What Is Inductor Value Calculator?
Inductor Value Calculator is a free online tool by TechnSols that works out inductance from a core and its turns, works out the turns for a target inductance, and decodes the code printed on an inductor. With an AL value of 100 nH per turn squared and 10 turns it returns 10 µH, and a code of 101 reads as 100 µH.
An inductor wound on a core gets its inductance from two things: the core itself and the number of turns of wire around it. The core is summed up in a single number, the AL value, which is the inductance that one turn would give on that core, measured in nanohenries per turn squared. Because inductance grows with the square of the turns, doubling the turns gives four times the inductance. A printed code such as 471 reads in microhenries: the first two digits are the figures and the third is the zeros, so 471 is 470 µH. When the circuit also has resistors to check, the Resistor Color Code tool reads their bands the same way.
All three modes give the answer in all three units at once, plus the nearest standard E12 value. The turns mode also shows the exact turns and the inductance the whole number of turns gives. Everything runs in the browser and nothing is uploaded.
How To Use Inductor Value Calculator?
Using Inductor Value Calculator takes less than a minute, with no software to install and no account to make. Pick the mode, type the numbers, and read the answer.
Step 1: Pick A Mode And Enter The Known Values
Choose Inductance from AL and turns when the core and the winding are known, Turns from inductance and AL when a target inductance has to be wound, or Decode an inductor code when only the marking on the part is known. Type the AL value in nanohenries per turn squared from the core datasheet, the number of turns, or the code exactly as printed. If the target came from a circuit calculation, the Ohms Law tool checks the voltage and current figures behind it.
Step 2: Read The Inductance Or The Turns
Press Calculate Inductance, Calculate Turns or Decode Code and read the result. The inductance mode shows the value in all three units with the nearest standard E12 value. The turns mode shows the exact turns, the whole number of turns to wind, and the inductance those whole turns actually give,.
Step 3: Download The Result Summary
Press Download on the result row to save a short text summary with the inputs, the result in all three units and the nearest standard value. Keep the file with the winding notes for the next build.
Why Use Inductor Value Calculator?
Inductance is easy to get wrong by a large factor, because the square law punishes a small mistake in the turn count and the AL value varies widely between cores. The calculator keeps the arithmetic straight.
Turns Count Twice Over
Inductance grows with the square of the turns, so 10 turns give one hundred times the AL value and 20 turns give four hundred times it. The calculator shows exactly what each turn count gives.
Every Core Has Its Own AL Value
The AL value bundles the core material, its size and its magnetic path into one number, and it changes completely from one core to the next. An iron powder core may have an AL value of a few nanohenries per turn squared, while a ferrite core of the same size may have thousands. Take the AL value from the datasheet for the exact core in hand. For background on the part itself, the inductor basics page explains how an inductor stores energy in its magnetic field.
A Code Is Not A Rating
A printed code gives only the nominal inductance, and it says nothing about the current the part can carry, the current at which it saturates, or its DC resistance. A 10 µH part can be rated from a few milliamps to several amps, so the wrong rating will fail in use. Check the current rating, saturation current and resistance in the datasheet before fitting the part. When the supply feeding the inductor also needs checking, the Voltage Drop tool works out what the load actually sees.
What Can You Do With Inductor Value Calculator?
The calculator fits three jobs that come up again and again: winding a coil, choosing a stocked inductor, and reading a part that is already on a board.
Wind A Coil To A Target Inductance
Pick the core, read its AL value from the datasheet, and type the target inductance into the turns mode. The tool gives the exact turns, the whole number to wind, and the inductance those whole turns actually give. A target of 1,000 µH on a core with an AL value of 2,350 nH per turn squared needs 20.63 turns, so wind 21 turns for 1.036 mH. For a switching circuit built around the coil, the Transistor Switching simulator shows the switch that will drive it.
Check The Inductance Of A Winding
Count the turns already on a core, type the AL value from the datasheet, and read the inductance the winding should have.
Identify A Stocked Inductor By Its Code
A power inductor on a board is usually marked with a three digit code, and the code mode reads it in seconds. A part marked 101 is 100 µH, a part marked 471 is 470 µH, and a part marked 4R7 is 4.7 µH, where the R stands for the decimal point. Reading 100 as one hundred microhenries is the classic mistake, since 100 means 10 µH. For a circuit that counts or sequences with the inductor, the Flip Flop simulator covers the logic side of the same board.
Quality And Settings
The calculator has no quality setting to tune, because the result follows directly from the numbers that are typed. The settings that matter are the mode, the unit of the target inductance, and the AL value itself, and all three are chosen before the calculation runs. The AL value is always entered in nanohenries per turn squared, which is the unit datasheets use, and the target inductance can be entered in nanohenries, microhenries or millihenries. The turns mode rounds the exact answer to the nearest whole turn and shows the inductance that whole number gives.
- Inductance mode takes an AL value from 0.1 to 100,000 nH per turn squared and a whole number of turns from 1 to 10,000.
- Turns mode takes a target inductance in nH, µH or mH and returns the exact turns, the turns to wind and the inductance at that turn count.
- Code mode reads 3-digit codes in µH, R decimal codes in µH, N decimal codes in nH, and tolerance letters F, G, J, K and M.
- Every result shows nanohenries, microhenries and millihenries together, plus the nearest standard E12 value.
- The AL value is never guessed by the tool.
When an input is refused, the error message names the problem and gives an example that works. Four digit codes are refused, because makers read them in different units and guessing would risk a thousandfold error.
How Inductor Value Calculator Works?
The inductance mode uses the formula L equals AL times N squared, with AL in nanohenries per turn squared and N the number of turns. With an AL value of 100 and 10 turns, the result is 10,000 nH, which is 10 µH. The turns mode turns the same formula around: N equals the square root of L divided by AL, with L converted to nanohenries first. A target of 10 µH is 10,000 nH, and dividing by an AL value of 100 gives 100, whose square root is 10 turns exactly.
The code mode reads a three digit code in microhenries: the first two digits are the significant figures and the third digit is the number of zeros, so 101 is 10 followed by one zero, which is 100 µH, and 471 is 47 followed by one zero, which is 470 µH. R stands for the decimal point in microhenries, so 4R7 is 4.7 µH, while N stands for it in nanohenries, so 2N2 is 2.2 nH. The Arduino Pin State simulator is a useful next step for anyone driving a coil from a microcontroller, and the ferrite core guide page explains the core materials that set the AL value.
Privacy
Inductor Value Calculator runs entirely in the browser. The AL value that is typed, the turn count, the target inductance and the code that is entered never leave the device, and nothing is uploaded to a server or stored anywhere. There is no account and no tracking, and closing the page clears everything. When the same bench also needs a digital circuit checked, the Binary Counter simulator works the same way, with everything running locally and nothing sent away.
Because nothing is stored, there is also nothing to delete and nothing to export. The downloaded text file is the only record, and it lives wherever the browser saves downloads.
Tips
A few habits make inductor work much more reliable, and they cost nothing to adopt.
- Take the AL value from the datasheet for the exact core in hand, since two cores that look alike can have AL values thousands of times apart.
- Remember that ungapped ferrite is often held only to plus or minus 25 percent.
- Count the turns by passing through the hole, not by counting loops on the outside, since a turn that does not pass through the core does not count.
- Keep a short list of the codes used most often: 100 is 10 µH, 101 is 100 µH, 220 is 22 µH, 471 is 470 µH and 4R7 is 4.7 µH.
- Measure the finished winding with a meter at the frequency it will actually see, since ferrite reads differently at different frequencies.
When a small chip inductor has no marking at all, which is common on surface mount parts, the code cannot help and the part has to be identified from the reel label, the parts list or a meter. For a board level check after the part is fitted, the LED Circuit simulator shows a simple load working, and the Logic Gate simulator covers the digital side of a finished project.
More Tools For The Same Job
The tools below solve the jobs that sit next to inductor values on the same bench.
- Resistor Color Code Calculator: reads the colour bands on a resistor and gives its resistance and tolerance.
- Ohms Law Calculator: works out voltage, current, resistance or power from the other two values.
- Voltage Drop Calculator: works out how much voltage is lost along a wire or a supply rail.
- Transistor Switching Simulator: shows a transistor switching a load on and off.
- Flip Flop Simulator: builds and tests flip flop circuits that store one bit.
- Arduino Pin State Simulator: shows the state of Arduino pins for a sketch.
- Binary Counter Simulator: counts in binary and shows each output bit.
- LED Circuit Simulator: shows how an LED behaves with its resistor and supply voltage.
- Logic Gate Simulator: builds and tests digital logic from basic gates.
- 555 Timer Simulator: shows timing and output for the classic 555 timer chip.
FAQ
The questions below cover the points that come up most often when an inductor value is worked out for the first time.
What Does 101 Mean On An Inductor?
101 means 10 followed by one zero in microhenries, which is 100 µH. The first two digits are the significant figures and the third digit is the number of zeros, so the code is read in microhenries and then converted to 100,000 nH or 0.1 mH for other uses.
What Is The AL Value Of A Core?
The AL value is the inductance that one turn would give on that core, measured in nanohenries per turn squared. It bundles the core material, its size and its magnetic path into one number, and it comes from the core datasheet.
How Many Turns Do I Need For 100 UH?
Divide the target by the AL value and take the square root. On a core with an AL value of 100 nH per turn squared, 100 µH is 100,000 nH, and the square root of 1,000 is 31.62 turns, so wind 32 turns. Those 32 turns give 102.4 µH.
Does The Code Tell Me The Current Rating?
No, the code gives only the nominal inductance, and the current rating, the saturation current and the DC resistance are separate figures from the datasheet. A part with the right inductance but the wrong current rating will overheat or saturate in use, so always check those ratings before fitting the part.
Is Inductor Value Calculator By TechnSols Free?
Yes, Inductor Value Calculator by TechnSols is completely free to use online, with no sign up, no install and no limit on the number of calculations. It runs in the browser, nothing is uploaded, and the text summary downloads free too.
Inductor values stop being a puzzle once the square law and the code rule are known, and the calculator keeps both close at hand for every core and every part on the bench. Work out the turns, check the inductance, decode the code, and fit the part with confidence.