TechnSols
Advertisement

UI Component Documentation Builder

Document UI components free online. Write props, states, and examples as a clear doc page, with no install and no sign-up.

Be the first to rate this tool

Name the component, add the props, and build the doc.

What Is UI Component Documentation Builder?

UI Component Documentation Builder is a free online tool by TechnSols that turns a component spec into a documentation page in your browser. You name the component, list its props, tick its states, and add examples, and the tool writes the doc page a developer or designer can follow without asking you.

Advertisement

Component docs fall behind because they live somewhere else, away from the component itself, and nobody updates them. The DocDeck guide to a documentation builder explains the same idea: a documentation builder takes a template, such as a component library, and generates a complete document from its sections, so the doc matches the component.

The doc page this tool builds covers the component name and purpose, a props table with name, type, default, and description, the states it supports, usage notes, and a code example. If the component must be drawn first, the Wireframe Builder tool draws that screen as a wireframe.

People use it to document a design system, to hand a component to a developer, to brief a new team member, or to write the reference for a component library. It suits a designer, a front end developer, or a team that builds the same buttons, cards, and forms again and again.

How To Use UI Component Documentation Builder?

Here is how to document a UI component online in three quick steps. Using UI Component Documentation Builder is simple. There is no software to install and no account to make. Name the component, add the props, and download the doc. If the doc must sit beside the project docs, the README Generator tool writes those docs in the same style.

Step 1: Name The Component And Its Purpose

Type the component name, such as Button or Card, pick its category, and write one or two sentences about what it does and when to use it. The purpose line matters most: a doc that cannot say when to use the component will not stop anyone from using the wrong one.

Step 2: Add The Props And States

Add each prop with its name, type, default value, and a short description, and tick the states the component supports, such as default, hover, focus, disabled, loading, and error. A prop with no description is a prop nobody will use correctly, so write the description in plain words.

Step 3: Add An Example And Download

Paste a short code example that shows the component in use, then press Build Doc to read the finished page, and download it as Markdown or HTML. The Markdown file suits a docs site or a repository, while the HTML file opens in any browser. If the doc must be checked for colour contrast, the Color Contrast Checker tool tests that pair for you.

The whole doc takes about fifteen minutes to write, and it saves hours of questions later. A component with a doc is a component a team can reuse, and that is the whole point of building the doc here.

Why UI Component Documentation Builder?

A doc page beats a chat answer because a chat answer is read once and lost, while a doc page is read by the next developer too. The doc fixes the props, the states, and the example in one place, so the tenth use of the component is as correct as the first. If the doc must be filed with the project README, the HTML Color Codes tool writes that README for you.

The reason component docs work is that reuse needs trust: a developer reuses a component only when they can see its props and states without reading its code. The uiguides guide to UX documentation tools makes the same point, that component level technical docs are the engineering side of a design system, and they sit beside the design intent.

Props In A Table, Not In Prose

A prop buried in a paragraph is a prop nobody finds, while a prop in a table is found in seconds. The doc lists every prop with its name, type, default, and description in one table, so a developer can scan it and start using the component at once. Tables are the whole format of a good component doc.

States Are Part Of The Contract

A button that has no disabled state will be built without one, and a form that has no error state will fail badly when it errors. The doc lists every state the component supports, so the developer builds them all, and the designer reviews them all. States are not decoration; they are part of what the component promises.

An Example Shows What Rules Cannot

A rule says use the primary button for the main action; an example shows the primary button in a real form, with its props set. The doc carries one example for that reason, because the example is what a developer copies first. If the example must be checked on a small screen, the Project Brief Generator tool tests that layout for you.

What Can You Do With UI Component Documentation Builder?

A component doc fits any team that reuses UI parts. These are the jobs this builder handles best.

Document A Design System

A design system is a set of components, and each one needs a doc page, or the system is just a pile of parts. Build one doc per component, and the system becomes usable by anyone, not just the people who built it. If the system needs a written brief too, the Meta Tags Generator tool writes that brief from the same facts.

Hand A Component To A Developer

A developer who receives a component with no doc must read the design file and guess the props, and the guess is often wrong. Hand over the doc page instead, and the developer gets the props, the states, and the example in one file. The handoff takes minutes, and the build comes back right the first time.

Brief A New Team Member

A new team member needs to learn the components fast, and a set of doc pages is the fastest teacher: each page says what the component does, which props it takes, and which states it supports. Reading the docs beats shadowing a senior for a week, because the docs never forget a prop.

Advertisement

Quality And Settings

The builder takes the component name, category, purpose, any number of props with name, type, default, and description, six states, usage notes, and a code example. The doc is built as a plain page with a props table, and it downloads as Markdown or HTML. If the component colours must be named first, the Accessibility Statement Generator tool reads those codes from a picture.

  • Props table: name, type, default, required, and description.
  • Six states: default, hover, focus, disabled, loading, and error.
  • One code example, shown as a code block in the doc.
  • Usage notes: when to use the component, and when not to.
  • Download as Markdown or HTML, or copy the whole doc.

There are no other settings to learn, because a doc is a component, its props, its states, and an example. Fill it in, read the doc, and download it when it is right.

How UI Component Documentation Builder Works

The builder reads the form and writes the doc section by section: the name and purpose first, then the props as a table, then the states as a list, then the usage notes and the example as a code block. The Markdown and HTML files are built in your browser, with no server involved. If the doc must be filed with the page tags, the Image Color Adjuster tool builds those tags for the page.

Two limits are worth knowing. The builder writes a doc from your answers, and it does not read your code: it cannot extract props from a codebase, because that needs a parser and a repository. It also stores nothing on a server, so the downloaded file is the only copy unless you save it yourself.

Privacy

Everything you type stays in your browser. The component details and examples are built on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. The doc is built in your browser and downloaded as a file, so it never leaves your device until you share it.

Because no account is needed, there is no name, email, or history tied to what you build. Closing the tab ends the session, and the browser clears the input from memory, while the downloaded file stays yours. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.

Tips

A few habits make UI Component Documentation Builder work smoother, whether this is your first doc or your fiftieth.

  • Write the purpose line first, because the props follow it.
  • Describe every prop in plain words, even the obvious ones.
  • Tick every state the component supports, not just the happy path.
  • Keep the example short: one use, not every use.
  • Revisit the doc when a prop changes, or the doc lies.

When the doc is ready, download it and file it with the component. If the doc must be explained to a client, the Responsive Design Tester tool writes that explanation as a short document.

More Tools For The Same Job

These tools handle the same kinds of jobs: writing, checking, and testing components.

FAQ

Common questions about documenting UI components, answered plainly.

Is UI Component Documentation Builder by TechnSols Free?

Yes, UI Component Documentation Builder by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can document as many components as you like, and everything you type stays in your browser, so nothing is uploaded or stored anywhere.

What Goes Into A Component Doc?

A good doc names the component and its purpose, lists every prop with its name, type, default, and description, names the states it supports, says when to use it and when not to, and shows one code example. This builder writes all of those sections from one form, so nothing is left out.

Can I Download The Doc?

Yes, the doc downloads as a Markdown file or an HTML file, and you can also copy the whole text to the clipboard. The Markdown file suits a docs site or a repository, while the HTML file opens in any browser as a finished page. Both are built in your browser.

Does It Read My Code?

No, this tool writes the doc from your answers, and it does not read your codebase. It cannot extract props from a repository, because that needs a parser and access to your code. Fill in the props yourself from what the component actually takes, and the doc will match the code.

How Many Props Should A Component Have?

As many as it needs, and no more: a button with three props is easy to use, while a card with twenty props is hard to learn. If a component needs many props, group them in the doc by purpose, and mark which ones are required. This builder takes any number of props, so the doc fits the component.

Name the component, add the props and states, and download the doc. A component with a doc is a component a team can reuse, and that is the whole point of building it here.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement