TechnSols
Advertisement

CNC Cutting Time Estimator

Estimate CNC cutting time free online with CNC Cutting Time Estimator. Cutting, rapid, plunge and tool change time, no install or sign-up needed.

Be the first to rate this tool

Enter the cutting and rapid lengths, feed rates, plunge settings and tool changes, then press Estimate Cutting Time.

What Is CNC Cutting Time Estimator?

CNC Cutting Time Estimator is a free online tool by TechnSols that estimates how long a CNC job will take from the toolpath length and the feed rates. A quote, a delivery date or a day of machine scheduling all depend on the same question, how many minutes the machine will be busy, and this tool answers it from the cutting length, the rapid length, the plunge settings and the tool changes.

Advertisement

A CNC job is not one single move. The tool cuts material at the cutting feed, moves between cuts at the rapid feed, plunges into the material at the plunge rate, and stops for every tool change. The tool shows each part separately, so the biggest time cost is visible at once.

Everything runs in your browser, and no file is uploaded anywhere. The estimator works in millimetres and millimetres per minute, which is the unit most CNC shops use, and the result is shown in minutes and seconds with a share for each operation, so a quote can be built from the breakdown instead of a single guessed number. For a 3D print time check instead, the Print Time Estimator estimates a print, while the Unit Converter changes inches or feet into millimetres first.

How To Use CNC Cutting Time Estimator?

Using CNC Cutting Time Estimator takes less than a minute, with no software to install and no account to make. Enter the lengths, the feed rates, the plunge settings and the tool changes, then press Estimate Cutting Time. The worked example below uses a cutting length of 1200 mm, a rapid length of 800 mm, a cutting feed of 600 mm per minute, a rapid feed of 3000 mm per minute, 4 plunges of 6 mm at 150 mm per minute, and 2 tool changes at 45 seconds each.

Step 1: Enter The Cutting And Rapid Lengths

Type the cutting length in millimetres into the first box and the rapid length into the second box. The cutting length is the total distance the tool travels while cutting, and the rapid length is the total distance it travels while moving between cuts without cutting. For the worked example, enter 1200 for the cutting length and 800 for the rapid length. If the job spans a long period, the Time Duration Calculator works out the span between two times.

Step 2: Enter The Feed Rates And Plunge Settings

Type the cutting feed and the rapid feed in millimetres per minute into the next two boxes, then type the plunge depth, the number of plunges and the plunge rate. The plunge depth is how far the tool plunges each time, and the plunge rate is how fast it moves down. For the worked example, enter 600 for the cutting feed, 3000 for the rapid feed, 6 for the plunge depth, 4 for the plunges and 150 for the plunge rate.

Step 3: Add Tool Changes And Read The Breakdown

Type the number of tool changes and the time per change in seconds into the last two boxes, then press Estimate Cutting Time. The table shows cutting, rapid, plunge and tool change time with a share for each, and the status line gives the total. For the worked example, cutting takes 120.0 seconds, rapid takes 16.0 seconds, plunging takes 9.6 seconds, tool changes take 90.0 seconds, and the total is 235.6 seconds, which is 3 minutes 55.6 seconds. Download the TXT summary to keep the breakdown with the quote.

Why Do Machinists Need A CNC Cutting Time Estimator?

A CNC machine is paid for by the hour, so every quote and every schedule needs a time number that can be defended, and a guess is not a defence. An estimator that breaks the job into cutting, rapid, plunge and tool change time shows where the minutes go, which is exactly what a shop needs before promising a price or a date.

Quotes Need A Defensible Number

A quote built on a guessed time either loses money when the job runs long or loses the order when the price is too high. For quick maths on the shop floor, the Scientific Calculator handles the arithmetic behind the estimate.

Tool Changes Often Cost The Most

On a short job, the tool changes can cost more time than the cutting itself, and that surprises people who only count the cutting length. In the worked example, 2 tool changes at 45 seconds each cost 90 seconds, while the cutting costs 120 seconds, so the changes are nearly half the job. Seeing that share in the table is what prompts a better plan, such as fewer tools or a faster changer. When a torque figure also needs checking, the Torque Calculator works it out from force and distance.

Scheduling Needs The Whole Job

A machine schedule that counts only cutting time will overbook the machine, because rapid moves, plunges and tool changes still occupy it. The estimator adds all four parts, so the scheduled time matches the time the machine is actually busy, and the next job starts when the last one really finishes.

What Can You Do With CNC Cutting Time Estimator?

CNC Cutting Time Estimator fits any job where a CNC machine cuts, moves, plunges and changes tools. These are the jobs it handles best, from a single prototype to a batch quote.

Quote A Single Part

A customer asks for one milled bracket, and the CAM program reports a cutting length of 1200 mm and a rapid length of 800 mm. Enter those lengths with the feeds from the tool table, add the plunges and the tool changes, and the total of 3 minutes 55.6 seconds is the machine time to price, before setup and handling are added on top.

Compare Two Feed Rates

Raising the cutting feed from 600 to 900 mm per minute cuts the cutting time from 120 seconds to 80 seconds, and the estimator shows that saving at once, alongside the unchanged rapid, plunge and tool change times. That comparison is worth doing before the faster feed is tried on the machine, because the saving is clear and the risk can be judged. When the toolpath itself needs converting first, the SVG To DXF tool changes an SVG drawing into DXF for CAM.

Plan A Day Of Machine Time

A shop with ten jobs to run can estimate each one, add the totals, and see whether the day fits in the available machine hours. Jobs that run long can be moved, split, or quoted with a later date, instead of the schedule slipping hour by hour while work waits.

Quality And Settings

Nine settings shape the time estimate, and each one is simple to set.

Advertisement
  • Cutting length: 0 to 1000000 mm, the total distance cut at feed.
  • Rapid length: 0 to 1000000 mm, the total distance moved without cutting.
  • Cutting feed: over 0 and up to 100000 mm per minute.
  • Rapid feed: over 0 and up to 100000 mm per minute.
  • Plunge settings: depth 0 to 1000 mm, 0 to 10000 plunges, rate over 0 and up to 100000 mm per minute.
  • Tool changes: 0 to 1000 changes, each 0 to 3600 seconds.
  • Outputs: a per-operation breakdown table and a TXT summary.

The limits keep the inputs inside real machine ranges, and a feed of 0 is refused, because dividing by 0 has no answer. Times are shown in minutes and seconds to one decimal place, which is finer than most shop scheduling needs. When a length needs converting before it is entered, the Length Converter changes it between millimetres, centimetres, metres and inches.

How CNC Cutting Time Estimator Works Out The Total

The estimator works operation by operation. Cutting time is the cutting length divided by the cutting feed, rapid time is the rapid length divided by the rapid feed, plunge time is the number of plunges times the plunge depth divided by the plunge rate, and tool change time is the number of changes times the time per change. For the worked example, cutting is 1200 divided by 600, which is 2 minutes or 120.0 seconds, rapid is 800 divided by 3000, which is 0.27 minutes or 16.0 seconds, plunging is 4 times 6 divided by 150, which is 0.16 minutes or 9.6 seconds, and tool changes are 2 times 45, which is 90.0 seconds. The total is 120.0 plus 16.0 plus 9.6 plus 90.0, which is 235.6 seconds, or 3 minutes 55.6 seconds.

Two honest limits are worth knowing. First, this is a constant feed planning estimate, so it does not model acceleration, deceleration, controller look ahead, or machine dynamics, and a real machine takes longer on short moves and corners than the simple division suggests. Second, the estimate covers machine time only, so setup, loading, unloading, inspection and handling must be added separately before a quote is final, and the result should always be checked against a CAM simulation and a first run. If a drawing needs converting first, the DXF To SVG tool changes a DXF file into SVG for viewing, and the Dimension Viewer shows the dimensions of an STL model.

Privacy

Everything you enter stays in your browser. CNC Cutting Time Estimator runs on your own computer, and nothing you type is uploaded to a server, stored, or shared with anyone. The tool reads the lengths, feed rates, plunge settings and tool changes, works out the time, and that is all it does.

Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears the numbers from memory. Your job details and quotes stay yours, and nothing about them is kept, shared, or sold.

Tips

A few habits make CNC Cutting Time Estimator work smoother.

  • Take the cutting and rapid lengths from the CAM program, not from a guess.
  • Use the feed rates from the tool table for the real material and tool.
  • Count every plunge, since drilling and pocket entry add up fast.
  • Time one real tool change, and use that number instead of a catalogue figure.
  • Save the TXT summary with the quote, so the breakdown can be checked later.

More Tools For The Same Job

These tools handle the same kinds of jobs: CAD drawings, CNC work, dimensions and units.

FAQ

Common questions about CNC time and this estimator, answered plainly.

Is CNC Cutting Time Estimator By TechnSols Free?

Yes, CNC Cutting Time Estimator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can estimate as many jobs as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

How Is CNC Cutting Time Worked Out?

Cutting time is the cutting length divided by the cutting feed, rapid time is the rapid length divided by the rapid feed, plunge time is the plunges times the plunge depth divided by the plunge rate, and tool change time is the changes times the time per change.

Why Is The Estimate Different From The Real Run?

The estimate assumes a constant feed, while a real machine accelerates, decelerates, and slows for corners, so short moves take longer than the simple division suggests. Setup, loading, unloading and inspection are also outside the estimate. Check the result against a CAM simulation and a first run before quoting.

What Feed Rate Should I Enter?

Enter the feed rate from the tool table for the real material, tool and spindle speed, since that is the rate the machine will actually run. A feed rate that is too high gives a time that is too short, and a feed rate that is too low gives a time that is too long.

Where Can I Read More About CNC Machining?

Computer numerical control uses programmed instructions to move a cutting tool along a toolpath, with feed rates setting how fast the tool travels. The Numerical Control guide explains how CNC machines work, and the Feed Rate guide explains how feed rate affects cutting time and finish.

Enter the lengths, feed rates, plunge settings and tool changes, then check the breakdown and the total.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement