TechnSols
Advertisement

Capacitance Calculator

Capacitance Calculator free online. Find capacitance, charge or voltage with Q equals CV in your browser, fast and free, no sign up.

Be the first to rate this tool

Enter the two known values.

What Is Capacitance Calculator?

Capacitance Calculator is a free online tool by TechnSols that finds charge, voltage or capacitance. A capacitor stores charge, and the link between the three numbers is short: charge equals capacitance times voltage. If you know any two of them, the third is fixed, and that is exactly what this tool works out. Capacitance Calculator finds capacitance from charge and voltage, charge from capacitance and voltage, or voltage from charge and capacitance, the moment you type the two you know. Charge is typed in microcoulombs, capacitance in microfarads, and voltage in volts, and the answer shows live on the page with the two numbers you entered beside it. The relation is set out in the capacitance article, which defines capacitance as charge over voltage and covers the units in full.

Advertisement

The tool fits the jobs where a capacitor is being chosen, checked or understood. A hobbyist sizing a capacitor for a power supply filter needs to know what capacitance holds enough charge at the working voltage. A student checking homework needs to see whether the charge on a capacitor matches the theory. Someone repairing a circuit needs to know what voltage a capacitor of a known size will reach with a given charge. In each case the maths is one short step, but a slip in the units can throw the answer by a factor of a million, so a tool that keeps the units straight is worth having open while you work.

How To Use Capacitance Calculator

There are only three steps. Pick what to find, type the two known values, and read the result that appears live on the page.

Pick What To Find

Start by choosing the value you need from the list at the top. Choose capacitance if you know the charge and the voltage, charge if you know the capacitance and the voltage, or voltage if you know the charge and the capacitance. The two field labels change to match your choice, so you always know which number goes where. If your numbers are in other units, Unit Converter changes them into microcoulombs, microfarads and volts first.

Enter The Two Known Values

Type the two numbers you know into the two fields. Charge is typed in microcoulombs, capacitance in microfarads and voltage in volts, and the labels always show the unit beside the field. Use the values from the part datasheet, the circuit diagram, or your own measurements, and type them exactly as they are written. For the powers of ten the micro units use, Scientific Calculator handles the heavier maths in one place.

Read And Copy The Result

The result shows live as you type, with no button to press. When both fields are filled, you see the missing value in its unit, with the two numbers you entered listed underneath, so the whole calculation is visible in one place. A worked example helps: 1,000 microcoulombs at 10 volts gives “Capacitance: 100 µF”, “Charge (µC): 1000”, “Voltage (V): 10”. The Copy result button copies all of that in one go, ready to paste into a note or a message. If you want the time the charge lasts in a circuit, Time Unit Converter changes time between seconds, minutes and hours.

That is the whole job. Two numbers in, one clear answer out, and the answer updates the moment you change anything, so you can see at once how a higher voltage would change the result.

Why Use Capacitance Maths?

Three numbers and one short formula run most of the capacitor work people do by hand. These are the reasons it stays the first thing anyone reaches for.

One Formula Covers Everything

Charge, capacitance and voltage are locked together by a single relation, so there is no separate rule to learn for each case. Find the missing value by rearranging the same formula, and the answer is exact. That simplicity is why the relation is taught first in every electronics course that touches capacitors.

It Keeps Capacitors Safe

A capacitor pushed past its rated voltage can fail loudly and damage the board around it. Working out the voltage a charge will reach before the part is connected shows the danger in advance, while the circuit is still on paper. A part chosen from the calculation costs little, while a burst capacitor costs far more.

It Settles Sizing Guesses

A filter capacitor that is too small lets ripple through, and one that is far too large wastes money and board space. Working out the capacitance a charge and a voltage actually need shows the right size directly, instead of guessing from a rule of thumb and hoping the ripple stays low.

What Can You Do With Capacitance Calculator?

The result is a single number with its unit, but the uses around it are practical and everyday. These are the ones people come back for.

Find The Capacitance You Need

If a capacitor must hold a known charge at a known voltage, calculate capacitance by dividing the charge by the voltage, and the capacitance follows. A charge of 1,000 microcoulombs at 10 volts needs 100 microfarads, so a standard 100 microfarad part does the job. To see the result as a share of a larger value, Percentage Calculator turns any part into a percent of the whole.

Work Out The Charge On A Capacitor

If a capacitor of a known size sits at a known voltage, multiply the two and the charge follows. A 100 microfarad capacitor at 25 volts holds 2,500 microcoulombs, which tells you how much charge the circuit must supply to charge it. For the mean of several meter readings, Average Calculator works it out from any list you type.

Find The Voltage A Charge Reaches

If a known charge is put onto a capacitor of a known size, divide the charge by the capacitance and the voltage follows. A charge of 500 microcoulombs on a 50 microfarad capacitor reaches 10 volts, which shows at once whether the part stays inside its rating. If the load power is what you are sizing for, Power Converter changes watts between units before you start.

Capacitance Calculator Quality And Settings

The tool is built to be exact and honest. It uses the standard form of the relation, it shows the inputs beside the answer, and it never changes a number you typed.

  • Three modes: find capacitance, charge or voltage, and the field labels change with the mode so you always know which number goes where.
  • Live result: the missing value appears as you type, with no Convert button and no Calculate button to press.
  • Two decimal places: the answer is shown to two decimal places, which is precise enough for bench work and homework alike.
  • Inputs shown beside the answer: the two values you entered are listed under the result, so the whole calculation is visible and easy to check.
  • Copy the result: the Copy result button copies the answer and both inputs in one go, ready to paste anywhere.

If a field is empty, the tool shows the plain status “Enter the two known values.” instead of guessing a number. That way you never see a result built on a missing value.

Advertisement

How Capacitance Calculator Works

The tool runs entirely in your browser. In capacitance mode it divides the charge in microcoulombs by the voltage in volts. In charge mode it multiplies the capacitance in microfarads by the voltage in volts. In voltage mode it divides the charge in microcoulombs by the capacitance in microfarads. The micro units cancel neatly, so no extra conversion is needed, and the three forms are the same relation rearranged. The capacitor article explains how the part is built and how its value is marked, which is where the numbers you type come from.

Once the missing value is worked out, the tool shows it to two decimal places with its unit, and lists the two inputs underneath. Because the maths runs on your device, nothing is uploaded and nothing is stored. The tool assumes an ideal capacitor with no leakage and no series resistance, which covers part selection and homework, but a real capacitor also has losses that this simple relation does not show.

Privacy

Your numbers never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.

That matters because circuit values can belong to a project you have not shared yet. This tool has no account, no upload, and no log, so your work stays private by design, not by promise.

Tips

A few small habits make the number you get back more useful and easier to trust.

  • Watch the micro units: microfarads and microcoulombs both carry the micro prefix, so keep the units straight, or the answer will be a million times out.
  • Time your bench sessions: Time Duration Calculator measures how long a test or a charge actually lasted, so the hours you plan match the hours you put in.
  • Count the days to your next build: Countdown Calculator tells you how many days are left until the parts arrive or the project is due.
  • Check the gap between tests: Date Difference Calculator works out how many days passed between two measurements, which helps when you compare them fairly.
  • Leave voltage headroom: a capacitor should be rated well above the voltage it will actually see, so pick a part rated at least twice the working voltage when you can.

The cleanest results come from real part values and the right units. Guessed charges give guessed capacitances, so read the datasheet properly and use the same figures every time.

More Tools For The Same Job

Ten more tools cover the jobs around this one, from the voltage across a capacitor to the runtime of a battery.

The Electrical Power Calculator works out watts, volts or amps.

  • Ohm’s Law Calculator: if you know two of voltage, current and resistance, an Ohm’s law calculator finds the third in one step.
  • Voltage Drop Calculator: if a long cable feeds a load far from the supply, a voltage drop calculator works out how much voltage the cable itself loses.
  • Resistor Color Code Calculator: if a resistor shows coloured bands instead of printed numbers, a resistor colour code calculator reads its value and tolerance from the bands.
  • Series Resistance Calculator: if several resistors sit in a row in one circuit, a series resistance calculator adds them into one total.
  • Parallel Resistance Calculator: if several resistors sit side by side across the same two points, a parallel resistance calculator works out the lower total they give together.
  • Electrical Power Calculator: if you want the watts a circuit uses, an electrical power calculator works it out from voltage and current.
  • Battery Runtime Calculator: if a battery must run a load for a set time, a battery runtime calculator works out how long the charge lasts.
  • Torque Calculator: if a motor turns a load, a torque calculator works out the turning force from the force and the lever arm.
  • Force Calculator: if a mass must speed up or slow down, a force calculator works out the push needed from mass and acceleration.
  • Power Converter: changes power between watts, kilowatts, horsepower and more, so a value from one datasheet matches the units in another.

FAQ

Short answers to the questions people ask most about capacitance.

What Is Capacitance In Simple Words?

Capacitance is how much charge a capacitor holds for each volt across it. A bigger capacitance holds more charge at the same voltage, and the charge in microcoulombs equals the capacitance in microfarads times the voltage in volts. That charge capacitance voltage link is the whole formula: Q = CV.

What Units Does The Tool Use?

Charge is typed in microcoulombs, capacitance in microfarads, and voltage in volts. A microfarad is a millionth of a farad, and a microcoulomb is a millionth of a coulomb, so the micro units cancel and the maths stays simple.

Can A Capacitor Hold Charge With No Voltage?

No. Charge and voltage rise together on a capacitor, so zero volts means zero charge. The charge only appears as the voltage across the plates rises, and it flows back out as the voltage falls.

Why Does My Capacitor Get Warm?

A real capacitor has a little series resistance and a little leakage, so charging and discharging it turns a small part of the energy into heat. At high frequencies or high currents that heat grows, which is why power capacitors need generous ratings and good cooling.

Is My Data Saved Anywhere?

No. Your numbers are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.

Is Capacitance Calculator by TechnSols Free?

Yes, Capacitance Calculator by TechnSols is completely free to use. You can find capacitance from charge and voltage as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Charge, capacitance and voltage are one short formula apart, and a capacitor calculator, or microfarad calculator, keeps the units straight. Learn the three forms, watch the micro units, and the capacitor in your hand stops being a guess.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement