TechnSols
Advertisement

Protobuf Schema Validator

Protobuf Schema Validator free online. Check any Proto file for syntax errors, bad field numbers and missing types, with no install and no sign up.

Be the first to rate this tool

Enter a Proto file to check.

What Is Protobuf Schema Validator?

Protobuf Schema Validator is a free online tool by TechnSols that checks a Proto file for syntax errors, bad field numbers, and missing types, and lists every problem it finds, with no install and no sign up. Paste the file, and the tool tells you whether it is a valid Protobuf schema, and if it is not, exactly which line and which field is wrong. It is a protobuf validator that works in your browser, with nothing to install and nothing to pay for. It works as a protobuf schema checker for any file you paste in.

Advertisement

The problem is that a Proto file is a contract, and one mistake breaks every service that uses it. A field number used twice, a message that refers to a type that does not exist, or a syntax line that is missing will pass a glance and fail the compiler. Checking the file first catches these mistakes before the schema is shared. The Protobuf Guide sets out the Protobuf format the checker follows, so a file that passes here compiles the same way everywhere.

The check covers proto2 and proto3 files. It parses the file with protobufjs, the library many tools use, and then walks every message, enum, and service. Field numbers are checked by hand for duplicates, because a duplicate number is the mistake a compiler reports last and a team finds first. A syntax error is reported with its line, so a long file gives a short job. The check takes seconds, and the report is ready to copy or download.

Use it to validate protobuf schemas before you share them, to check proto file syntax after an edit by hand, and to run a proto validator check on a file a teammate sent. It can prove a service contract is sound before the team builds against it, show exactly which fields need work, and stop a broken schema from reaching the build. The check is free, and the result never leaves your browser. A schema that is checked once can be trusted by every service that builds against it, so the work of checking it pays for itself many times over. You can validate proto3 files here, as well as proto2 files, with no setup and no account.

How To Use Protobuf Schema Validator

Here is how to validate a Proto file in three quick steps. Using Protobuf Schema Validator is simple. There is no software to install and no account to make. Paste the file, read the verdict, and fix the problems it names. The whole job takes less than a minute. If the schema is a list of records, the JSON Validator checks a JSON document when the data starts as JSON.

Step 1: Paste Your Proto File

Paste the Proto file into the box. It can be proto2 or proto3, with messages, enums, and services. The text is read on your device, so it never leaves your browser. A file without a syntax line is read as proto2, the default.

Step 2: Read The Verdict

The verdict appears at once: valid, with the count of messages, enums, services, and fields shown, or a list of problems with the place of each one. A duplicate field number is named with its message and number. The XML XSD Generator builds a schema from a sample when you have data but no schema yet.

Step 3: Fix And Check Again

Fix the named problems, paste the file again, and repeat until the verdict is valid. Press Download to save the report when the list must be shared. A JSON Formatter lays out a JSON document neatly when the next step needs JSON.

That is the whole job. One paste in, one verdict out, with every problem named and placed.

Why Use Protobuf Schema Validator?

A Proto file is a contract, and a broken contract wastes a build. Here is why checking it first matters. The Proto check reads the file against the Protobuf format it claims to follow, so the verdict is about the contract, not just the text.

Catches The Mistakes A Glance Misses

A file can look right and still hold a duplicate field number or a missing type. The checker walks every message, so the mistake is named instead of found at compile time.

Checks Field Numbers By Hand

A duplicate field number is the mistake that corrupts data on the wire. The checker counts every number in every message, so a clash is caught before the file is shared.

Proves The Contract Before The Build

A team that builds against a broken schema builds the wrong thing. Checking first means the schema the team reads is already sound.

What Can You Do With Protobuf Schema Validator?

One verdict goes anywhere a service is described. Here are three jobs this tool handles.

Check A Service Contract Before Build

A service starts from its Proto file, and a mistake in it reaches every client. Check it first, and the build runs on a schema that is already proven. The YAML to JSON Converter turns a YAML config into JSON when the service config starts in YAML.

Test A Schema After An Edit

A hand edit can add a field with a number already in use. Paste the file and check it, and the clash is caught while it is still a paste in a box. The CSV to JSON Converter turns a table into JSON when the data starts as a spreadsheet.

Show A Teammate What Is Wrong

A schema that fails is easier to fix when the problems are listed. Copy the report and send it with the file, and the other person sees the exact fields to fix. The XML to JSON Converter turns an XML document into JSON when the data starts in XML.

Quality And Settings

The validator parses the file the way a compiler would, and reports every problem it finds. The rules it follows are simple and visible.

Advertisement
  • The file is parsed with protobufjs, the library many tools use, so a pass here is a pass everywhere.
  • A syntax error is reported with its line, taken from the parser’s own message.
  • Every message is walked, and a field number used twice in one message is reported as an error.
  • Every enum value and service method is listed, so the report shows what the file holds.
  • A file with no syntax line is read as proto2, the default the format sets.

Every verdict comes from the protobufjs parser, so a file that passes here compiles the same way on a server.

How Protobuf Schema Validator Works

The tool hands the pasted text to protobufjs, which reads the file from the top down. The syntax line sets proto2 or proto3, and each message, enum, and service is parsed into a tree. Then the tool walks the tree by hand: it counts the fields in every message, checks each field number for a duplicate, and lists every enum value and service method. A file that parses and holds no duplicate numbers is valid, and the report lists what it holds. A file with no problems returns a single valid verdict, and a file with problems returns the full list, so the user sees every issue in one pass.

The validation never sends anything anywhere. The text stays in the browser, the parser runs on your device, and the report is built from the tree the parser returns. The Proto3 Guide explains the proto3 format in full, including how field numbers, types, and services are written.

Privacy

Everything runs in your browser. Your Proto file is never uploaded to a server, nothing is stored, and there is no account to make. Protobuf Schema Validator reads the text on your own device, runs the check there, and shows the result on the same page. The tool runs entirely on your device, so even the message names never reach a server. Closing the tab ends the job completely.

No sign-up, no email address, and no tracking of the data you paste. The schema you work with stays yours from start to finish, which is how a validation tool should work. Your data is never sent, stored, or seen by anyone else.

Tips

Clean numbers make clean schemas. These five habits help. Start with the syntax line, and check the field numbers before you share.

  • Write the syntax line first, because a file without one is read as proto2 and may not mean what you intended.
  • When a value must match a pattern, the Regex Tester checks it before you rely on it in a schema or a search.
  • When the schema must travel as text, the Base64 Encoder/Decoder turns it into a safe string for a URL or a message.
  • When the verdict names a duplicate number, give the new field the next free number, because reusing a number changes old data.
  • When the schema must be shared as a link, the URL Encoder/Decoder turns a long URL into a safe string for sharing. Keep the Proto file as the backup.

Five small habits, and the schema is valid on the first or second try.

More Tools For The Same Job

Validation is one step in working with schemas. These tools handle the jobs around this one.

You can also use the Avro Schema Validator, which checks an Avro schema for bad types, duplicate fields, and missing names, and reports the error with the library’s own message.

Frequently Asked Questions

Five questions people ask before they check a Proto file, including which versions the tool accepts. It works as a protobuf checker for any file, from a small message to a long service.

Is Protobuf Schema Validator Free To Use?

Yes. This proto file validator is free, with no account and no sign-up. Any Proto file that fits in the box checks in your browser, and there is nothing to install.

Which Protobuf Versions Are Supported?

Proto2 and proto3. The version is picked from the syntax line, and a file with no syntax line is read as proto2, the default the format sets.

What Does A Duplicate Field Number Mean?

It means two fields in one message share the same number. The number decides how the field travels on the wire, so a clash would corrupt the data, and the tool reports it as an error.

Does The Tool Check Imports?

No. The checker reads one file on its own, so an import of another file is not followed. Paste the file that holds the types the check needs, or check each file on its own.

Will My Proto File Stay Private?

Yes. The text is read and checked in your browser and is never uploaded to a server. Nothing is stored, and closing the tab ends the job completely.

Use it before every build, and a broken schema never reaches the services that depend on it. Protobuf Schema Validator proves a Proto file is sound in seconds. Paste the file, read the verdict, and fix the problems it names. No install, no account, and no upload: the data never leaves your browser.

Is Protobuf Schema Validator by TechnSols Free?

Yes, Protobuf Schema Validator by TechnSols is completely free to use. You can check a Proto file for syntax errors as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement