What Is Webhook Payload Viewer?
Webhook Payload Viewer is a free online tool by TechnSols that inspects a webhook payload you paste in and shows it as a readable view. You paste the headers and the JSON body, press Inspect, and the tool shows a pretty printed body, a header table, and a short event summary: the event type, the object it concerns, and the key values inside it. There is nothing to install and no account to make, so a first inspection takes seconds.
Webhooks are how services tell your app that something happened: a payment succeeded, a subscription changed, an order shipped. Stripe sends them as POST requests with a JSON body and a signature header, and the Stripe Webhooks Guide guide lists every event type a Stripe webhook can carry. When that body arrives as one long line, the JSON Formatter tool formats it with indentation, so nested objects and arrays are easy to scan instead of one long line.
The honest limit is that this tool does not receive webhooks. A browser cannot listen for incoming HTTP requests, so there is no public URL here for a provider to call. You paste a payload you already captured, from a log, a test run, or a provider dashboard, and the viewer inspects it. Before you trust a body, the JSON Validator tool checks that it is valid JSON.
How To Use Webhook Payload Viewer?
Here is how to inspect a webhook payload online in three quick steps. Using Webhook Payload Viewer is simple. There is no software to install and no account to make. Paste the payload, press Inspect, and read the view. When a header looks odd, the HTTP Header Checker tool reads each header the sender included and explains it.
Step 1: Paste The Headers
Copy the headers from the delivery log or the provider dashboard and paste them into the headers box, one per line as Name and value. The important ones are Content-Type, the provider signature header such as Stripe-Signature, and any delivery id. Headers with a secret value should be redacted before you paste them into a shared screen.
Step 2: Paste The JSON Body
Paste the full JSON body into the body box. The viewer accepts the raw body exactly as it arrived, including nested objects and arrays. If the body is not JSON, for example form encoded data, the viewer says so and shows the raw text instead of guessing. A body that was truncated in the log will fail the check, so paste the complete body.
Step 3: Inspect The Event Summary
Press Inspect and read the summary first: event type, object id, and the key values such as amount, currency, and status. Then open the pretty printed body to check the nested data, and the header table to check the signature header and the delivery id. Copy the formatted body or download it when you need to keep it.
The whole job takes a minute. A payload that fails the check is still useful: the error names the line where the JSON breaks, so fix that one spot and inspect again.
Why Webhook Payload Viewer?
A webhook that misbehaves is hard to debug from a log line. The body is one long string, the headers are buried, and the event type is somewhere in the middle. This viewer lays all three out in order, so the answer to what did they send is visible at once. When the payload suggests a replay, the REST API Playground tool sends the same body to an endpoint as a test request.
The Event Type Comes First
Every webhook body carries an event type, such as payment_intent.succeeded, and that one value decides what your code should do. The viewer pulls it to the top of the summary, so you never hunt through nested data to learn what happened. A wrong event type in a handler is a common bug, and seeing it first makes it easy to spot.
Headers And Body Stay Together
A payload without its headers is half the story: the signature header proves who sent it, and the delivery id ties it to the provider log. The viewer shows the header table beside the body, so a missing signature or a repeated delivery id is visible without switching tabs. That pairing is what turns a paste into an inspection.
Nothing Leaves Your Browser
Webhook bodies often carry customer emails, amounts, and ids, so sending them to a server to inspect would be a privacy risk. This viewer runs entirely in your browser: the paste never leaves your device, nothing is uploaded, and closing the tab clears it. Sensitive payloads stay sensitive.
What Can You Do With Webhook Payload Viewer?
Webhooks arrive from payments, code hosts, shops, and forms, so the viewer fits any job where a pasted payload needs a careful read. These are the jobs it handles best.
Debug A Failed Payment Webhook
When a payment webhook fails, paste the delivery from the provider log and read the event type, the object id, and the status. A succeeded event with a failed handler points at your code; a missing event points at the provider settings. The JSON Schema Validator tool checks the body against the shape your handler expects.
Compare A Retry With The Original
Providers retry a webhook when the first delivery fails, and the retry should match the original. Paste both bodies, one after the other, and compare the event ids and the values. A different id means a new event, not a retry, and that distinction decides whether your code should run twice.
Check A Payload Before You Code Against It
Before you write a handler, paste a sample payload from the docs and study its real shape: which fields are always present, which are nested, and which can be null. The API Collection Manager tool saves the test request you build from that payload, so the handler test starts from a known good body.
Quality And Settings
The inspection shows the event summary, the header table with a count, and the pretty printed body with two-space indentation, in that order. JSON bodies get a field count and a depth note; non-JSON bodies are shown as raw text with a clear label. The Base64 Encoder Decoder tool decodes a base64 field inside a body when a payload carries one.
- Summary: event type, object id, and key values such as amount, currency, and status.
- Headers: a table of every pasted header, with a count and the signature header flagged.
- Body: pretty printed JSON with a field count, or raw text when the body is not JSON.
- Samples: a real Stripe style payment_intent.succeeded payload and a GitHub style push payload.
- Limits: pasted payloads only; the tool cannot receive webhooks and cannot verify a signature without the secret.
There are no settings beyond the headers and the body, because the paste is the whole tool. Inspect honestly, read the summary first, and check the headers before you trust the body.
How Webhook Payload Viewer Works
The viewer reads your paste in two parts. It splits the headers into name and value pairs and shows them as a table, then it parses the body as JSON and prints it with indentation. It then scans the parsed body for the event type, the object id, and the key values, and builds the summary from what it finds. The Regex Tester tool finds a value inside a long body when you need one field fast.
Two limits are worth knowing. First, the viewer cannot receive a webhook, because a browser cannot listen for incoming HTTP requests; the GitHub Webhooks Guide guide explains how providers deliver webhooks to a real URL instead. Second, it cannot verify a signature, because that needs the secret only you and the provider hold; it can only show that the signature header is present. Never paste a live secret into a shared screen.
Privacy
Everything you type stays in your browser. The work is done on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. Closing the tab clears the form, so the details never leave your device.
Because no account is needed, there is no name, email, or history tied to what you check. Closing the tab ends the session, and the browser clears the input from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Webhook Payload Viewer work smoother, whether you are debugging one delivery or a whole integration.
- Paste the complete body: a truncated body fails the check and hides the real problem.
- Read the event type first, then the status, then the nested data.
- Check the delivery id in the headers before you act on a payload twice.
- Redact secrets in headers before you paste a payload into a shared screen.
- Keep the formatted body as a file, so the next handler test starts from a real example.
When a payload is understood, keep the formatted copy somewhere safe, so the next handler starts from a real example. If the payload carries a token to read, the JWT Decoder tool decodes its claims without sending it anywhere.
More Tools For The Same Job
These tools handle the same kinds of jobs: testing, reading, and organising the APIs a project needs.
- JSON Formatter: formats the JSON body of a webhook so it is easy to read.
- JSON Validator: checks that a webhook body is valid JSON before you trust it.
- JSON Schema Validator: checks a webhook body against the schema it should match.
- HTTP Header Checker: reads the headers a webhook sender includes.
- REST API Playground: replays a webhook body to an endpoint as a test request.
- API Collection Manager: saves the requests you build from a webhook payload.
- Base64 Encoder Decoder: decodes a base64 field inside a webhook body.
- Regex Tester: finds a value inside a long webhook body with a pattern.
- JWT Decoder: reads the claims inside a token a webhook carries.
- JSON to CSV Converter: turns a list of webhook events into a spreadsheet.
FAQ
Common questions about Webhook Payload Viewer, answered plainly.
Is Webhook Payload Viewer by TechnSols Free?
Yes, Webhook Payload Viewer by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can inspect as many payloads as you like, and everything you paste stays in your browser, so nothing is uploaded or stored anywhere.
Can This Tool Receive My Webhooks?
No, a browser cannot listen for incoming HTTP requests, so this tool has no public URL for a provider to call. Paste a payload you already captured from a log, a test run, or a provider dashboard, and the viewer inspects it. A receiving endpoint needs a server, which this tool does not provide.
What Is A Stripe Style Payload?
A Stripe style payload is a JSON body with an id, a type such as payment_intent.succeeded, a created time, and a data object holding the payment details. The viewer reads that shape and lifts the type, the object id, and the key values into the summary, so the important parts are visible at once.
Can It Verify A Webhook Signature?
No, verifying a signature needs the secret that only you and the provider hold, and the viewer never asks for it. It shows whether the signature header is present and what it contains, but it cannot say the signature is valid. Verify signatures in your own server code, where the secret stays private.
What If The Body Is Not JSON?
The viewer says so plainly and shows the raw text instead of guessing. Some webhooks send form encoded data, which is not JSON and cannot be pretty printed. Copy the raw text from there, or convert it first, and check the Content-Type header to see what format the sender used.
Paste the payload, read the summary, and check the headers before you trust the body. A careful read now saves a long debug later, and a clear error is worth more than a silent guess.