What Is JSON Schema Validator?
JSON Schema Validator is a free online tool by TechnSols that checks a JSON document against its JSON Schema and lists every place where the document breaks the rules, with no install and no sign up. Paste the schema, paste the document, and the tool tells you whether the document is valid, and if it is not, exactly which field failed and why. It is a json schema validator that works in your browser, with nothing to install and nothing to pay for. It works as a json validator online for any document and any schema.
The problem is that a document can look right and still be wrong. A missing required field, a string where a number belongs, or a value below the minimum will pass a JSON syntax check and still break the system that reads it. Validating against the schema catches these mistakes before the data goes any further. The JSON Schema sets out the rules a schema can state, from required fields to value ranges, and this tool checks the document against all of them.
The check covers draft 2020-12, draft 2019-09, and draft-07 schemas, picked from the $schema key in the schema itself. A schema with no $schema key is checked as draft 2020-12. Each error is listed with the path to the field and the rule it broke, so a long document gives a short list of fixes. The validation runs on the Ajv engine, the same validator many servers use, so a pass here means a pass there too.
Use it to validate json against schema rules before you send it, to check json schema files you wrote by hand, and to test json schema validation on data from a feed or an API. It can check a config file against its contract, prove a payload matches the API, and show a teammate exactly what is wrong with a sample. The check takes seconds, and the report is ready to copy or download. A schema that is checked once can be reused for every document that follows, so the work of writing the schema pays for itself many times over. It can validate json schema files you wrote by hand, and the documents that must match them.
How To Use JSON Schema Validator
Here is how to validate JSON against a schema in three quick steps. Using JSON Schema Validator is simple. There is no software to install and no account to make. Paste the schema, paste the document, and read the verdict. The whole job takes less than a minute. If the document is messy, the JSON Validator checks its syntax first, so a typo does not look like a schema error.
Step 1: Paste Your JSON Schema
Paste the schema into the first box. It must be valid JSON itself, and it can declare draft 2020-12, 2019-09, or draft-07 in its $schema key. A schema that does not compile is reported at once, with the reason given. The JSON Formatter lays a messy schema out neatly when it is hard to read.
Step 2: Paste The Document To Check
Paste the JSON document into the second box. It can be an API payload, a config file, or a single record from a feed. The document is read on your device, so it never leaves your browser.
Step 3: Read The Verdict
The verdict appears at once: valid, or a list of errors with the path to each broken field. Fix the first error, paste again, and repeat until the verdict is valid. The XML XSD Generator builds a schema from a sample when you have data but no schema yet.
That is the whole job. Two pastes in, one verdict out, with every error named and placed.
Why Use JSON Schema Validator?
A syntax check only proves the brackets match. Here is why checking against a schema matters more. The schema check reads the document against the contract it was written for, so the verdict is about fitness, not just form. It works as a json schema tester that names every error, not just the first one.
Catches The Mistakes Syntax Misses
A document can be valid JSON and still be wrong for the system that reads it. A missing required field or a string in a number field will not show up in a syntax check, but the schema check names it at once.
Shows The Exact Field
Each error carries the path to the field that broke, like /address/postcode, so a long document gives a short list of fixes instead of a vague failure.
Proves A Payload Before You Send It
Sending a bad payload wastes a round trip and an error log. Checking it first means the data that leaves your machine already matches the contract.
What Can You Do With JSON Schema Validator?
One verdict goes anywhere a contract is checked. Here are three jobs this tool handles.
Check An API Payload Before Sending
An API expects a payload in a set shape. Paste the schema and the payload, and the tool proves the payload matches before a single request is sent. The JSON to CSV Converter turns the payload into a table when the result must be logged in a sheet.
Test A Config File Against Its Contract
A config file with a wrong value can take a service down. Check it against the schema first, and the bad value is caught while it is still a paste in a box. The YAML to JSON Converter turns a YAML config into JSON first when the config starts life as YAML.
Show A Teammate What Is Wrong
A sample that fails is easier to fix when the errors are listed. Copy the report and send it with the sample, and the other person sees the exact fields to fix. The CSV to JSON Converter turns a table of records into JSON when the data starts as a spreadsheet.
Quality And Settings
The validator checks the document the way a server would, and reports every error it finds. The rules it follows are simple and visible.
- The draft is picked from the schema’s $schema key: 2020-12, 2019-09, or draft-07. A schema with no key is checked as 2020-12.
- Every error is listed with its path and the rule it broke, up to ten in the report, so nothing hides.
- A schema that does not compile is reported as a schema error, not blamed on the document.
- Draft-04 schemas are refused plainly, because the engine does not support that old draft.
- Strict mode stays off, so real-world schemas with extra keywords still validate.
Every verdict comes from the Ajv engine, so a document that passes here passes the same check on a server.
How JSON Schema Validator Works
The tool parses both inputs with the browser’s own JSON parser, then picks the Ajv class from the schema’s $schema key. Ajv 2020 handles draft 2020-12, Ajv 2019 handles 2019-09, and draft-07 runs on Ajv 2019 with the official draft-07 meta-schema added. The schema is compiled first, so a broken schema is reported before the document is touched. Then the document is validated, and every error is collected with its path and message. A document with no errors returns a single valid verdict, and a document with errors returns the full list, so the user sees every problem in one pass.
The validation never sends anything anywhere. Both texts stay in the browser, the Ajv engine runs on your device, and the report is built from the errors Ajv returns. The Ajv Guide explains how Ajv compiles a schema and why a schema that compiles here will compile the same way on a server.
Privacy
Everything runs in your browser. Your schema and your document are never uploaded to a server, nothing is stored, and there is no account to make. JSON Schema Validator reads both texts on your own device, runs the check there, and shows the result on the same page. The tool runs entirely on your device, so even the field names never reach a server. Closing the tab ends the job completely.
No sign-up, no email address, and no tracking of the data you paste. The schema and the document stay yours from start to finish, which is how a validation tool should work. Your data is never sent, stored, or seen by anyone else.
Tips
A clear schema makes a clear verdict. These five habits help. Start with a valid schema, and fix the errors one by one.
- Paste the schema first and check that it compiles before you paste the document, so a schema error is not blamed on the data.
- When the document is long, the Regex Tester finds a value by pattern before you paste the document in.
- When the schema must travel as text, the URL Encoder/Decoder turns it into a safe string for a link or a message.
- When the verdict lists many errors, fix the first one and check again, because one wrong field can cause several errors at once.
- When the document starts as XML, the XML to JSON Converter turns it into JSON before you check it. Keep the schema as the backup.
Five small habits, and the verdict is valid on the first or second try.
More Tools For The Same Job
Validation is one step in working with JSON. These tools handle the jobs around this one.
The Protobuf Schema Validator checks a Proto file for syntax errors, bad field numbers, and missing types, and lists every problem it finds.
- JSON Schema Generator: builds a schema from a sample document when no schema exists yet.
- JSON Validator: checks that a document is valid JSON before you check it against a schema.
- JSON Formatter: lays out messy JSON with clean indentation so both texts can be read.
- XML XSD Generator: builds an XSD schema from an XML sample, the same idea for XML.
- YAML to JSON Converter: turns a YAML document into JSON when the data starts life as YAML.
- JSON to CSV Converter: turns a checked document into a table for a spreadsheet or a report.
- CSV to JSON Converter: turns a table into JSON when the data starts as a spreadsheet.
- XML to JSON Converter: turns an XML document into JSON when the data starts in XML.
- Regex Tester: tests a pattern before you rely on it in a schema or a search.
- JWT Decoder: reads a token payload as JSON when the document to check comes from a token.
Frequently Asked Questions
Five questions people ask before they validate a document, including which drafts the tool supports.
Is JSON Schema Validator Free To Use?
Yes. The validator is free, with no account and no sign-up. It works as a json schema checker for any schema and any document. Any schema and document that fit in the boxes check in your browser, and there is nothing to install.
Which JSON Schema Drafts Are Supported?
Draft 2020-12, draft 2019-09, and draft-07. The draft is picked from the $schema key, and a schema with no key is checked as 2020-12. Draft-04 is not supported by the engine, and the tool says so instead of guessing.
What Does An Error Look Like?
Each error names the path to the field and the rule it broke, like /age must be >= 0. Up to ten errors are listed in the report, with a count when there are more.
Does A Valid Verdict Mean The Data Is Correct?
It means the document matches the schema. The schema can only check what it states, so a rule the schema does not have cannot be checked. A good schema is the other half of a good verdict.
Will My Schema And Document Stay Private?
Yes. Both texts are read and checked in your browser and are never uploaded to a server. Nothing is stored, and closing the tab ends the job completely.
JSON Schema Validator proves a document matches its contract in seconds. Paste the schema, paste the document, and read the verdict with every error named. No install, no account, and no upload: the data never leaves your browser.
Is JSON Schema Validator by TechnSols Free?
Yes, JSON Schema Validator by TechnSols is completely free to use. You can check a JSON document against its JSON Schema and lists every place where the document breaks the rules as often as you need, with no account, no sign up, and no payment. The tool runs in your browser, so there is nothing to install.