What Is Box Net Template Generator?
Box Net Template Generator is a free online tool by TechnSols that draws a foldable box net from four simple numbers: the box length, width, height, and glue flap. It lays out the six faces of the box in a cross pattern, adds one glue flap, marks the fold lines with dashed red lines, and exports the net as a true size SVG and as a PNG, so you can print it, cut it, and fold it into a real box.
A box net is the flat shape a box is cut from, and getting it right by hand means drawing six rectangles that share edges in the right places, which is easy to get wrong. This generator does the layout for you: a box 100 mm long, 60 mm wide, and 40 mm high, with a 10 mm glue flap, lays flat at 350.00 by 180.00 mm. Each face is labelled, so you can see at a glance which panel is the front, the top, or the back. If you already have a dieline file and only want to check it, the Packaging Dieline Previewer previews an uploaded dieline as a flat layout.
Everything runs in your browser, and no file is uploaded anywhere. You type the box size, press Generate Box Net, and the tool draws the net at once, with both downloads ready on the same page.
How To Use Box Net Template Generator?
Using Box Net Template Generator takes about a minute, with no software to install and no account to make. Type the box size, generate the net, and download the SVG or the PNG.
Step 1: Enter The Box Length, Width, And Height
Type the length, width, and height of the finished box in millimetres, using the inside size when the box must hold a product of a known size, or the outside size when the box must fit a shelf or a shipping carton. The defaults are 100 mm long, 60 mm wide, and 40 mm high, which is a small retail carton. Keep every number between 1 and 1000 mm. If the box must hold items of known size, the Shipping Box Calculator picks a box that fits them.
Step 2: Set The Glue Flap And Generate The Net
Set the glue flap width, which is the strip past the back face that glues to the opposite side, with 10 mm as a good starting point for a small carton. Press Generate Box Net to draw the net: the top face sits above the front, the left, front, right, and back faces sit in a row, the bottom face sits below the front, and the glue flap sits past the back face. The preview shows the net on the page, with solid black cut lines, dashed red fold lines, and a label on every face.
Step 3: Download The SVG And The PNG
Download the SVG for a design program or a cutting machine, because it is a vector file drawn at true size in millimetres, with the faces, the fold lines, and the labels as separate shapes. Download the PNG for a quick print or a visual check, because it is the same net rendered as a picture at twice the size. With 2 outputs, Download all files saves both at once. Print the PNG at 100 percent, or Actual size, so the net prints at the true millimetre size.
The whole job is three steps, and you can change one number and generate a new net. When the finished box needs a label, the Barcode Label Sheet arranges barcodes on a printable sheet.
Why Do Box Nets Need A Generator?
A box net looks simple until you draw one by hand, because every shared edge must match exactly: the front and the back must be the same size, the top and the bottom must be the same size, and the side faces must match the height. One rectangle drawn a few millimetres out makes a box that will not close.
Six Faces Must Share Their Edges
A closed box has six faces, and each face shares an edge with its neighbours, so the length of one edge fixes the length of the next. Drawing the net by hand means carrying those shared lengths across the whole drawing, and a single slip breaks the fold. The generator works out every shared edge from the three box numbers, so the net always folds to the box you asked for.
Fold Lines Decide Where The Box Bends
A net is more than six rectangles: the fold lines say where the board bends, and a fold in the wrong place makes a lopsided box. The generator marks every fold with a dashed red line, so the cutter and the folder can see at a glance which lines are cuts and which lines are folds. That split is what turns a flat drawing into a box that closes squarely.
A Glue Flap Holds The Box Together
The four side faces form a tube, and the tube needs a glue flap to hold it shut. Without a flap, the tube springs open, and with a flap that is too narrow, the glue has too little surface to hold. A 10 mm flap suits a small carton, and a larger box needs a wider flap, which is why the flap is a setting you can change instead of a fixed number. If the sheets need tiling across pages, the Poster Tiling Printer splits a large image across printable pages.
What Can You Do With Box Net Template Generator?
Box Net Template Generator fits any job where a flat sheet must become a box. These are the jobs it handles best, from a first mockup to a print-ready template.
Make A Mockup Box From Card
Print the PNG, cut along the solid lines, score along the dashed lines, and fold the net into a real box. A card mockup shows whether the product fits and whether the proportions look good on a shelf, before any board is ordered or any print run is planned.
Build A Print Template For A Carton
Download the SVG and open it in a design program to place the artwork on the faces, keeping text and logos inside the face edges. The SVG is drawn at true size in millimetres, so the artwork lands at the right size, and the fold lines stay separate, so the printer can tell cuts from folds. The CMYK Ink Coverage tool estimates how much ink the printed faces will use.
Check A Box Size Before Ordering Board
The results table shows the flat net size and the flat net area, so you can check whether the net fits the board or the sheet you have. A 100 by 60 by 40 mm box with a 10 mm flap lays flat at 350.00 by 180.00 mm, which fits an A3 sheet, while a larger box may need a bigger sheet or a different net layout.
Every job that starts with a box size ends with a net that folds, and this tool draws the net in the browser. A matching set of cards can be laid out with the Business Card Arranger tool.
Quality And Settings
Five settings shape the box net, and each one is simple to set.
- Box length: 1 to 1000 mm, the longest side of the box, default 100 mm.
- Box width: 1 to 1000 mm, the shorter side of the top face, default 60 mm.
- Box height: 1 to 1000 mm, the height of the side faces, default 40 mm.
- Glue flap: 0 to 100 mm, the strip past the back face, default 10 mm.
- Outputs: true size SVG plus a PNG rendered from the same SVG at twice the size.
The net uses a 10 mm margin around the whole drawing, so the flat size is the faces plus 20 mm in each direction. The fold lines are dashed red, the cut lines are solid black, and every face carries its name. When the box also needs a bleed area, the Bleed Area Calculator works out the bleed size from the trim size and the bleed margin.
How Box Net Template Generator Draws The Net
The generator lays the faces out in a cross. The top face, length by width, sits above the front face. The left, front, right, and back faces sit in a row below it: left is width by height, front is length by height, right is width by height, and back is length by height. The bottom face sits below the front, and the glue flap sits past the back face. With length 100, width 60, height 40, and flap 10, the flat width is 2 times 100 plus 2 times 60 plus 10 plus 20, which is 350.00 mm, and the flat height is 2 times 60 plus 40 plus 20, which is 180.00 mm. The Print Imposition Planner plans how such sheets are laid out for print.
Two honest limits are worth knowing. First, this generator draws one cross net only, with a single glue flap and no tuck flaps, so a tuck end carton, a mailer box, or a crash lock bottom needs a fuller dieline tool with those flaps built in. Second, the net uses the numbers you type as exact sizes, with no allowance for board thickness, so a thick board box will come out slightly smaller inside than the numbers say. If the box needs a spine or a booklet to go with it, the Spine Width Calculator works out the spine width from the page count and paper thickness.
Privacy
Everything you type stays in your browser. Box Net Template Generator runs on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. The tool draws the net locally, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears the numbers from memory. Your box sizes and packaging plans stay yours, and nothing about them is kept, shared, or sold.
Tips
A few habits make Box Net Template Generator work smoother.
- Fold a paper mockup first, before cutting board or ordering a print run.
- Score the fold lines with a blunt tool so the board bends cleanly.
- Print at 100 percent, or Actual size, and measure the printed net before cutting.
- Keep the artwork inside the face edges, clear of the fold lines.
- Save the SVG with the product file, as a record of the box size.
When the mockup folds squarely, the product fits, and the printed net measures true, the box is ready.
More Tools For The Same Job
These tools handle the same kinds of jobs: packaging, boxes, print sizes, and sheets.
- Bottle Label Size Calculator: works out label width from bottle diameter and height.
- Die-Cut Shape Designer: designs die-cut shapes with bleed and cut lines.
- Carton Volume Calculator: works out carton volume and how many cartons fit a pallet.
- Packaging Dieline Previewer: previews a dieline as a flat packaging layout.
- Bleed Area Calculator: works out bleed size and area from trim size and bleed margin.
- Print Imposition Planner: plans page imposition for print jobs, including booklets.
- Poster Tiling Printer: splits a poster image across printable pages with cut marks.
- Shipping Box Size Calculator: picks the smallest box that fits the items inside.
- Business Card Sheet Arranger: arranges cards on a printable sheet with cut guides.
- Spine Width Calculator: works out book spine width from page count and paper thickness.
FAQ
Common questions about box nets and this generator, answered plainly.
Is Box Net Template Generator By TechnSols Free?
Yes, Box Net Template Generator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can generate as many box nets as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Is A Box Net?
A box net is the flat shape a box is cut from, made of six faces joined along shared edges, plus a glue flap. Folded along the dashed lines, it becomes a closed box. A dieline is the same idea with print marks added, as the Dieline Generator guide explains.
What Size Is The Default Box Net?
The default box is 100 mm long, 60 mm wide, and 40 mm high, with a 10 mm glue flap. Its net lays flat at 350.00 by 180.00 mm, with a flat area of 630.00 square centimetres and a box volume of 240.00 cubic centimetres. Change any number and the net redraws at once.
Can I Use The SVG With A Cutting Machine?
Yes, the SVG is a vector file drawn at true size in millimetres, with solid cut lines and dashed fold lines, so cutting software can read the outlines directly. Set the dashed fold lines to score instead of cut in your cutting software, as the Packaging Dieline guide explains.
Does The Net Allow For Board Thickness?
No, the net uses the numbers you type as exact sizes, with no allowance for board thickness. For thin card the difference is tiny, but for thick corrugated board, add the board thickness to the inside size first, so the finished box comes out at the size you want.
Type the box size, generate the net, and fold a paper mockup first. A net that folds squarely here folds squarely in board, and that is the whole point of the generator.