What Is LED Circuit Simulator?
LED Circuit Simulator is a free online tool by TechnSols that works out the resistor an LED circuit needs and shows how bright the LED will be. Enter the supply voltage, the LED forward voltage, and the current you want, and the tool gives the resistor value, the power it must handle, and a brightness preview.
An LED without a resistor burns, and an LED with the wrong resistor is dim or dead, so the resistor is the whole circuit in one part. The Wikipedia page on light-emitting diodes explains the same idea from the device side: an LED drops a fixed forward voltage and passes only the current the resistor allows. This simulator turns that fact into a number you can buy.
This simulator is different from the live Ohms Law calculator tool, which finds voltage, current, or resistance from the other two. That tool solves the formula; this one designs the LED circuit around it, with brightness and power beside the resistor value, so the two answer different questions about the same circuit.
People use it to pick a resistor for a first LED project, to check why an LED is dim, to size a resistor for a 12 volt supply, or to teach Ohms law with a part that lights up. It suits a student, a hobbyist, a maker, or anyone who wants an LED that lights safely.
How To Use LED Circuit Simulator?
Here is how to simulate an LED circuit online in three quick steps. Using LED Circuit Simulator is simple. There is no software to install and no account to make. Enter three numbers and read the resistor. If a resistor value must be checked from its bands, the Resistor Color Code tool reads the colour code for you.
Step 1: Enter The Supply And LED Voltages
Enter the supply voltage, such as 5, 9, or 12 volts, and the LED forward voltage, usually about 2 volts for red, 3 volts for white, and 2.1 volts for green. The supply must be higher than the LED voltage, or no current can flow at all.
Step 2: Choose The Current You Want
Choose the current in milliamps, usually 10 to 20 for a bright indicator LED. More current means a brighter LED and a smaller resistor, but also more heat in the resistor, so the choice is a balance between brightness and safety.
Step 3: Read The Resistor, Power, And Brightness
Read the resistor value in ohms, the nearest standard value you can actually buy, the power the resistor must handle, and the brightness preview. Press Download Result to save the numbers as a text file. If the resistor must be checked from its colour bands, the Electrical Power calculator tool reads those bands for you.
The whole calculation takes less than a minute, because it is one formula and three numbers. A resistor you can buy is a circuit you can build, and that is the whole point of simulating it here.
Why LED Circuit Simulator?
A calculator beats a guess because a guess burns LEDs. Work the resistor out here and the LED lights at the brightness you asked for, on the first try. If the resistor value also needs reading from its bands, the Voltage Drop calculator tool reads the colour code for you.
The reason the resistor matters is that an LED is not a bulb: it has almost no resistance of its own, so without a resistor the current runs away. The SparkFun tutorial page on light-emitting diodes shows the same point from the other side: the LED fixes its voltage, and the resistor fixes the current.
The Resistor Value Is Exact, Not Guessed
A resistor picked by feel is either too big, and the LED is dim, or too small, and the LED burns. The simulator divides the voltage across the resistor by the current you want, so the value on screen is the value the circuit needs, to the ohm.
The Nearest Standard Value Is Shown
Resistors are sold in standard values, and a calculated 325 ohms is not on any shelf. The simulator shows the nearest standard value beside the exact one, so the number on screen is a part you can actually buy, not a value that only exists in maths.
Power And Brightness Sit Beside The Resistor
A resistor that is right in ohms can still be wrong in watts, if it must shed more heat than its body allows. The simulator shows the power and the brightness preview with the resistor, so the whole circuit is judged at once. If the resistor must be double-checked from its bands, the Series Resistance calculator tool reads those bands for you.
What Can You Do With LED Circuit Simulator?
An LED circuit simulator fits any job where an LED must light safely. These are the jobs this simulator handles best.
Pick A Resistor For A First LED Project
A first LED project is usually one LED, one resistor, and a battery, and the only hard part is the resistor. Enter the supply and the LED voltage, pick 15 milliamps, and the resistor on screen is the part to buy, with the standard value beside it. If the resistor must be read from its bands, the Parallel Resistance calculator tool reads the colour code for you.
Find Out Why An LED Is Dim
An LED that glows faintly usually has a resistor that is too big, or a supply that is too low for its forward voltage. Enter the real values here and the current on screen shows the cause: a current under 5 milliamps is a dim LED, and the resistor that fixes it is on the same screen.
Size A Resistor For A 12 Volt Supply
A 12 volt supply is common in cars and in bench power, and it needs a much bigger resistor than a 5 volt supply for the same LED. Enter 12 volts and the LED voltage, and the simulator shows the resistor and the power it must handle, so a quarter watt part is not asked to shed a watt of heat.
Quality And Settings
The simulator takes a supply from 1 to 24 volts, an LED forward voltage from 1 to 5 volts, and a current from 1 to 100 milliamps, and returns the exact resistor, the nearest standard value, the resistor power, and a brightness preview. The result downloads as a text file. If a resistor value must be read from its bands, the Battery Runtime calculator tool reads the colour code for you.
- Supply voltage, LED voltage, and current as inputs.
- Exact resistor value in ohms, to the ohm.
- Nearest standard resistor value you can buy.
- Resistor power in watts, so the wattage is safe.
- Brightness preview from dim to full brightness.
There are no other settings to learn, because the simulation is the whole tool. Open the page, set the values, and read the result.
How LED Circuit Simulator Works
When you press Calculate, the simulator subtracts the LED forward voltage from the supply voltage, which leaves the voltage across the resistor, and divides that voltage by the current you want, which is Ohms law for the resistor value. It then multiplies the resistor voltage by the current for the power, and scales the brightness from the current against a 20 milliamp full brightness. If the resistor must be checked from its colour bands, the Capacitance calculator tool reads those bands for you.
Two limits are worth knowing. The simulator models ideal components: it uses one fixed forward voltage for the LED and ignores temperature, so a real LED shifts its voltage slightly as it warms. It also assumes a steady DC supply, so it cannot model a pulsing or dimmed LED, where brightness follows the average current instead.
Privacy
Everything you calculate stays in your browser. The voltages, the current, and the resistor are worked out on your own computer, and nothing you enter is uploaded to a server, stored, or shared with anyone. The simulator reads your numbers and shows the answer, and that is all it does.
Because no account is needed, there is no name, email, or history tied to what you calculate. Closing the tab ends the session, and the browser clears the numbers from memory. That is the same protection on every tool here: your work stays yours, and nothing about it is kept, shared, or sold.
Tips
A few habits make LED Circuit Simulator work smoother, whether this is your first LED or your fiftieth.
- Use 15 milliamps for a bright indicator LED.
- Pick the nearest standard resistor above the exact value.
- Check the resistor power before you buy a quarter watt part.
- Measure the real supply voltage if the LED looks dim.
- Download the result to keep beside your parts list.
When the resistor, the power, and the brightness all read safe, the LED is ready to wire. If the resistor must be read from its bands, the Scientific Calculator tool reads the colour code for you.
More Tools For The Same Job
These tools handle the same kinds of jobs: electrical values, resistors, and the maths around them.
- Ohms Law Calculator: finds voltage, current, or resistance from the other two.
- Resistor Color Code Calculator: reads a resistor value from its colour bands.
- Electrical Power Calculator: finds the power a circuit uses from voltage and current.
- Voltage Drop Calculator: works out the voltage lost along a wire or resistor.
- Series Resistance Calculator: adds resistors wired in a series chain.
- Parallel Resistance Calculator: works out resistors wired side by side.
- Battery Runtime Calculator: works out how long a battery lasts under a load.
- Capacitance Calculator: works out capacitance from charge and voltage.
- Scientific Calculator: works out the maths behind a circuit calculation.
- Binary To Decimal: turns a binary number into the decimal value it stands for.
FAQ
Common questions about simulating LED circuits, answered plainly.
Is LED Circuit Simulator by TechnSols Free?
Yes, LED Circuit Simulator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can size as many LED circuits as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.
What Resistor Does An LED Need?
It depends on the supply, the LED forward voltage, and the current you want. The simulator divides the voltage across the resistor by the current, so for a 5 volt supply, a 2 volt LED, and 15 milliamps, the resistor is 200 ohms.
What Is LED Forward Voltage?
Forward voltage is the voltage an LED drops when it conducts, usually about 2 volts for red, 2.1 for green, and 3 for white and blue. The supply must be higher than this voltage, or no current flows and the LED stays dark.
Why Is My LED Dim?
A dim LED usually means the current is too low, often below 5 milliamps, because the resistor is too big or the supply is too low. Enter your real values here and the current on screen shows the cause at once.
Can I Save The Result?
Yes, press Download Result to save the supply, LED voltage, current, resistor, standard value, and power as a plain text file. The file keeps the numbers beside your parts list, so the real build starts from values you have already tested before you buy.
Enter three numbers and read the resistor. An LED that lights at the brightness you asked for is a circuit that works, and that is the whole point of simulating it here.