TechnSols
Advertisement

Capacitor Code Calculator

Decode capacitor codes free online with Capacitor Code Calculator. Get pF, nF and µF values fast, no install or sign-up needed.

Be the first to rate this tool

Enter a capacitor code such as 104, then press Decode Code.

What Is Capacitor Code Calculator?

Capacitor Code Calculator is a free online tool by TechnSols that decodes the short code printed on a ceramic or film capacitor. Type a code such as 104 and the tool reads it as 100 nF, which is 100,000 pF or 0.1 µF. It works in reverse too, so a value such as 100 nF gives the code 104.

Advertisement

Small capacitors are too small to carry their full value in print, so makers stamp a three digit code on the body instead. The first two digits are the significant figures and the third digit is the number of zeros to add, with the answer always in picofarads. A code of 473 is 47,000 pF or 47 nF, and a letter after the digits, such as K in 473K, is the tolerance. When a part also needs its resistor value checked, the Resistor Color Code tool reads the bands on the resistor next to it.

Every result appears in all three units at once, because different circuits and datasheets use different units for the same part. The calculator also names the nearest standard E12 value. Everything runs in the browser and nothing is uploaded.

How To Use Capacitor Code Calculator?

Using Capacitor Code Calculator takes less than a minute, with no software to install and no account to make.

Step 1: Enter The Code Or The Value

Leave the mode on Decode a code and type the marking exactly as it is printed on the part, including any letter at the end, for example 104, 473K or 222J. To work in reverse, switch the mode to Find the code for a value, type the capacitance number, and pick picofarads, nanofarads or microfarads. If the value came from a circuit calculation, the Ohms Law tool checks the resistance and current figures behind it.

Step 2: Read The Value In Three Units

Press Decode Code or Find Code and read the result. A decoded code shows the capacitance in all three units, the tolerance when a letter was present, and the nearest standard E12 value. A reverse lookup shows the three digit code and says clearly when the code is the nearest one rather than an exact match.

Step 3: Download The Result Summary

Press Download on the result row to save a short text summary with the code, the value in all three units, the tolerance and the nearest standard value. Keep the file with the parts list for the next order.

Why Use Capacitor Code Calculator?

Capacitor codes look simple, and that is exactly why they are misread so often. A single digit in the wrong place changes the value by a factor of ten.

Small Parts Carry Short Codes

A ceramic disc capacitor has almost no room for print, so the maker stamps three digits and nothing else. The code is not a part number and it is not a voltage rating, it is only the capacitance in picofarads, counted as two significant digits and a multiplier. Reading 100 as one hundred microfarads is wrong by a factor of ten, since 100 means 10 pF.

One Value Has Three Common Units

The same capacitor is 100,000 pF on the bench, 100 nF on the schematic and 0.1 µF in the shop listing, and each unit is correct. Mixing the units up is easy when a parts list uses one unit and a tutorial uses another. The tool shows all three units side by side. For background on how a capacitor stores charge, the capacitor basics page explains the part itself.

A Wrong Reading Breaks The Circuit

A decoupling capacitor with the wrong value lets noise through to a chip, a timing capacitor with the wrong value changes the frequency of an oscillator, and a filter capacitor with the wrong value shifts the frequency a filter passes. None of these faults looks like a broken part, so the circuit misbehaves in ways that are hard to trace back to a single small component. When a supply rail also needs checking, the Voltage Drop tool works out what the load actually sees.

What Can You Do With Capacitor Code Calculator?

The calculator fits anywhere a small capacitor has to be identified, chosen or checked.

Identify A Part From A Parts Bin

A mixed bag of ceramic capacitors all look alike, and the only thing that tells them apart is the code. Type each code in turn and sort the parts by real value instead of by guesswork, then label the bag with the value in nanofarads so the next build goes faster. For a quick check of the circuit the part will go into, the LED Circuit simulator shows how a simple load behaves with its supply.

Pick A Decoupling Capacitor For A Chip

Almost every chip on a board needs a decoupling capacitor close to its power pin, and the standard choice is 100 nF, which is code 104. Type 104 to confirm the value, then check the tolerance line, since a K part can sit anywhere from 90 nF to 110 nF and still be in specification.

Check A Replacement Before You Solder It

A repair often needs a capacitor with the same value as the failed one, and the failed part may be the only source of that value. Decode its code, read the nearest standard E12 value, and order that part with confidence instead of guessing from the size of the package. When the replacement is part of a timing circuit, the 555 Timer simulator shows how the timing changes with the value.

Quality And Settings

The calculator has no quality setting to tune, because decoding a code is exact arithmetic rather than a matter of taste. The settings that matter are the mode and the unit, and both are chosen before the calculation runs. The tolerance letter is read from the code itself, never guessed, and a letter the tool does not recognise is refused with a clear message.

Advertisement
  • Decode mode reads three digit, two digit, single digit and four digit codes, and decimal letter codes such as 4n7 and 2u2.
  • Reverse mode returns a three digit code for values from 1 pF up to 99 µF, and an R code such as 4R7 for values below 10 pF.
  • Tolerance letters B, C, D, F, G, H, J, K, M, N and Z are recognised.
  • A third digit of 8 means times 0.01 and a third digit of 9 means times 0.1, following the standard EIA rule for small values.
  • Every result shows picofarads, nanofarads and microfarads together, plus the nearest standard E12 value and the tolerance when present.

When a code cannot be decoded, the error message names the problem and gives an example of a code that works. Compare the decoded value with the datasheet before relying on it.

How Capacitor Code Calculator Works?

The tool reads the code in picofarads, because the EIA three digit code is defined in picofarads. The first two digits are the significant figures and the third digit is the power of ten that multiplies them, so 104 is 10 times 10 to the power of 4, which is 100,000 pF. A third digit of 8 multiplies by 0.01 and a third digit of 9 multiplies by 0.1. The decimal letter codes work the same way with the letter as the decimal point: 4n7 is 4.7 nF and 2u2 is 2.2 µF. The tolerance letter is looked up in the standard table.

Reverse mode works backwards from the value: it takes the first two significant figures and counts how many zeros follow, so 100,000 pF gives the figures 10 and four zeros, which is the code 104, and 1,000,000 pF gives the code 105. The nearest standard value comes from the E12 series, which is 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68 and 82 repeated in every decade. The Logic Gate simulator is a useful next step for anyone building the digital circuit that the capacitor will support, and the marking codes page covers the wider marking standard that these codes come from.

Privacy

Capacitor Code Calculator runs entirely in the browser. The code that is typed, the value that is entered and the result that is shown never leave the device, and nothing is uploaded to a server or stored anywhere. There is no account and no tracking, and closing the page clears everything. When the same bench also needs a circuit checked, the Digital Circuit simulator works the same way, with everything running locally and nothing sent away.

Because nothing is stored, there is also nothing to delete and nothing to export. The downloaded text file is the only record, and it lives wherever the browser saves downloads.

Tips

A few habits make capacitor codes much easier to work with, and they cost nothing to adopt.

  • Read the code with the part held so the digits are upright, since a 104 turned upside down reads as h01 and a 666 can look like 999.
  • Remember that the code is always in picofarads, so 104 is 100 nF and not 104 nF, and 102 is 1 nF and not 102 of anything.
  • Check the tolerance letter before ordering, because a K part at the edge of its band can be ten percent away from the printed value.
  • Keep a short list of the codes used most often: 102 is 1 nF, 103 is 10 nF, 104 is 100 nF, 105 is 1 µF, 223 is 22 nF and 473 is 47 nF.
  • Measure with a capacitance meter when the circuit is fussy, since old capacitors drift and the code only states what the part was when it was made.

When a capacitor has no marking at all, which is common on small surface mount parts, the code cannot help and the part has to be identified from the reel label, the parts list or a meter. For a board level check after the part is fitted, the Breadboard Circuit simulator shows the circuit working before anything is soldered, and the Seven Segment Display simulator covers the display side of a finished project.

More Tools For The Same Job

The tools below solve the jobs that sit next to capacitor codes on the same bench.

FAQ

The questions below cover the points that come up most often when a capacitor code is decoded for the first time.

What Does 104 Mean On A Capacitor?

104 means 10 followed by four zeros in picofarads, which is 100,000 pF. That is the same value as 100 nF or 0.1 µF. The first two digits are the significant figures and the third digit is the number of zeros, so the code is read in picofarads and then converted to the other units.

What Does 473K Mean On A Capacitor?

473K means 47 followed by three zeros in picofarads, which is 47,000 pF or 47 nF, with a tolerance of plus or minus 10 percent from the letter K. So the real part can measure from 42.3 nF to 51.7 nF.

How Do I Find The Code For 1 UF?

Switch the tool to Find the code for a value, type 1 and pick microfarads, then press Find Code. The answer is 105, because 1 µF is 1,000,000 pF, which is 10 followed by five zeros. The tool also shows the value in picofarads and nanofarads so the result can be checked.

Does The Code Tell Me The Voltage Rating?

No, the three digit code gives only the capacitance, and the voltage rating is printed separately or coded by the maker in its own scheme. A part must be chosen so its voltage rating is higher than the highest voltage the circuit will put across it, and the datasheet is the only safe source for that rating.

Is Capacitor Code Calculator By TechnSols Free?

Yes, Capacitor Code Calculator by TechnSols is completely free to use online, with no sign up, no install and no limit on the number of calculations. It runs in the browser, nothing is uploaded, and the text summary downloads free too.

Capacitor codes stop being a puzzle once the rule is known, and the calculator keeps that rule close at hand for every part on the bench. Decode the code, check the tolerance, compare the nearest standard value, and fit the part with confidence.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement