TechnSols
Advertisement

XML Unescape Tool

XML Unescape Tool free online. Turn XML entities back into plain text in your browser, fast and free, no sign up, no install.

Be the first to rate this tool

Enter text to unescape.

What Is XML Unescape Tool?

XML Unescape Tool is a free online tool by TechnSols that turns XML entities back into the plain characters they stand for, so escaped text can be read, edited, or used again, with no install and no sign up. The entities are & < > ” and ‘, plus numeric entities like © and ©: they become & ” ‘ and the characters those numbers stand for. Text that was escaped to sit safely inside XML comes back as ordinary text. This free online tool does that unescaping in your browser, live as you type, with no install and no sign up. The tool works on any text: a single value, a whole description, or a block of copied content.

Advertisement

Unescaping is the reverse of escaping, and the two tools belong together: escape text to put it into XML, unescape it to take it back out again. The tool decodes in one pass, so &lt; becomes < and not <, which keeps double-escaped text safe. You can read more about the five predefined entities in the W3C Predefined Entities section of the specification, and about how entities work in the MDN Entity glossary.

People search for this tool in many ways: xml unescape tool, unescape xml, decode xml entities, xml unescape online, xml entity decoder, unescape xml online, convert entities to text, and xml decode. All of those mean the same job, and this page covers them all. Whether you are reading a feed, cleaning an export, or recovering text that was escaped twice, the unescape tool gives you the plain characters back.

How To Use XML Unescape Tool

Unescaping takes three quick steps. There is nothing to install, no account to make and no file to upload. You paste the text, read the plain result, and copy it straight away.

Step 1: Paste Your Text

Paste or type the escaped text into the first box: a product name with & in it, a description full of < and >, or a whole block of escaped XML. The tool decodes as you type, so the result is already there before you finish. An HTML Entity Decoder does the same job for text that comes out of an HTML page instead of an XML document.

Step 2: Read The Plain Result

The plain text appears live in the output box: every & becomes &, every < becomes <, every > becomes >, and the quotes become ” and ‘. Numeric entities like © become the character they stand for. The line under the output shows how many entities were decoded. An XML to JSON Converter helps when the plain text then needs to move into JSON.

Step 3: Copy Or Download The Result

Press Copy result to put the plain text on your clipboard, or Download to save it as unescaped.txt. Use it wherever the escaped form was in the way: an editor, a report, a message, or a search. An URL Encoder/Decoder handles the same recovery job for text that was encoded for a web address.

That is the whole job. No sign up, no download, no file leaving your browser.

Why Use XML Unescape Tool?

Escaped text is safe to store and hard to read. Unescaping gives you the characters back when the storing is done. The longer the text, the harder it is to scan for the value you actually need, and the more likely a search is to miss it.

Escaped Text Is Hard To Read

A description that reads Rock & Roll Lamp is correct XML and poor reading: the eye trips over every entity, and a long block of escaped text is nearly unreadable. Unescaping it once gives you Rock & Roll Lamp, which is what the writer meant and what the reader needs to see.

Searching Escaped Text Misses Matches

A search for Smith & Sons finds nothing in a file where the name is stored as Smith & Sons, because the stored text and the search text do not match. Unescaping the file first means the search works on the text as it was written, and every match is found.

Double Escaping Hides The Real Text

A value that was escaped twice shows as &amp; in the file, and unescaping it once gives &, which is still not the character &. A tool that decodes in one pass shows you exactly where you stand: run it once, read the result, and run it again only if the text still holds entities.

What Can You Do With XML Unescape Tool?

The unescape tool fits anywhere escaped text has to become readable again. These are the jobs it handles most often.

Read A Feed Without The Entities

You open an XML feed and every description is full of & and <, which makes the content hard to scan. Unescape the text you need and it reads as the writer wrote it. An HTML Entity Encoder does the opposite job when the plain text has to go back into a page.

Clean An Export For A Report

An export from a system stores every special character as an entity, and the report has to show the plain text. Unescaping the export once gives you clean values to paste into the report, with no entities left to confuse the reader. A Base64 Encoder/Decoder is the tool for the same cleanup when the export is encoded rather than escaped.

Recover Text That Was Escaped Twice

A value that went through two systems can arrive double-escaped, showing &lt; where it should show <. Unescape it once to get <, check the result, and unescape again only if entities remain. A JSON Validator checks the same kind of double handling when the data that came back twice-processed is JSON.

Quality And Settings

The tool decodes named entities, decimal numeric entities and hex numeric entities, in one pass. The list below is the whole rule.

Advertisement
  • Named entities: amp, lt, gt, quot and apos, plus common ones such as nbsp, copy, euro, pound and hellip.
  • Decimal numeric entities: © becomes the character with code 169.
  • Hex numeric entities: © becomes the same character, written in hex.
  • One pass: &lt; becomes < and not <, so double-escaped text stays safe and visible.
  • Unknown entities: left exactly as written, so a typo like &p; is never silently changed.

Entities outside the table, such as rare HTML names, stay unchanged rather than being guessed. If an entity survives unescaping, check its spelling: it may be a name this tool does not know.

How XML Unescape Tool Works

The unescape tool reads your text and looks for entity patterns: an ampersand, a name or a number, and a semicolon. Each pattern is replaced with the character it stands for, using a fixed table for the named entities and the character code for the numeric ones. The replacement runs in one pass over the text, which is the detail that matters: a single pass turns &lt; into <, while a second pass would turn it into <, which is a different result and usually the wrong one. That is the whole rule, and it fits in one sentence: find each entity, replace it with its character, and leave everything else alone.

The work happens entirely in your browser, on the text you typed, with no server and no library. The tool counts the entities it decoded and shows the count under the output, so you can see at a glance whether anything in your text needed decoding at all. Text with no entities comes out unchanged, which is the correct result for text that was already plain.

Privacy

Everything you paste into the XML Unescape Tool stays on your own device. The tool runs entirely in your browser, using the browser’s own XML parser, and nothing you type is uploaded to a server, saved in a database, or shared with anyone. There is no account, no sign up and no file to send anywhere, so the XML you work with never leaves your machine.

Because nothing is stored, closing the tab erases your input completely. If you are working with XML that holds private details, such as customer names, internal system names, or configuration values, you can use the tool with the same confidence as editing a file on your own computer. The result is yours to copy or download, and nothing about the job is kept after you leave.

Tips

A few habits make unescaping safer and the result easier to trust.

  • Unescape once, then look: if entities remain, the text was escaped twice, and only then should you run it again.
  • Check the count: if the tool says zero entities were decoded, your text was already plain and needs no further work.
  • Never unescape inside live XML: decoding the entities in a whole document turns its text into markup and breaks the file.
  • Watch for unknown entities: a name the tool does not know stays unchanged, so check the spelling before you assume it is plain text.
  • Use the Word Counter to check the size of the plain text, Find and Replace Text to clean up any leftover entities, and a Regex Tester to find any entity pattern that survived, before you paste the result into your report.

One pass at a time, and look at the result between passes. That is how double-escaped text gets fixed without breaking anything.

More Tools For The Same Job

Unescaping is one step in working with XML. These tools cover the jobs that usually come before and after it.

  • XML Escape Tool: turns plain text into safe entities when it has to go back into XML.
  • XML Formatter: lays out a document with clean indentation so the text is easy to find.
  • XML Minifier: shrinks a document to its smallest size after the unescaping is done.
  • XML XPath Tester: pulls single values out of a document with a query, to check the plain values.
  • XML to JSON Converter: turns the same XML into JSON when the next tool in the chain speaks JSON.
  • JSON Formatter: formats JSON the same way, with the same indent choices.
  • HTML Entity Decoder: decodes entities from HTML pages, where the same names need the same treatment.
  • URL Encoder/Decoder: decodes text that was encoded for a web address.
  • XML Difference Checker: compares two documents and lists every change between them.
  • XML Namespace Inspector: lists the namespaces in a document with their prefixes and URIs.

FAQ

The questions people ask most about unescaping XML, answered plainly.

Is XML Unescape Tool by TechnSols Free?

Yes, XML Unescape Tool by TechnSols is completely free to use. You can turn XML entities back into the plain characters they stand for as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Which Entities Does The Tool Decode?

The five XML entities amp, lt, gt, quot and apos, common named entities such as nbsp, copy, euro, pound and hellip, and numeric entities in decimal form like © and hex form like ©. Unknown entity names are left unchanged rather than guessed.

Why Do Some Entities Stay Unchanged?

Two reasons: the name is not in the tool’s table, or the entity is misspelled. A typo like &p; is not a real entity, so the tool leaves it exactly as written instead of guessing what you meant. Check the spelling and try again.

Does Unescaping Run More Than Once?

No, it runs in one pass on purpose. &lt; becomes < and not <, which keeps double-escaped text visible instead of silently turning it into markup. If entities remain after one run, run the tool again on the result, and only then.

Can I Unescape A Whole XML Document?

You can, but you should not: decoding the entities inside a whole document turns its text into markup and breaks the file. Unescape only the text values you have taken out of the document, and leave the document itself alone.

Escaped text is safe to store, plain text is safe to read. Unescape once, look at the result, and use the plain characters with confidence. That is all the tool does, and it is all the job needs.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement