What Is Route Elevation Profile Viewer?
Route Elevation Profile Viewer is a free online tool by TechnSols that draws the elevation against distance chart of a route, so you can see every climb and descent before you set out. It reports total ascent and descent, the highest and lowest points, and the distance, and it draws the profile as a chart you can read at a glance.
A route list tells you how far you will travel, but it hides how hard the travel will be. A flat ten kilometres and a hilly ten kilometres are the same distance and a very different day, and the profile chart shows that difference as a line rising and falling across the distance. Peaks, valleys, and long steady climbs are visible before the first step, which is what makes the chart worth drawing.
The tool takes two kinds of input. A GPX file already carries elevation in every track point, so GPX mode needs no API at all and works fully offline once the page has loaded. A plain list of coordinates has no heights, so coordinate mode looks them up from the free Open-Elevation service, which is limited to 500 coordinates per month per visitor IP, uses SRTM data on a 250 metre grid, and covers latitudes from 60 North to 56 South. If that free service is down, or the quota is used, the coordinate mode shows an exact error and the GPX mode still works. When you only need the totals without a chart, the GPS Elevation Gain Calculator reports them, and the GPX Track Simplifier thins a long track before you view it, while the GPX to CSV Converter turns the same file into a table.
How To Use Route Elevation Profile Viewer?
Drawing a route profile takes three quick steps. There is no software to install and no account to make. Give the tool a route, read the chart, and download the picture or the data. Everything runs in your browser, and no file is ever uploaded to a server.
Step 1: Upload A GPX File Or Paste Coordinates
Drop a GPX file onto the page, or choose it with the upload button, and the track is read in your browser with the elevation from every point. If you have no GPX file, paste a list of latitude and longitude pairs instead, and the tool will fetch their heights from the free Open-Elevation service. A GPX file from a watch, a phone, or a route planner is the best input, because its heights were recorded on the route.
Step 2: Read The Chart And The Totals
The chart plots elevation on the vertical axis against distance on the horizontal axis, so climbs rise to the right and descents fall away. Beside the chart, the totals show the total ascent, the total descent, the highest point, the lowest point, and the full distance. Hover over the chart to read the exact height at any distance, and find where the steepest climb starts.
Step 3: Download The Chart Or The Data
Download the profile chart as a PNG image to share in a trip report, a race briefing, or a geography lesson. Download the CSV of elevation points to work with the numbers in a spreadsheet, or to plot the profile again in another tool. The CSV to GPX Converter can turn a table of points back into a track file if the route needs to move to a GPS device.
The whole profile takes less than a minute for a normal track, and a very long track with thousands of points takes only a little longer. If the chart looks flat when the route is known to be hilly, check that the GPX file actually holds elevation data, because some exports drop it.
Why View An Elevation Profile Online?
An elevation profile turns a list of numbers into a picture the eye can read in seconds. Total ascent alone cannot show whether the climbing comes in one long slope or in ten short sharp bursts, and that difference decides pacing, gear, and water. The chart shows the shape of the effort, not just its sum, and that shape is what a walker, a cyclist, or a runner plans around.
Viewing it online means no desktop software, no install, and no account, and the file never leaves your device in GPX mode. The GPX Format page describes the file format that carries the track and its heights, and this tool reads that format directly in the browser.
Judge A Route Before You Commit
A route that looks easy on a flat map can hide a long climb in its middle, and the profile shows it before you are standing at its foot. Seeing the climbs early lets you plan rest stops, check daylight, and decide whether the route fits the group. The World Map Distance Explorer can measure the same route on a map first if the distance is still unknown.
Compare Routes Side By Side
Two routes to the same place can differ hugely in climbing even when their distances match. Drawing both profiles and comparing the total ascent, the highest point, and the shape of the climbs shows which route is kinder and which one is the challenge.
Check A Recorded Track After The Day
After a walk or a ride, the profile shows what the day really held: where the hard climb was, how high the route reached, and how much descent the knees absorbed. That record suits training logs, trip reports, and planning the next outing, and the PNG download keeps it as a picture.
What Can You Do With Route Elevation Profile Viewer?
This viewer fits any job where the shape of the ground matters as much as the distance. These are the jobs it handles best, from race planning to classroom geography.
Plan Hikes And Rides With Climbing In Mind
Load a planned route and read the total ascent and the steepest sections before you pack. A route with 800 metres of climbing needs more time, water, and food than a flat route of the same length, and the profile shows where the climbing falls so the day can be paced. The GPS Distance Calculator can check the gap between any two points on the same route.
Brief A Race Or A Group Walk
Share the PNG chart in a race briefing or a group message so every participant sees the climbs before the start. A picture of the profile is clearer than a paragraph of numbers, and it answers the question every participant asks first: where is the hard part.
Study Terrain For Geography Lessons
Draw the profile of a river valley, a mountain pass, or a coastal path, and the shape of the land becomes a chart students can read and discuss. The highest and lowest points give the relief of the route, and the total ascent shows how much the ground rises and falls along the way. The Bearing Calculator can add the compass direction of each leg when the lesson also covers navigation.
Quality And Settings
The viewer reads GPX tracks, routes, and waypoints, and it plots elevation against cumulative distance with the highest point, the lowest point, total ascent, total descent, and total distance shown beside the chart. Hovering over the chart reads the exact elevation and distance at any point, and both the chart and the data can be downloaded.
- GPX input with elevation read from the file, no API needed.
- Coordinate list input with heights from the free Open-Elevation tier.
- Total ascent, total descent, highest and lowest points, and distance.
- Hover any chart point to read its exact elevation and distance.
- PNG download of the chart and CSV download of the points.
There are no other settings to learn, because the route, the chart, and the downloads are the whole tool. Load a track, read the profile, and take the picture or the data. If the track holds too many points for a smooth chart, the GeoJSON to CSV Converter can help move the data into a table for a closer look at the numbers.
How Route Elevation Profile Viewer Works
A GPX file is an XML document, and the tool reads it in your browser with the built in parser, pulling the latitude, longitude, and elevation from every track point. It adds up the distance between each pair of neighbouring points to build the horizontal axis, and it plots each point’s elevation on the vertical axis, so the chart is a true trace of the recorded route from start to finish.
Total ascent is the sum of every rise between neighbouring points, and total descent is the sum of every fall, so small ups and downs along the way all count toward the totals. The highest and lowest points are simply the greatest and smallest elevations in the file. For coordinate lists, the tool sends the points to Open-Elevation in batches, which returns the ground height for each one from SRTM data on a 250 metre grid, and the same chart is then drawn from those heights.
All GPX work happens in your browser, and the file is never uploaded to a server. Only coordinate mode makes a network request, to the elevation service, and only with the coordinates themselves. If that service is down or its monthly quota of 500 coordinates per visitor IP is used, the tool shows an exact error saying so, and GPX mode keeps working without any change.
Privacy
Everything you view stays in your browser. The Route Elevation Profile Viewer runs on your own computer, and nothing you do is uploaded to a server, stored, or shared with anyone. The tool does its job and shows the answer, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears the track from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Route Elevation Profile Viewer work smoother, whether this is your first route or your five hundredth.
- Use a GPX file with elevation when you have one.
- Check the file holds elevation before trusting a flat chart.
- Hover the chart to find where the steep climb starts.
- Save the PNG before you clear the track.
- Keep coordinate lists short to stay inside the free quota.
When the chart matches the ground you know, the totals are ready to plan with. If the profile looks noisy, with tiny ups and downs everywhere, the GPS heights are jittery, and the broad shape of the chart still tells the true story of the route. If the heights are easier to judge in feet, the Unit Converter changes metres at once.
More Tools For The Same Job
These tools handle the same kinds of jobs: GPS tracks, routes, distances, and measuring the ground.
- World Map Distance Explorer: measures the distance between places on a world map.
- GPS Distance Calculator: finds the distance between two sets of coordinates.
- Bearing Calculator: finds the compass direction from one point to another.
- GPS Elevation Gain Calculator: totals the climbing along a GPS track.
- GPX Track Simplifier: thins a GPS track down to fewer points.
- GPX to CSV Converter: turns a GPS track into a spreadsheet table.
- CSV to GPX Converter: turns a table of points into a GPS track.
- GeoJSON to CSV Converter: turns map data into a spreadsheet table.
- DMS to Decimal Degrees Converter: changes map coordinates into decimal form.
- Decimal Degrees to DMS Converter: changes decimal coordinates into degrees minutes seconds.
FAQ
Common questions about route elevation profiles, answered plainly.
Is Route Elevation Profile Viewer By TechnSols Free?
Yes, Route Elevation Profile Viewer by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can view as many routes as you like, and GPX files are read in your browser, so nothing is uploaded or stored anywhere.
Does GPX Mode Need The Internet Or An API?
No, GPX mode needs no API at all, because the elevation is already stored in every track point of the file. The file is read in your browser with no network request, so the profile works fully offline once the page has loaded, with no key and no quota.
What Are The Limits Of Coordinate Mode?
Coordinate mode uses the free Open-Elevation tier, limited to 500 coordinates per month per visitor IP, with SRTM data on a 250 metre grid and coverage from 60 North to 56 South. If the service is down or the quota is used, the tool shows an exact error, and GPX mode still works.
What Do Total Ascent And Descent Mean?
Total ascent is the sum of every rise along the route, and total descent is the sum of every fall, so all the small ups and downs count. The two figures together describe how much climbing the route really holds, which a single highest point alone cannot show.
What Files Can I Download?
You can download the profile chart as a PNG image for sharing in a trip report or a race briefing, and a CSV file listing every elevation point with its distance along the route. Both files are built in your browser, and neither one is sent to a server.
Load the route, read the climbs, and download the chart if the group needs to see it. A profile that matches the ground gives a plan you can trust, and that is the whole point of viewing it this way.