TechnSols
Advertisement

Digital Circuit Simulator

Build and simulate digital logic circuits free online. Add gates, wire them, run the simulation, and download the circuit, no install and no sign-up.

Be the first to rate this tool

Add gates, wire them, and press Run Simulation.


					

What Is Digital Circuit Simulator?

Digital Circuit Simulator is a free online tool by TechnSols that lets you build a small digital circuit from logic gates, set its inputs, and watch the output change. Add gates, wire each gate to the inputs or to another gate, and run the simulation to see every signal in the circuit at once.

Advertisement

A circuit drawn on paper cannot run, so a mistake in it only shows up after the parts are bought and wired. The Wikipedia page on digital electronics explains the same idea from the theory side: a circuit is gates wired together, and the output is decided by the gates and the inputs together. This simulator lets you run that idea before you build it.

This simulator is different from the live Binary To Decimal tool, which converts a whole binary number into decimal. That tool works on numbers; this one works on a circuit of gates and wires, so the two answer different questions about the same binary world.

People use it to test a combination before a lab build, to see how a half adder works, to check a Boolean expression as a circuit, or to teach how gates combine. It suits a student, a hobbyist, a teacher, or anyone who wants to see a circuit run instead of only drawing it.

How To Use Digital Circuit Simulator?

Here is how to simulate a digital circuit online in three quick steps. Using Digital Circuit Simulator is simple. There is no software to install and no account to make. Add gates, wire them, and run it. If a result must be read as a number, the Decimal To Hex tool converts that binary value into decimal.

Step 1: Add Gates To The Circuit

Choose a gate type, AND, OR, NOT, XOR, NAND, or NOR, and press Add Gate. Each gate appears in the list with its own number, so a circuit of three gates is three numbered rows you can read in order. Add the gates first, then wire them.

Step 2: Wire Each Gate To Its Inputs

For each gate, pick where its inputs come from: the circuit inputs A, B, and C, or the output of an earlier gate. Wiring a gate to an earlier gate is how a circuit grows, because the second gate then works on the first gate’s answer instead of on a raw input.

Step 3: Set The Inputs And Run The Simulation

Set inputs A, B, and C to 0 or 1, pick the gate whose output is the circuit output, and press Run Simulation. The page shows every gate output and the final output, so a wrong answer can be traced back to the gate that made it. Press Download Circuit to save the circuit as a JSON file. If the final output must be written as a number, the Hex To Binary tool turns that binary result into a decimal value.

The whole test takes a few minutes, because the circuit is built from clicks, not from parts. A circuit you can run is a circuit you can trust, and that is the whole point of simulating it here.

Why Digital Circuit Simulator?

A simulator beats a sketch because a sketch cannot disagree with you. Run a circuit here and a wrong wire shows itself at once, in the gate output that does not match the rule. If the values also need scaling, the Scientific Calculator tool converts the units around them.

The reason circuits matter is that gates alone are only the alphabet: the circuit is the sentence. The AAC textbook page on digital electronics shows the same point from the other side: combinational circuits combine gates to compute, and the same gates in different wiring give different answers.

Gates Combine Into Real Circuits

One gate can only do one small job, but gates wired together can add, compare, and decide. This simulator wires gates in order, so a half adder is two gates and a full adder is a few more, and the jump from gate to circuit is a few clicks, not a new subject.

Every Gate Output Is Visible

A circuit that only shows the final output hides where it went wrong, and a wrong final answer with no trail is a dead end. This simulator shows every gate output beside the final one, so the gate that broke the rule is the gate you fix, and the rest of the circuit stays untouched.

The Circuit Saves As A File

A circuit built in a browser tab is lost when the tab closes, unless it is saved. Press Download Circuit and the gates, wires, and inputs save as a JSON file, so the circuit can be rebuilt, shared, or kept beside lab notes. If the result must be checked as a number, the Ohms Law calculator tool converts the binary output into decimal for you.

What Can You Do With Digital Circuit Simulator?

A digital circuit simulator fits any job where gates must work together. These are the jobs this simulator handles best.

Test A Combination Before A Lab Build

A lab build costs chips, wires, and time, and a wrong combination wastes all three. Build the same gates here first, run every input combination, and only wire the real circuit when the simulation gives the answers the design needs. If a binary answer must be written as a decimal number, the Series Resistance calculator tool converts it for you.

See How A Half Adder Works

A half adder is the smallest useful circuit: an XOR gate gives the sum and an AND gate gives the carry. Build it here, flip A and B through all four combinations, and the two outputs show the addition table of one-bit numbers, which is the first step toward a full adder.

Check A Boolean Expression As A Circuit

A Boolean expression is a circuit written in symbols, and the symbols are easy to misread. Build the expression as gates, run the inputs, and the outputs prove whether the expression says what you meant, before the expression is written into notes or code.

Advertisement

Quality And Settings

The simulator supports six gate types with up to three circuit inputs, gates wired to inputs or to earlier gates, and a chosen output gate. The simulation shows every gate output and the final output, and the circuit downloads as JSON. If a value must be read in another unit, the Parallel Resistance calculator tool converts the units around it.

  • Six gate types: AND, OR, NOT, XOR, NAND, and NOR.
  • Three circuit inputs, A, B, and C, each 0 or 1.
  • Gates wire to inputs or to earlier gate outputs.
  • Every gate output is shown beside the final output.
  • Download the whole circuit as a JSON file.

There are no other settings to learn, because the simulation is the whole tool. Open the page, set the values, and read the result.

How Digital Circuit Simulator Works

When you press Run Simulation, the simulator evaluates the gates in the order they were added, so each gate reads inputs that are already known: a raw input, or the output of a gate added earlier. It applies each gate rule, stores the result, and repeats until the chosen output gate is reached, then shows every gate output in order. If the final output must be written as a decimal number, the Electrical Power calculator tool converts that binary value into decimal.

Two limits are worth knowing. The simulator models ideal gates with logic levels only: it has no voltages, no timing, no delay, and no analogue behaviour, so it cannot show glitches or race conditions. It also evaluates gates in add order, so a gate wired to a later gate is refused, because a circuit with a loop needs a clock and memory to make sense.

Privacy

Everything you build stays in your browser. The gates, the wires, and the inputs are worked out on your own computer, and nothing you build is uploaded to a server, stored, or shared with anyone. The simulator reads your circuit and shows the answer, and that is all it does.

Because no account is needed, there is no name, email, or history tied to what you build. Closing the tab ends the session, and the browser clears the circuit from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.

Tips

A few habits make Digital Circuit Simulator work smoother, whether this is your first circuit or your fiftieth.

  • Add all gates before you wire any of them.
  • Wire each gate to an earlier gate, never to a later one.
  • Run all eight input combinations for a three-input circuit.
  • Read the gate outputs in order when the final answer is wrong.
  • Download the circuit before you close the tab.

When every gate output reads true, the circuit is ready to build. If the result must be written as a number, the Unit Converter tool turns that binary output into decimal for you.

More Tools For The Same Job

These tools handle the same kinds of jobs: binary numbers, electrical values, and the maths around them.

FAQ

Common questions about simulating digital circuits, answered plainly.

Is Digital Circuit Simulator by TechnSols Free?

Yes, Digital Circuit Simulator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can build and run as many circuits as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

How Many Gates Can A Circuit Hold?

You can add up to 12 gates to one circuit, which is enough for adders, comparators, and small combinational designs. Each gate wires to the circuit inputs or to an earlier gate, and the simulation shows every gate output in order.

Does It Simulate Real Voltages?

No, it simulates logic levels only, with ideal gates and no voltages, delay, or analogue behaviour. It shows what a circuit should do by its logic, not how a real chip behaves when it is slow, hot, or unpowered in the real world.

Can I Save My Circuit?

Yes, press Download Circuit to save the gates, wires, and inputs as a JSON file. The file keeps the whole circuit, so it can be kept beside lab notes, shared with a classmate, or rebuilt later whenever you need it again.

Why Is A Gate Wired To A Later Gate Refused?

A gate that reads a later gate creates a loop, and a loop with no clock has no single answer. The simulator evaluates gates in add order, so each gate must read an input or an earlier gate, which keeps every circuit decidable.

Add the gates, wire them in order, and run the simulation. A circuit you have seen run is a circuit you can build with confidence, and that is the whole point of simulating it here.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement