TechnSols
Advertisement

Carton Volume Calculator

Work out carton volume online free with Carton Volume Calculator. CBM per carton, cartons per pallet and per container, no install or sign-up needed.

Be the first to rate this tool

Enter the carton size, then press Calculate Volume.

What Is Carton Volume Calculator?

Carton Volume Calculator is a free online tool by TechnSols that works out the volume of a carton and how many cartons fit on a pallet and in a shipping container. Enter the carton length, width, and height in centimetres, and the tool reports the volume of one carton in CBM, which is cubic metres, and in cubic feet, plus the cartons per pallet layer, per pallet, and per container.

Advertisement

CBM is the unit freight is priced and planned in. One CBM is a cube one metre on each side, and a carton of 40 by 30 by 25 centimetres is 0.03 CBM, since 40 times 30 times 25 is 30000 cubic centimetres, and one million cubic centimetres make one cubic metre. The same carton is 1.06 cubic feet. The Volume Converter tool converts between volume units when a supplier quotes in a different unit.

The counts are a geometric fit, which means the tool works out how many whole cartons tile into the space. It tries both turns of the carton on a pallet and all six turns in a container, and it keeps the best fit. Real loads fill less than the geometric count, because cartons leave gaps and the container door limits the last row, so treat the count as a planning number and confirm it with the forwarder before you book. Most cartons also carry a barcode, and the Barcode Generator tool makes a new code when the carton needs one.

How To Use Carton Volume Calculator?

Using Carton Volume Calculator takes about a minute. Enter the carton size, the quantity, the pallet size and height, the maximum stack height, and the container type, then press Calculate Volume. The default carton is 40 by 30 by 25 centimetres on a 120 by 100 centimetre pallet with a 15 centimetre pallet height and a 180 centimetre stack height, in a 20ft container.

The result lists the volume per carton, the total volume, the cartons per pallet layer, the pallet layers, the cartons per pallet, and the cartons per container with the container fill as a percentage. Press Download to save a text report with every number. If the report must go to someone as a PDF, the Image To PDF tool turns a text or image file into a PDF in the browser.

Read The Result

Read the result from the carton outward. The volume per carton is the freight unit. The cartons per layer and the layers give the cartons per pallet. The cartons per container and the fill percentage show how much of the container the load uses. When the fill is near 100 percent, the load is tight and the real count will be lower, so leave room for gaps.

Why Carton Counts Go Wrong On A Shipment?

Three problems cause most failures.

Volume Decides The Freight Bill

Sea freight for a shared container is charged on the larger of volume and weight. A shipper who guesses the volume under-quotes the job, and the forwarder corrects the bill later. Working out the real CBM before the quote keeps the price honest and the margin intact.

Pallets Fill Up Faster Than Expected

A pallet looks big until the cartons go on it. The carton footprint rarely divides evenly into the pallet, so a strip of pallet stays empty on every layer, and the stack height limit cuts off the last layer. The Shipping Box Calculator tool shows the same problem from the box side, since a box that is a little too big wastes the whole pallet. Counting the layers before loading stops the surprise.

Containers Never Fill To The Roof

A container holds less than its rated volume, because cartons never tile perfectly, the door opening is smaller than the inside, and the payload weight limit can govern before the space runs out. A 20ft container is rated near 33 CBM, but a real load is usually 25 to 28 CBM. The fill percentage in the result shows this honestly, so a plan that says 79.7 percent full is a realistic plan, not a failed one. The carton itself comes from a flat net, and the Packaging Dieline Previewer tool checks an uploaded die line before the cartons are cut.

What Can You Do With Carton Volume Calculator?

Three jobs cover most uses.

Price A Shipment Before Booking

Work out the total CBM for the quantity, then ask the forwarder for a price on that volume. The quote matches the load, the client sees the same numbers you do, and nobody is surprised by a corrected bill after shipping. Save the text report with the quote.

Plan A Pallet Load For The Warehouse

Check the cartons per layer and the layers before the cartons arrive, so the warehouse knows how many pallets to expect. A 40 by 30 by 25 centimetre carton gives 9 cartons per layer and 6 layers on a 120 by 100 pallet, which is 54 cartons per pallet. The SKU Generator tool helps when a product needs a code on each carton before it is stacked.

Check A Container Load Before Ordering

Work out how many cartons fit in a 20ft or 40ft container before you place the order, so the order fills the container without needing a second container for a few cartons. The same carton gives 882 cartons in a 20ft container and 1890 in a 40ft container, so the choice between one 40ft and two 20ft loads is a number, not a guess.

Quality And Settings

The settings are the real sizes, and the result is only as good as the measurements. Measure the outside of the carton, including any bulge, strapping, or handles, since the outside is what takes up space. Measure the pallet the same way, since the base eats into the stack height.

Choose The Right Settings

These settings shape the result.

  • Measure the outer carton dimensions, not the product inside, since freight charges the space the carton takes up.
  • Round each dimension up to the next whole centimetre, since a carton that is a little bigger than measured still has to fit.
  • Keep the carton height vertical on the pallet, since the tool counts pallet layers with the height upright.
  • Use the true maximum stack height for your warehouse, since a taller stack than the rack allows is not a real plan.
  • Check the container type, since a 20ft, a 40ft, and a 40ft high cube hold very different counts.

The container sizes in the tool are typical internal sizes: a 20ft container is 589 by 235 by 239 centimetres with 33.2 CBM inside, a 40ft is 1203 by 235 by 239 centimetres with 67.7 CBM inside, and a 40ft high cube is 1203 by 235 by 269 centimetres with 76.0 CBM inside. Other lines and builders differ slightly, so check the exact container when the load is tight. A standard EUR pallet is 120 by 80 centimetres, as the Pallet page shows.

Advertisement

How Carton Volume Calculator Counts Cartons

The volume is length times width times height, with the answer divided by one million when the dimensions are in centimetres. A 40 by 30 by 25 centimetre carton is 30000 cubic centimetres, which is 0.03 CBM, and 0.03 times 35.3147 is 1.06 cubic feet. The total volume is the volume per carton times the quantity, so 100 cartons of that size are 3.00 CBM. Retail cartons usually carry an EAN-13 code, and the EAN-13 Generator tool makes one with the right check digit.

The pallet count tries both turns of the carton footprint and keeps the better one: 3 by 3 cartons per layer beats 4 by 2, so the layer is 9 cartons. The layers are the stack height minus the pallet height, divided by the carton height and rounded down: 165 divided by 25 is 6 layers, so the pallet holds 54 cartons. The Intermodal Container page gives the background on container sizes and why internal dimensions differ between lines.

What The Numbers Mean

CBM per carton is the freight unit for one carton. Cartons per layer and layers give cartons per pallet. Cartons per container is the best geometric fit in the chosen container, and the fill percentage is that count times the carton volume divided by the container capacity. A fill of 79.7 percent for 882 cartons in a 20ft container is a good, realistic load, not a waste of space.

Privacy

Your carton sizes never leave your device. The numbers are read in your browser and the counts are worked out there, and nothing is uploaded to any server. The sizes are not stored, shared, or sent to anyone, and closing the page removes them from memory.

The text report is made in your browser too, and it downloads straight to your device. No account is needed, no email is asked for, and no tracking is added to the file. You can plan a client shipment with the same privacy as your own stock.

Tips

A few habits keep the plan honest. The geometric count is the best case, so always leave room for the real world: gaps between cartons, a door that is smaller than the inside, and a weight limit that can govern first. Scan the carton barcode on arrival with the Barcode Reader tool to confirm the goods match the booking before they are stacked.

  • Plan for 80 percent fill, not 100 percent, since a real load rarely reaches the rated volume.
  • Check the weight limit as well as the space, since a heavy load can hit the limit first.
  • Keep cartons upright on the pallet when the contents need it, since turning cartons for a better fit can damage the goods.
  • Count pallets, not just cartons, since the warehouse books pallet positions.
  • Keep the report with the booking, so the forwarder, the warehouse, and the client all use the same numbers.

If the count is just short of a full container, check whether a slightly smaller carton or a different turn fills the gap. The Bundle Price Calculator tool covers the pricing side of the same job, since a bundle price changes when the carton count changes.

More Tools For The Same Job

The tools below cover the rest of a packaging and shipping job, from sizing a label to checking a barcode. Each one solves one part of the same problem, and all of them run free in the browser.

FAQ

These are the questions people ask most about carton volume. Each answer is short, and the tool itself is free to use as often as you need it.

How Do I Work Out CBM For One Carton?

Multiply the length, width, and height in metres, or multiply them in centimetres and divide by one million. A carton of 40 by 30 by 25 centimetres is 30000 cubic centimetres, which is 0.03 CBM. The tool does this for you, and it also gives the volume in cubic feet, which is 1.06 for the same carton.

How Many Cartons Fit On One Pallet?

It depends on the carton footprint, the pallet size, and the stack height. A 40 by 30 by 25 centimetre carton gives 9 cartons per layer on a 120 by 100 centimetre pallet, with 6 layers under a 180 centimetre stack height, which is 54 cartons per pallet. Change any size in the tool to see your own count.

How Many Cartons Fit In A 20ft Container?

A 40 by 30 by 25 carton gives 882 cartons in a 20ft container, which is 79.7 percent of the 33.2 CBM inside. The same carton gives 1890 in a 40ft container. The tool tries all six turns of the carton and keeps the best fit, so the count is the best fit, not the first turn tried.

Why Is The Container Fill Below 100 Percent?

Cartons are whole boxes, so they never tile a container perfectly, and the door opening and the payload weight limit cut the real load further. A 20ft container is rated near 33 CBM, but a real load is usually 25 to 28 CBM. A fill near 80 percent is a good, realistic load, and the tool shows it honestly.

Is Carton Volume Calculator By TechnSols Free?

Yes, Carton Volume Calculator by TechnSols is free to use online, with no install and no sign-up. You can work out as many carton sizes as you need, download the text report for each one, and use the default carton to learn the tool. Nothing is uploaded, and nothing is charged.

Freight is priced on volume, pallets are planned in layers, and containers are booked by the fit. Work out the numbers before you book, keep the report with the job, and the shipment will cost what you quoted.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement