What Is Breadboard Circuit Simulator?
Breadboard Circuit Simulator is a free online tool by TechnSols that lets you build a small circuit on a virtual breadboard, place a battery, a resistor, and an LED, and see whether the LED lights. It works out the current from your values with Ohms law, so a wrong resistor shows itself before any real part is touched.
A breadboard looks simple and hides its rules: rows of holes are joined in ways you cannot see, and a part in the wrong row is a circuit that does not work. The Wikipedia page on breadboards explains the layout, and this simulator puts the parts on that layout for you, so the rows and the rails are visible while you build.
This simulator is different from the live Ohms Law calculator tool, which finds voltage, current, or resistance from the other two. That tool solves the formula; this one places the parts on a board and shows what the whole circuit does, so the two answer different questions about the same circuit.
People use it to learn how a breadboard works, to test an LED circuit before buying parts, to check a resistor value, or to teach a class the loop from battery to LED. It suits a student, a beginner, a teacher, or anyone who wants to practise breadboarding without parts.
How To Use Breadboard Circuit Simulator?
Here is how to simulate a breadboard circuit online in three quick steps. Using Breadboard Circuit Simulator is simple. There is no software to install and no account to make. Place the parts, set the values, and run it. If a resistor value must be checked from its bands, the Resistor Color Code tool reads the colour code for you.
Step 1: Place The Battery, Resistor, And LED
Place a battery on the board, then a resistor, then an LED, using the place buttons. Each part appears on the board in its own row, and the board shows the power rails at the top and bottom, so the loop from the battery through the parts is easy to follow.
Step 2: Set The Supply Voltage And Resistor
Set the supply voltage, usually 5 or 9 volts, and the resistor value in ohms. The LED forward voltage is set too, usually about 2 volts for a red LED. The resistor is the part that limits the current, so its value decides whether the LED lights, stays dim, or burns.
Step 3: Run The Simulation And Read The Result
Press Run Simulation to see the current, the power in the resistor, and the LED state: on, dim, or burnt. A current between 5 and 20 milliamps lights the LED, below 5 it stays dim, and above 30 it burns. Press Download Result to save the numbers as a text file. If the resistor must be checked from its colour bands, the Series Resistance calculator tool reads those bands for you.
The whole test takes a few minutes, because the board is built from clicks, not from parts. A circuit you have seen light up on screen is a circuit you can build on a real board, and that is the whole point of simulating it here.
Why Breadboard Circuit Simulator?
A simulator beats a first real build because a first real build can burn a part in seconds. Test the values here and the LED that would have burnt stays safe in its packet. If the resistor value also needs reading from its bands, the Parallel Resistance calculator tool reads the colour code for you.
The reason a breadboard matters is that it is how nearly every beginner circuit starts: no soldering, parts that pull out and move, and a board that can be reused. The SparkFun tutorial page on breadboards shows the same point from the other side: the board joins rows of holes so parts connect without solder.
The Board Layout Is Visible
A real breadboard hides its connections under plastic, and a beginner cannot see which holes are joined. This board draws the rails and the rows on screen, so the loop from battery to resistor to LED is a line you can follow with your eyes, and a part in the wrong row is obvious.
The Current Is Worked Out For You
Ohms law is one short formula, and it is easy to apply to the wrong voltage. The simulator takes the supply minus the LED forward voltage, divides by the resistor, and shows the current in milliamps, so the number on screen is the number the real circuit would carry.
Mistakes Cost A Click, Not A Part
A resistor too small burns an LED, and a burnt LED is a part in the bin. Here the LED burns on screen and the part stays safe, so the lesson is learned for free. If the resistor must be double-checked from its bands, the Electrical Power calculator tool reads those bands for you.
What Can You Do With Breadboard Circuit Simulator?
A breadboard simulator fits any job where a small circuit must be tried first. These are the jobs this simulator handles best.
Learn How A Breadboard Works
A breadboard is confusing until you have used one, because the holes that look separate are joined underneath. Place parts here, run the simulation, and move a part to another row to see the circuit fail, and the hidden rules of the board become rules you have seen, not rules you have only read. If a resistor value must be read from its bands, the Voltage Drop calculator tool reads the colour code for you.
Test An LED Circuit Before Buying Parts
An LED circuit needs one resistor of the right value, and buying the wrong value wastes a trip to the shop. Test the supply, the LED voltage, and a few resistor values here, and the value that lights the LED at a safe current is the value to buy.
Teach A Class The Loop From Battery To LED
A class can watch a circuit light up on one shared screen, and the teacher can change the resistor live to show the LED dim and brighten. The current and the LED state sit beside the board, so the cause and the effect are visible together in one place.
Quality And Settings
The simulator places a battery, a resistor, and an LED on a board with power rails, takes a supply from 1 to 24 volts and a resistor from 1 to 100000 ohms, and works out current, resistor power, and LED state from Ohms law. The result downloads as a text file. If a resistor value must be read from its bands, the Capacitance calculator tool reads the colour code for you.
- Battery, resistor, and LED placed on a virtual board.
- Supply voltage from 1 to 24 volts, resistor to 100000 ohms.
- Current worked out from Ohms law in milliamps.
- LED state shown as on, dim, or burnt.
- Download the result as a plain text file.
There are no other settings to learn, because the simulation is the whole tool. Open the page, set the values, and read the result.
How Breadboard Circuit Simulator Works
When you press Run Simulation, the simulator takes the supply voltage, subtracts the LED forward voltage, and divides the rest by the resistor value, which is Ohms law for the current in the loop. It then checks the current: below 5 milliamps the LED is dim, from 5 to 20 it is on, and above 30 it is burnt, with a warning in between. If the resistor must be checked from its colour bands, the Battery Runtime calculator tool reads those bands for you.
Two limits are worth knowing. The simulator models ideal components: it uses one fixed forward voltage for the LED and ignores wire resistance, temperature, and battery drain, so it cannot match a real circuit to the last decimal. It also simulates logic levels and simple DC values only, not analogue behaviour or real voltages across every part.
Privacy
Everything you build stays in your browser. The parts, the values, and the result are worked out on your own computer, and nothing you build is uploaded to a server, stored, or shared with anyone. The simulator reads your circuit and shows the answer, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you build. Closing the tab ends the session, and the browser clears the circuit from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make Breadboard Circuit Simulator work smoother, whether this is your first board or your fiftieth.
- Start with 5 volts and a 330 ohm resistor for a red LED.
- Raise the resistor if the LED burns, lower it if it stays dim.
- Keep the loop in mind: battery, resistor, LED, back to battery.
- Check the LED forward voltage before you trust the current.
- Download the result to keep beside your parts list.
When the LED lights at a safe current, the board is ready to build for real. If the resistor must be read from its bands, the Binary To Decimal tool reads the colour code for you.
More Tools For The Same Job
These tools handle the same kinds of jobs: electrical values, resistors, and the maths around them.
- Ohms Law Calculator: finds voltage, current, or resistance from the other two.
- Resistor Color Code Calculator: reads a resistor value from its colour bands.
- Series Resistance Calculator: adds resistors wired in a series chain.
- Parallel Resistance Calculator: works out resistors wired side by side.
- Electrical Power Calculator: finds the power a circuit uses from voltage and current.
- Voltage Drop Calculator: works out the voltage lost along a wire or resistor.
- Capacitance Calculator: works out capacitance from charge and voltage.
- Battery Runtime Calculator: works out how long a battery lasts under a load.
- Binary To Decimal: turns a binary number into the decimal value it stands for.
- Scientific Calculator: works out the maths behind a circuit calculation.
FAQ
Common questions about simulating breadboard circuits, answered plainly.
Is Breadboard Circuit Simulator by TechnSols Free?
Yes, Breadboard Circuit Simulator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can build as many board circuits as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Parts Can I Place On The Board?
You can place a battery, a resistor, and an LED on the virtual board, with the power rails drawn at the top and bottom. The simulation covers that classic loop, which is the first circuit most beginners build on a real breadboard.
What Current Lights The LED?
A current from 5 to 20 milliamps lights the LED at a safe brightness. Below 5 milliamps the LED stays dim, and above 30 milliamps the simulator marks it burnt, so the safe window is easy to read from the result.
Does It Model A Real Breadboard Exactly?
No, it is a simplified model with ideal components, one fixed LED forward voltage, and no wire resistance or battery drain. It teaches the layout and the current calculation, not the last-decimal behaviour of a physical board in the real world.
Can I Save The Result?
Yes, press Download Result to save the supply, resistor, current, power, and LED state as a plain text file. The file keeps the numbers beside your parts list, so the real build starts from values you have already tested before you buy.
Place the parts, set the values, and run the simulation. A board you have seen work on screen is a board you can build with confidence, and that is the whole point of simulating it here.