What Is Vector Field Explorer?
Vector Field Explorer is a free online tool by TechnSols that draws a vector field from two formulas you type: one for the horizontal push and one for the vertical push. Every point on the grid gets an arrow, and the arrows together show the flow the formulas describe.
A vector field gives every point in the plane a direction and a strength, like the wind on a weather map. The Wikipedia guide to the Vector field guide explains the same idea plainly: at each point there is an arrow, and the arrows together are the field.
This explorer is different from the live Scientific Calculator tool, which works out any calculation you type in. That tool answers with a number; this one draws the whole field, so a formula is understood as a flow instead of a single value.
People use it to see a whirlpool field, to check a gradient before a physics lesson, to show a class how arrows turn around a centre, or to test a formula by looking at its flow. It suits a student, a teacher, or anyone who wants to see a field instead of imagining it.
How To Use Vector Field Explorer?
Here is how to draw a vector field online in three quick steps. Using Vector Field Explorer is simple. There is no software to install and no account to make. Type the two formulas, press Draw, and read the arrows. If a single value also needs working out, the Unit Converter tool does that maths.
Step 1: Type The Two Formulas
Type the formula for the horizontal part, Fx, and the formula for the vertical part, Fy, using x and y. The classic whirlpool is Fx equals minus y and Fy equals x, and the boxes start with exactly that, so a field is already waiting.
Step 2: Press Draw And Read The Arrows
Press Draw and the grid fills with arrows: each arrow points in the direction the formulas give at that point, and longer arrows mean a stronger push. The whirlpool turns around the centre, and a radial field points straight out from it.
Step 3: Change The Density And Save A Picture
Change the arrow density to see more arrows or fewer, and press Save Picture to download the current view as a PNG. If a value in the field also needs converting, the Length Converter tool converts its units.
The whole drawing takes less than a minute, because the field appears the moment you press Draw. A field you can see is a field you can understand, and that is the whole point of drawing it here.
Why Vector Field Explorer?
Arrows on a grid beat a formula because a formula hides the flow, and the flow is the lesson. The explorer shows the whirlpool turning, so the field is seen as a motion instead of a pair of symbols. If the size of a push also needs measuring, the Speed Converter tool measures that length.
The reason a canvas is the right place to draw is that it gives the browser a grid of points to paint on, and an arrow is painted at each one. The MDN page on the Canvas API guide shows the same point from the code side: the canvas is a drawing surface, and the field is drawn by working the formulas out point by point.
The Whole Flow Is Visible At Once
A formula gives one arrow at a time, and the flow stays hidden. The explorer draws the whole grid in one go, so the whirlpool, the source, and the sink are all visible together, and the field is understood as a picture.
Arrow Length Shows Strength
Direction is only half the story, and length is the other half: a long arrow means a strong push, and a short arrow means a weak one. The explorer scales every arrow by the strength at its point, so strong and weak regions are easy to tell apart.
Presets Show The Classic Fields
A whirlpool, a source, a sink, and a saddle are the classic fields every student meets, and each one has a preset to try. Picking a preset fills the two formulas for you, so the flow is seen first and the formulas are understood after. If a ratio in the result also matters, the Area Converter tool works that ratio out.
What Can You Do With Vector Field Explorer?
A vector field explorer fits any job where a flow is part of the question. These are the jobs this explorer handles best.
See A Whirlpool Field Turn
A whirlpool field turns around its centre, and the arrows make the turn visible: each arrow points sideways from the centre, and the field spins. If a single value in the field also needs working out, the Fraction Calculator tool works it out.
Show A Gradient Before A Lesson
A gradient field points uphill, and drawing it shows the class where the hill is steep and where it is flat. The arrows point away from the low ground and crowd together where the slope is steep, which is the lesson in one picture.
Test A Formula By Looking At Its Flow
A formula that looks right in symbols can give a flow that looks wrong on the grid, and the drawing catches the mistake. Type the formulas, press Draw, and check whether the arrows do what you expected them to do.
Quality And Settings
The explorer draws a vector field on a canvas from any Fx and Fy formulas you type, using x and y, with powers, sin, cos, tan, sqrt, log, exp, and abs. Arrow density is adjustable, presets cover whirlpool, source, sink, and saddle, and the current view saves as a PNG. If a value also needs converting, the Ratio Calculator tool converts its units.
- Any Fx and Fy formulas, typed with x and y.
- Arrows on a grid, sized by the strength at each point.
- Arrow density adjustable from sparse to dense.
- Presets for whirlpool, source, sink, and saddle.
- Save the current view as a PNG picture.
There are no other settings to learn, because the two formula boxes are the whole tool. Open it, type the formulas, and press Draw.
How Vector Field Explorer Works
The explorer reads the two formulas with a small parser that understands numbers, x, y, brackets, powers, and the functions sin, cos, tan, sqrt, log, exp, and abs. It works both formulas out at every grid point, turns each result into an arrow with a direction and a length, and draws the arrows on the canvas. If a single value also needs working out, the Random Number Generator tool works it out.
Two limits are worth knowing. The explorer draws fields in the plane only: it does not draw 3D fields, and it does not follow a single particle along its path, because it shows the whole field at once instead of one journey through it. A formula that divides by zero at a point also leaves that point blank, because the value there has no answer. A whirlpool field is called a rotation field, because every arrow points at a right angle to the line from the centre, so the flow goes around and never in or out. A saddle field is named after a horse saddle: the flow comes in along one direction and goes out along the other, and the centre is the still point between them. A source field points straight out from its centre, and the arrows get longer further out, so the flow grows stronger as it moves away from the middle. A gradient field points uphill everywhere, so the arrows crowd together where the slope is steep and spread out where the ground is flat, which is how a map shows a hill.
Privacy
Everything you draw stays in your browser. The formulas are worked out on your own computer, and nothing you type is uploaded to a server, stored, or shared with anyone. The tool draws the field and shows the answer, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you draw. Closing the tab ends the session, and the browser clears the view from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Vector Field Explorer work smoother, whether this is your first field or your fiftieth.
- Start with the whirlpool preset, because its flow is easy to read.
- Raise the density when you want to see fine detail in the flow.
- Lower the density when the arrows crowd each other out.
- Try a source preset to see arrows pointing straight out.
- Save a picture of a field you want to keep for a lesson.
When the field has been seen whole, its flow is a picture in your mind. If a value also needs converting, the Time Duration Calculator tool converts its units.
More Tools For The Same Job
These tools handle the same kinds of jobs: fields, flows, and numbers.
- Scientific Calculator: works out a value for any formula.
- Unit Converter: converts a measurement between units.
- Length Converter: converts a length between units.
- Speed Converter: converts a speed between units.
- Area Converter: converts an area between units.
- Volume Converter: converts a volume between units.
- Fraction Calculator: works out fractions step by step.
- Ratio Calculator: works out a ratio between two numbers.
- Random Number Generator: picks random numbers in a range.
- Time Duration Calculator: works out the time between two moments.
FAQ
Common questions about drawing vector fields, answered plainly.
Is Vector Field Explorer by TechnSols Free?
Yes, Vector Field Explorer by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can draw as many fields as you like, and everything is drawn in your browser, so nothing is uploaded or stored anywhere.
What Is A Vector Field?
A vector field gives every point in the plane an arrow, with a direction and a strength, like the wind on a weather map. The two formulas you type decide each arrow: Fx is the horizontal push and Fy is the vertical push at that point.
What Formulas Can I Type?
You can type any formula using numbers, x, y, brackets, powers with the caret, and the functions sin, cos, tan, sqrt, log, exp, and abs. The whirlpool preset is Fx equals minus y and Fy equals x, and a source is Fx equals x and Fy equals y.
Why Is One Point Blank?
A formula that divides by zero at a point has no value there, so that point is left blank instead of showing a wrong arrow. The rest of the field still draws, and the blank point is usually the centre of a source, a sink, or a whirlpool.
Can It Draw A 3D Field?
No, it draws fields in the plane only, because it is a 2D explorer for the fields students meet first. It also does not follow a single particle along its path, since it shows the whole field at once instead of one journey through it.
Type the two formulas, press Draw, and read the arrows. A field you can see is a field you can understand, and that is the whole point of drawing it here.