What Is Process Flow Designer?
Process Flow Designer is a free online tool by TechnSols that turns Mermaid flowchart code into a clean process flow in your browser. You list the steps and decisions, link them in order, and the tool renders the flow with start, steps, decisions, and end, ready to download.
A process flow, or flowchart, shows the steps of a process and the decisions between them: what happens first, what is checked, and where each answer leads. The flowchart is the standard picture for that map, and this designer draws it from plain text, so the flow lives in a file that version control can diff.
The renderer is Mermaid 11, the open source diagram library used by GitHub, GitLab, and Notion. If the messages behind these steps need a timeline too, the Sequence Diagram Editor tool draws them.
People use it to map an approval process, an onboarding flow, a refund process, and a support triage. It suits a first SOP for a small team, a hiring flow with three decisions, or a bug triage that must show every branch. The flow it draws is a picture, so it pastes into SOPs, handbooks, and tickets.
How To Use Process Flow Designer?
Here is how to design a process flow online in three quick steps. Using Process Flow Designer is simple. There is no software to install and no account to make. List the steps, render the flow, and download it. If the services the steps call need a map, the Architecture Diagram Maker tool draws them.
Step 1: Pick A Direction
Start with the line flowchart TD for a top to bottom layout, or flowchart LR for a left to right layout. A process with many steps usually reads best top to bottom, with the start at the top and the end at the bottom. A short process with two branches often reads best left to right.
Step 2: Add Steps And Decisions
Write one link per line, such as Start –> Receive –> Check{Approved?}, with plain steps in square brackets and decisions in curly braces. Add one link per answer from each decision, such as Check — Yes –> Approve and Check — No –> Reject, so every branch has a way out and the flow always ends.
Step 3: Render And Download
Press Render Flow. The tool checks the Mermaid code first, and if a line is wrong, the error names the problem, such as a missing arrow or an unclosed brace. A valid flow draws at once, with the decisions as diamonds and the steps as boxes. Check the summary line for the step and decision counts, then download the SVG or PNG. If the site the flow serves needs a map, the Sitemap Visualizer tool draws it.
The whole job takes a few minutes. A file built from a form is ready to use, and the steps above are the same every time.
Why Process Flow Designer?
A process described only in words is easy to misread: does the refund go back to the card before or after the return is checked, and who approves a discount. A flow puts the steps on one screen, so a missing branch, a decision with no No path, or a step with no way out is obvious. If the database the steps read needs a diagram, the ER Diagram Maker tool draws it.
The syntax it uses is the one developers already meet in docs. The flowchart syntax documents every node shape, arrow, and subgraph Mermaid supports, and this tool renders exactly that syntax. Code written here pastes straight into a GitHub README and renders the same way.
Every Branch Has A Way Out
A decision with only a Yes branch is a process that stops when the answer is No, and that stop is a bug in the process. In a flow, that decision has one arrow out, and the missing branch is visible. Adding the No branch is a process decision the diagram makes obvious.
The Flow Is The SOP
A written SOP with ten steps is a wall of text that nobody reads twice. A flow with ten boxes is a picture a new joiner can follow on day one, and a reviewer can check in a minute. A process drawn as a flow is a process people actually follow.
The Flow Stays Reviewable
Because the picture comes from text, a change to the process is a small diff in a pull request, and a reviewer can comment on the exact step that changed. If the ideas behind the steps need brainstorming first, the Mind Map Editor tool maps them.
What Can You Do With Process Flow Designer?
A process flow fits any procedure job, from an approval to a triage. These are the jobs this designer handles best.
Map An Approval Process
List the request, the check, the decision, and the two outcomes, with Yes leading to Approve and No leading to Reject. The flow shows both ways out, so a request is never stuck. A manager who has seen the flow once knows exactly where a request sits.
Map An Onboarding Flow
List the offer, the paperwork, the accounts, and the first day, with a decision for the background check. The flow becomes the checklist a new hire follows, and HR can see which step is missing. If the screens the hire sees need a sketch, the Wireframe Builder tool draws them.
Map A Refund Process
List the request, the return check, the decision, and the refund or the rejection, with the refund going back to the card. The flow shows the customer exactly what happens next, and support can follow it without guessing. A refund flow that is drawn is a refund flow that is consistent.
Quality And Settings
The designer accepts Mermaid flowchart code and renders it with Mermaid 11 in your browser, with no server involved. It counts the step nodes and the decision nodes in the code and shows the counts in the summary line, so you can check the flow holds what you wrote. A shape palette inserts ready lines for a start, a step, a decision, and an end, and templates cover an approval, an onboarding, and a refund flow. If the team that runs the process needs a map, the Organization Chart Maker tool draws it.
- Renders Mermaid 11 flowchart code, the same syntax GitHub uses.
- Plain steps in square brackets, decisions in curly braces, end in round brackets.
- Labelled arrows for each answer, such as Yes and No from a decision.
- Three ready templates: approval, onboarding, and refund flows.
- Downloads as SVG with real text, or as PNG for slides and docs.
There are no other settings to learn, because the input is Mermaid code and the output is one flow. List the steps, render, and download. If Mermaid reports an error, read the line it names, fix the code, and render again.
How Process Flow Designer Works
The designer takes the code you paste and asks Mermaid to parse it first, so a syntax error is reported with a plain message instead of a broken picture. A valid flow is rendered into SVG inside the page, and the tool counts step nodes and decision nodes for the summary line. The SVG is the same vector Mermaid draws, so the download is the flow itself, not a screenshot. If the network the process runs on needs a map, the Network Diagram Maker tool draws it.
Two limits are worth knowing. The tool draws a single flow with steps and decisions, and it does not draw swimlanes for different teams or roles: put the team name in the step label when it matters. It also renders with the default Mermaid theme, so the colours and fonts are fixed. For a styled flow, download the SVG and edit it in a design tool.
Privacy
Everything you type stays in your browser. The flow is rendered on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. Closing the tab clears the input, so the process details never leave your device.
Because no account is needed, there is no name, email, or history tied to what you design. Closing the tab ends the session, and the browser clears the input from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Process Flow Designer work smoother, whether this is your first file or your fiftieth.
- Start from a template, then rename the steps instead of writing from blank.
- Give every decision two ways out, Yes and No, so no path stops early.
- Keep step labels short, such as Check Return, not a whole sentence.
- Put the start at the top and the end at the bottom, in reading order.
- Keep the flow under fifteen steps, and split a longer process into two.
When the flow looks right, download the SVG and keep it next to the SOP, so the next change updates both together. If the classes behind the steps need a diagram, the UML Diagram Maker tool draws them.
More Tools For The Same Job
These tools handle the same kinds of jobs: mapping, drawing, and documenting processes and systems.
- Network Diagram Maker: maps the network a process runs across.
- Architecture Diagram Maker: maps the services the steps in the flow call.
- Sequence Diagram Editor: shows the same flow as messages over time.
- UML Diagram Maker: draws the classes behind the steps.
- Sitemap Visualizer: maps the pages a visitor flow crosses.
- ER Diagram Maker: draws the database the steps read and write.
- Mind Map Editor: brainstorms the steps before they become a flow.
- Wireframe Builder: sketches the screens each step shows.
- Organization Chart Maker: maps the team that runs the process.
- Gantt Chart Maker: plans the work the process describes on a timeline.
FAQ
Common questions about designing a process flow, answered plainly.
Is Process Flow Designer by TechnSols Free?
Yes, Process Flow Designer by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can design as many process flows as you like, and everything you type stays in your browser, so nothing is uploaded or stored anywhere.
What Is Mermaid Flowchart Code?
Mermaid flowchart code starts with flowchart TD or flowchart LR, then lists steps and their links, such as Start –> Check, and Check — Yes –> Approve. A step in square brackets is a plain step, and a step in curly braces is a decision with two ways out. The tool renders that text into a diagram.
How Do Decisions Work?
A decision is a step written in curly braces, such as Check{Approved?}, with one link per answer, such as Check — Yes –> Approve and Check — No –> Reject. Each answer is a labelled arrow, so the reader sees both ways out. A decision with no No branch is a decision that is not finished yet.
Does It Draw Swimlanes?
No, this tool draws a single flow with steps and decisions, and it does not draw swimlanes for different teams or roles. If a step belongs to a team, put the team name in the step label, such as Finance: Approve. For a lane per team, download the SVG and add the lanes in a design tool.
Can I Export The Flow?
Yes, you can download the flow as an SVG file, which stays sharp at any size and opens in design tools and browsers. You can also download a PNG for slides and docs. The SVG keeps the step names and labels as real text, so it stays searchable.
List the steps, draw the decisions, and render the flow. A process you can see is a process you can follow, and that is the whole point of designing it first.