TechnSols
Advertisement

OpenAPI Schema Validator

OpenAPI schema validator free online. Check any OpenAPI 3 document for missing fields, bad paths and broken refs, with no install and no sign up.

Be the first to rate this tool

Enter an OpenAPI document to check.

What Is OpenAPI Schema Validator?

OpenAPI Schema Validator is a free online tool by TechnSols that checks an OpenAPI document for missing fields, bad paths, and broken references, and lists every problem it finds, with no install and no sign up. Paste the document, and the tool tells you whether it is a valid OpenAPI 3 document, and if it is not, exactly which path, operation, or reference is wrong. It is an openapi schema validator that works in your browser, with nothing to install and nothing to pay for. It works as an openapi validator for any spec you paste in.

Advertisement

The problem is that an OpenAPI document is long, and one small mistake breaks the whole contract. A missing info version, a path that does not start with a slash, an operation with no responses, or a $ref that points nowhere will pass a JSON check and still fail every tool that reads the spec. Checking the document first catches these mistakes before the spec is shared. The OpenAPI Spec sets out the OpenAPI 3 format the checker follows, so a document that passes here reads the same way everywhere.

The check covers OpenAPI 3.0 and 3.1 documents, in JSON or YAML form. It checks the info block, every path, every operation and its responses, every server entry, and every local $ref, and it compiles every schema object inside the document with the Ajv engine. A document that still says Swagger 2.0 is refused plainly, with a note that it is the old format. Each problem is listed with the place it was found, so a long spec gives a short list of fixes.

Use it to validate openapi documents before you publish them, to check openapi spec files a teammate wrote, and to run an openapi 3 validator check on a spec your generator produced. It can prove an API contract is sound before the team builds against it, show exactly which paths need work, and stop a broken spec from reaching the docs. The check takes seconds, and the report is ready to copy or download. A spec that is checked once can be trusted by every developer who builds against it, so the work of checking it pays for itself many times over. It works as an openapi checker for any spec, from a small API to a long contract.

How To Use OpenAPI Schema Validator

Here is how to validate an OpenAPI document in three quick steps. Using OpenAPI Schema Validator is simple. There is no software to install and no account to make. Paste the document, read the verdict, and fix the problems it names. The whole job takes less than a minute. If the document is JSON, the JSON Validator checks its syntax first, so a typo does not look like a spec error.

Step 1: Paste Your OpenAPI Document

Paste the document into the box, in JSON or YAML form. The tool reads JSON first and falls back to YAML, so either form works. The text is read on your device, so it never leaves your browser. The JSON Formatter lays a messy JSON document out neatly when it is hard to read.

Step 2: Read The Verdict

The verdict appears at once: valid, with the version and the path count shown, or a list of problems with the place of each one. A missing info title, a bad path, an operation with no responses, and a broken $ref are each named in turn. A URL Encoder/Decoder turns a long server URL into a safe string when the URL must be shared.

Step 3: Fix And Check Again

Fix the named problems, paste the document again, and repeat until the verdict is valid. Press Download to save the report when the list must be shared. The report holds up to ten problems, with a count when there are more.

That is the whole job. One paste in, one verdict out, with every problem named and placed.

Why Use OpenAPI Schema Validator?

A spec is a contract, and a broken contract wastes a team’s time. Here is why checking it first matters. The spec check reads the document against the OpenAPI format it claims to follow, so the verdict is about the contract, not just the text.

Catches The Mistakes JSON Misses

A document can be valid JSON and still be a broken spec. A missing info version or a $ref that points nowhere will not show up in a syntax check, but the spec check names it at once.

Checks Every Reference

A $ref that points to a component that does not exist breaks every tool that reads the spec. The checker resolves each local reference, so a broken link is caught before the spec is shared.

Proves The Contract Before The Build

A team that builds against a broken spec builds the wrong thing. Checking first means the spec the team reads is already sound.

What Can You Do With OpenAPI Schema Validator?

One verdict goes anywhere an API is described. Here are three jobs this tool handles.

Check A Spec Before Publishing

A spec goes into the docs, and a mistake in it reaches every reader. Check it first, and the published spec is already proven. The JWT Decoder reads a token payload as JSON when the API uses tokens for auth.

Test A Generated Spec

A generator can produce a spec with a missing field or a bad path. Paste the output and check it, and the generator’s mistake is caught before the spec is used. The JSON to CSV Converter turns a list of paths into a table when the spec must be reviewed in a sheet.

Show A Teammate What Is Wrong

A spec that fails is easier to fix when the problems are listed. Copy the report and send it with the spec, and the other person sees the exact paths to fix. The YAML to JSON Converter turns a YAML spec into JSON when the reader prefers JSON.

Quality And Settings

The validator checks the document the way a spec reader would, and reports every problem it finds. The rules it follows are simple and visible.

Advertisement
  • The document must declare OpenAPI 3.0 or 3.1. A Swagger 2.0 document is refused plainly, as the old format.
  • The info block must hold a title and a version, and every path must start with a slash.
  • Every operation must hold responses, and every response must carry a description.
  • Every local $ref must resolve to a part of the document that exists.
  • Every schema object inside the document is compiled with Ajv, so a broken schema is reported too.

Up to twenty-five problems are listed, so a spec with many mistakes still gives a full report.

How OpenAPI Schema Validator Works

The tool parses the pasted text as JSON first and falls back to YAML, so either form works. Then it walks the document in order: the openapi key, the info block with its title and version, the paths object with every path and operation, the servers list, and every $ref it finds. Each local reference is resolved against the document itself, and each schema object is compiled with the Ajv engine, so a schema that does not compile is reported with its place. A document with no problems returns a single valid verdict, and a document with problems returns the full list, so the user sees every issue in one pass.

The validation never sends anything anywhere. The text stays in the browser, the checks run on your device, and the report is built from the problems the checks return. The OpenAPI Initiative explains how the OpenAPI Initiative keeps the format, and why a spec that passes here reads the same way in every tool.

Privacy

Everything runs in your browser. Your OpenAPI document is never uploaded to a server, nothing is stored, and there is no account to make. OpenAPI Schema Validator reads the text on your own device, runs the check there, and shows the result on the same page. The tool runs entirely on your device, so even the path names never reach a server. Closing the tab ends the job completely.

No sign-up, no email address, and no tracking of the data you paste. The spec you work with stays yours from start to finish, which is how a validation tool should work. Your data is never sent, stored, or seen by anyone else.

Tips

A complete spec makes a clean verdict. These five habits help. Start with the info block, and fix the problems one by one.

  • Write the info title and version first, because a spec without them fails before any path is checked.
  • When a path pattern must be tested, the Regex Tester checks it before you rely on it in the spec.
  • When the spec must travel as text, the Base64 Encoder/Decoder turns it into a safe string for a URL or a message.
  • When the verdict lists many problems, fix the $refs first, because one broken reference can cause several errors at once.
  • When the data starts as XML, the XML to JSON Converter turns it into JSON before you write the spec. Keep the spec as the backup.

Five small habits, and the spec is valid on the first or second try.

More Tools For The Same Job

Validation is one step in working with APIs. These tools handle the jobs around this one.

  • JSON Schema Validator: checks a JSON document against its schema when the data has a contract.
  • JSON Schema Generator: builds a schema from a sample document when no schema exists yet.
  • JSON Validator: checks that a document is valid JSON before you check it against a spec.
  • YAML Validator: checks a YAML document the same way, for specs written in YAML.
  • JWT Decoder: reads a token payload as JSON when the API uses tokens for auth.
  • JSON Formatter: lays out a JSON document with clean indentation so it can be read.
  • YAML to JSON Converter: turns a YAML spec into JSON when the reader prefers JSON.
  • XML XSD Generator: builds an XSD schema from an XML sample, the same idea for XML.
  • URL Encoder/Decoder: turns a long server URL into a safe string for a link or a message.
  • Regex Tester: tests a pattern before you rely on it in a search or a schema.

Frequently Asked Questions

Five questions people ask before they check an OpenAPI document, including which versions the tool accepts.

Is OpenAPI Schema Validator Free To Use?

Yes. The validator is free, with no account and no sign-up. Any OpenAPI document that fits in the box checks in your browser, and there is nothing to install.

Which OpenAPI Versions Are Supported?

OpenAPI 3.0 and 3.1, in JSON or YAML form. A Swagger 2.0 document is refused plainly, because it is the old format and the checks are written for OpenAPI 3. It is not a swagger validator for the old format. To validate swagger 2.0 files, convert them to OpenAPI 3 first, then check them here.

What Does A $ref Error Mean?

It means a reference points to a part of the document that does not exist, like #/components/schemas/User when no User schema is defined. Fix the name or add the missing part, and the error clears.

Does The Tool Check The Schemas Inside The Spec?

Yes. Every schema object in the document is compiled with the Ajv engine, so a broken schema inside a path or a component is reported with its place.

Will My Spec Stay Private?

Yes. The text is read and checked in your browser and is never uploaded to a server. Nothing is stored, and closing the tab ends the job completely.

OpenAPI Schema Validator proves an API contract is sound in seconds. Paste the document, read the verdict, and fix the problems it names. No install, no account, and no upload: the data never leaves your browser.

Is OpenAPI Schema Validator by TechnSols Free?

Yes, OpenAPI Schema Validator by TechnSols is completely free to use. You can check an OpenAPI document for missing fields as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement