TechnSols
Advertisement

Pulley System Calculator

Pulley System Calculator free online: work out pulley ratio, driven RPM, belt speed and mechanical advantage. No install, no sign-up, runs in your browser.

Be the first to rate this tool

Enter the pulley diameters and the driver speed, then press Calculate Pulley System.

What Is Pulley System Calculator?

Pulley System Calculator is a free online tool by TechnSols that works out the numbers for a two pulley belt drive from the pulley diameters and the driver speed. Type the driver and driven diameters, add the driver speed in RPM, and the tool gives the pulley ratio, the driven speed, the belt speed, and the mechanical advantage, with a diagram of the two pulleys joined by a belt.

Advertisement

A belt drive moves rotation from one shaft to another, and the pulley sizes decide what happens to the speed and the force. A small driver pulley turning a large driven pulley slows the output down and raises the force, while a large driver turning a small driven pulley speeds the output up and lowers the force. When the shaft speeds need checking in other units, the Speed Converter changes RPM into other speed units. When the power through the drive needs checking, the Power Converter changes watts into horsepower and back. When the pulley sizes need checking in inches, the Length Converter changes millimetres into inches and back.

The diagram is what makes this tool different from a plain calculator. The two pulleys are drawn side by side from your inputs, joined by a belt loop, so a 100 millimetre driver next to a 200 millimetre driven pulley looks like a small pulley driving a pulley twice its size. Everything runs in your browser, and no file is uploaded anywhere. The result can be downloaded as a short text summary to keep with the design.

How To Use Pulley System Calculator?

Using Pulley System Calculator takes less than a minute, with no software to install and no account to make. Type the two pulley diameters, add the driver speed, press the button, and read the ratio, the driven speed, the belt speed, and the mechanical advantage.

Step 1: Enter The Pulley Diameters

Type the diameter of the driver pulley in millimetres, which is the pulley on the motor or input shaft. Then type the diameter of the driven pulley in millimetres, which is the pulley on the output shaft that does the work. Both diameters must be more than 0 and 5000 millimetres or less. Measure across the belt groove, where the belt sits.

Step 2: Enter The Driver Speed

Type the driver speed in revolutions per minute, which is how fast the driver pulley spins. The driver speed must be more than 0 and 100000 RPM or less. A common motor speed is 1440 RPM, and the example uses that value, so a standard motor driving a pulley twice its size gives 720 RPM on the output shaft.

Step 3: Read The Result And Download The Summary

Press Calculate Pulley System and read the pulley ratio, the driven speed in RPM, the belt speed in metres per second, the mechanical advantage, and the type of drive, which is reduction, overdrive, or direct drive. Download the text summary with the Download button for a record, and change any input to work out a new drive: the old result clears at once, so a stale answer is never shown.

The whole check is one calculation, and the numbers can be used straight in a belt drive sketch or a motor sizing note.

Why Pulley Ratios Matter

Pulleys decide how fast a machine moves and how hard it can push, and the ratio is the single number that sets both. A motor that spins at 1440 RPM is too fast for a saw, a pump, or a conveyor, and a belt drive slows it down to a useful speed while raising the force by the same factor. The Pulley page explains how pulleys, belts, and mechanical advantage work together in a drive.

Speed And Force Trade Places

Speed and force trade against each other in a fixed way. When the ratio is more than 1, the output turns slower and stronger by that factor. When the ratio is less than 1, the output turns faster and weaker. The belt speed stays the same on both pulleys, because the belt cannot stretch and slip at once, so the larger pulley must turn more slowly to match the belt. This trade is why a drill press has stepped pulleys for slow drilling and fast sanding. When the energy through the drive needs checking, the Energy Converter changes joules into kilowatt hours and back.

Belt Speed Sets The Belt Choice

The belt speed is the number that matters most to the belt maker. A belt that runs too fast heats up, wears quickly, and can throw itself off the pulleys, while a belt that runs too slowly carries less power than the drive needs. Most V belts are happiest between about 5 and 25 metres per second, and the tool shows the belt speed at once, so the belt type can be checked against the maker table before parts are ordered.

One Wrong Pulley Wastes The Motor

A motor works best in a narrow speed range, and the pulley ratio is what keeps it there. A ratio that is too low forces the motor to run slowly under heavy load, where it draws more current and heats up. A ratio that is too high spins the load faster than it needs to go and leaves force unused. The Pulley Calculator page works through the same belt drive formulas with a worked example, which is a useful cross check for the numbers here.

What Can You Do With Pulley System Calculator?

Pulley System Calculator fits any job where two pulleys are joined by a belt and the speed or force on the output shaft matters. These are the jobs it handles best, from a workshop machine to a farm pump.

Slow A Motor Down For A Machine

A workshop machine such as a lathe, a saw, or a drill press needs a much lower speed than the motor gives, and a belt drive is the usual way to get it. A 100 millimetre driver at 1440 RPM driving a 200 millimetre driven pulley gives a 2 to 1 ratio, so the output turns at 720 RPM with twice the ideal force. When the force on the shaft needs checking, the Force Calculator works it out from mass and acceleration.

Speed A Fan Or Pump Up

A fan or a pump sometimes needs to spin faster than the motor, and a belt drive with a larger driver and a smaller driven pulley gives that overdrive. A 200 millimetre driver at 1440 RPM driving a 100 millimetre driven pulley gives a 1 to 2 ratio, so the output turns at 2880 RPM with half the ideal force. When the twisting force on the shafts needs checking, the Torque Calculator works it out from force and distance.

Check A Replacement Pulley

When a pulley is worn or cracked, the replacement must have the same diameter, or the ratio changes and the machine behaves differently. Measure the old pulley across the belt groove and its partner, and check the ratio in the tool. If the replacement has a different diameter, the tool shows the new driven speed and belt speed at once, so the change can be judged before the part is fitted. When the two diameters need comparing as a plain ratio, the Ratio Calculator checks any two numbers as a simplified ratio.

Every belt drive job needs the same three answers, the ratio, the driven speed, and the belt speed, and this tool gives all three from the same three inputs.

Advertisement

Quality And Settings

Pulley System Calculator keeps its settings simple, because a belt drive needs only three numbers. The inputs are checked before any calculation runs, so a bad value produces a plain message instead of a wrong answer.

  • Driver diameter: more than 0 and 5000 millimetres or less, already filled with 100.
  • Driven diameter: more than 0 and 5000 millimetres or less, already filled with 200.
  • Driver speed: more than 0 and 100000 RPM or less, already filled with 1440 RPM.
  • Belt speed: shown in metres per second, from the driver diameter and driver speed.
  • Results are ideal: they assume no belt slip and no losses, so real speed is lower.

When an input changes, the old result clears at once, and the diagram is redrawn from the new diameters, so the picture always matches the numbers on screen. If the numbers need changing between units, the Unit Converter changes them in seconds.

How Pulley System Calculator Works

The calculator divides the driven diameter by the driver diameter to get the pulley ratio, then simplifies it to whole numbers with the greatest common divisor. A 100 millimetre driver and a 200 millimetre driven pulley give 200 divided by 100, which is 2, so the ratio is 2 to 1. The driven speed is the driver speed times the driver diameter divided by the driven diameter, so 1440 times 100 divided by 200 is 720 RPM. The belt speed is pi times the driver diameter in metres times the driver RPM divided by 60, so pi times 0.1 times 1440 divided by 60 is 7.54 metres per second. The mechanical advantage is the driven diameter divided by the driver diameter, which is 2.

Two honest limits are worth knowing. First, the results assume no belt slip and no losses: a real belt slips a little, especially under heavy load or with low tension, so the true driven speed is a little lower than the figure shown, and the true force is lower too. Second, the tool covers one open belt drive with two pulleys only: it does not work out belt length, which needs the centre distance as well, and it does not cover lifting pulley systems, where the advantage comes from the number of rope parts, not the pulley sizes.

Privacy

Everything you calculate stays in your browser. Pulley System Calculator runs on your own computer, and nothing you type is uploaded to a server, stored, or shared with anyone. The tool does its job and shows the answer, and that is all it does.

Because no account is needed, there is no name, email, or history tied to what you do. Closing the tab ends the session, and the browser clears the numbers from memory.

Tips

A few habits make Pulley System Calculator work smoother.

  • Measure pulley diameters across the belt groove, where the belt sits.
  • Remember that swapping driver and driven inverts the ratio.
  • Check the belt speed against the belt maker range before you order.
  • Treat the driven speed as ideal, and allow a little slip under load.
  • Download the summary before you clear the numbers.

When the ratio matches the speed the load needs and the belt speed sits inside the maker range, the drive is right. If the pulley face area needs checking, the Area Converter changes square millimetres into square inches.

More Tools For The Same Job

These tools handle the same kinds of jobs: machines, motion, and the numbers behind them.

FAQ

Common questions about pulley systems and this tool, answered plainly.

Is Pulley System Calculator By TechnSols Free?

Yes, Pulley System Calculator by TechnSols is completely free to use, with no account, no sign-up, and no usage limit. You can work out as many pulley drives as you like, and everything runs in your browser, so nothing is uploaded or stored anywhere.

What Is A Pulley Ratio?

A pulley ratio is the driven diameter divided by the driver diameter, written as a ratio such as 2 to 1. It says how many turns the driver makes for each turn of the driven pulley. A ratio above 1 is a reduction, a ratio below 1 is an overdrive, and a ratio of 1 is direct drive.

How Do I Work Out Belt Speed?

Multiply pi by the driver diameter in metres and by the driver RPM, then divide by 60. A 100 millimetre driver at 1440 RPM gives pi times 0.1 times 1440 divided by 60, which is 7.54 metres per second. The belt speed is the same on both pulleys when there is no slip.

What Is Mechanical Advantage In A Belt Drive?

Mechanical advantage is the driven diameter divided by the driver diameter, which is the same as the pulley ratio. A ratio of 2 means the output turns with twice the ideal force of the input, and at half the speed. Real force is lower, because a belt drive loses some force to slip and friction.

Can I Download My Pulley Calculation?

Yes, you can download the result as a short text summary with the Download button. The summary lists the pulley diameters, the driver speed, the ratio, the driven speed, the belt speed, and the mechanical advantage, so it works as a record for the design.

Enter the pulley diameters, add the driver speed, and read the ratio. A belt drive sized this way turns at the speed the load needs, with the force the job needs.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement