force Unit Converter: if a push or a pull is quoted in pounds force, a force unit converter changes it into newtons and back.
  • Viscosity Converter: if a liquid is thick or thin, a viscosity converter changes its dynamic viscosity between pascal seconds and centipoise.
  • Radiation Dose Converter: if a dose is quoted in rad, a radiation dose converter changes it into gray and back.
  • Molar Mass Calculator: if a chemical formula needs its mass, a molar mass calculator works it out from the elements and their counts.
  • Concentration Converter: if a solution strength is quoted in moles per litre, a concentration converter changes it between molarity and mass per volume units.
  • Scientific Notation Converter: if a very large or very small number needs a shorter form, a scientific notation converter writes it as a mantissa times a power of ten.
  • Force Calculator: works out the push from mass and acceleration, so a force in newtons becomes the starting point for the torque on a bolt or a shaft.

FAQ

Short answers to the questions people ask most about torque and its units.

What Is Torque In Simple Words?

Torque is a turning force. Push on a door handle and the door turns, and the torque is the push times the distance from the hinges. A longer handle gives more torque from the same push. It is measured in newton metres, which means a force in newtons times a lever arm in metres.

How Many Newton Metres Is 1 Pound Force Foot?

Exactly 1.3558179483314004, which the tool shows as 1.3558 newton metres to 4 decimals. A pound force foot is the torque from one pound of force on a one foot lever, and it is the unit most American car manuals use.

What Is The Difference Between Torque And Force?

Force is a straight push or pull, while torque is that push applied at a distance from a pivot, which makes it turn. The same force gives more torque on a longer lever, so torque always needs a lever arm and force does not.

Why Do Torque Wrenches Use Newton Metres?

Because the newton metre is the SI unit for torque, and most car manuals outside the United States give their settings in it. A wrench that reads in newton metres matches the manual directly, so no conversion is needed at all.

Is My Data Saved Anywhere?

No. Your numbers are read in your browser and never sent to a server. There is no upload, no account, and no record kept of what you converted.

Is Torque Unit Converter by TechnSols Free?

Yes, Torque Unit Converter by TechnSols is completely free to use. You can convert between units of torque as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Torque is one twist and one conversion, and once the unit is right the rest of the job is simple arithmetic. Convert it here, copy the result, and use it with confidence.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement