What Is Brick Quantity Calculator?
Brick Quantity Calculator is a free online tool by TechnSols that counts bricks for any wall. Counting bricks by hand is slow work, and guessing is worse. Order too few and the bricklayer stops while a second delivery is arranged, and the new batch may not match the colour of the first. Order too many and pallets of bricks sit in the garden, get broken, and end up as rubble. This free brick calculator counts them from two measurements you already know: the length and the height of the wall, and it runs online in your browser with no sign up. Pick the brick size, add a little waste, and the tool shows the wall area and the brick count.
The count includes the mortar joint, which is the part most hand counts forget. A standard brick is 190 by 90 by 90 millimetres, but with a 10 millimetre mortar joint it covers 200 by 100 millimetres, so 50 bricks cover one square metre. A worked example helps: a wall 10 metres long and 3 metres high needs “Wall area: 30 m2” and “Bricks needed: 1,575 bricks” with 5 percent waste. You can read more about how bricks are made and laid in the guide to Brick, which explains the sizes, the bonds and the mortar that holds them together.
How To Use Brick Quantity Calculator
There are only three steps. Pick your units, type the wall size and the brick size, and read the result that appears live on the page.
Pick Metric Or Imperial
Start by choosing the unit system your plans use. Metric takes the wall in metres and counts standard or engineering bricks, while Imperial takes the wall in feet and counts standard or modular bricks. Pick the one that matches the numbers you already have. If your wall is measured in a different unit, Area Converter changes square metres into square feet in seconds.
Enter The Wall Length And Height
Type the wall length in the length field and the wall height in the height field. Measure the length along the face of the wall and the height from the footing to the top course. Then pick the brick size and the waste percentage. If your measurements are written in feet and inches, Length Converter changes them into metres without any mental maths.
Read And Copy The Result
The result shows live as you type, with no button to press. When both fields are filled, you see the wall area, the bricks per square metre or square foot, and the total brick count with waste included. The Copy result button copies all of that in one go, ready to paste into a message to your supplier or a note for the job. If you want the wall area in another unit, Unit Converter handles length, area and volume in one place.
That is the whole job. Two numbers in, one clear count out, and the answer updates the moment you change anything, so you can see at once how a taller wall changes the order.
Why Count How Many Bricks You Need Before You Order?
Bricks are bought by the pallet, delivered by the truck, and matched by the batch. Counting them before you order keeps the brick wall one colour, one delivery and one price.
Keep The Colour Matched
Bricks from different batches can look different, and a wall finished with a second batch can show a visible line. Ordering the full count at once means the whole wall comes from one batch and one colour.
Avoid A Second Delivery
A second delivery costs as much in time as in money. The bricklayer stops, the scaffold waits, and the job loses a day. A counted order arrives once and the work runs without a break.
Stop Paying For Broken Bricks
Spare bricks left on site get broken, buried and lost. A count with a sensible waste allowance is cheaper than a pallet ordered just in case and never used.
What Can You Do With Brick Quantity Calculator?
The result is a single brick count with the wall area beside it, but the uses around it are practical and everyday. These are the ones people come back for.
Build A Garden Wall
A garden wall is the most common job. Measure the length along the garden and the height from the footing to the top course, then pick the brick size. A wall 10 metres long and 1 metre high needs 500 bricks before waste, which is a small order a yard can deliver the same day. If you want the volume of the wall as well, Volume Converter works it out from the same measurements.
Price A House Extension
Once you know the brick count, you can price the wall. Multiply the count by the brick price, add the mortar and the labour, and the cost of the job is clear before the first course is laid. For the share of the budget the bricks take, Percentage Calculator turns any part into a percent of the whole.
Compare Brick Sizes
Changing the brick size changes the count. An engineering brick covers less face area than a standard brick, so the same wall needs 59 bricks per square metre instead of 50. For the price gap between the two sizes, Ratio Calculator compares them in one step.
Brick Quantity Calculator Quality And Settings
The tool is built to be exact and honest. It counts the mortar joint, it shows the bricks per square metre or square foot beside the total, and it never changes a number you typed.
- Two unit systems: Metric with metres and standard or engineering bricks, or Imperial with feet and standard or modular bricks. The formula changes with the units, so the answer stays the same either way.
- Live result: the wall area and the brick count appear as you type, with no Convert button and no Calculate button to press.
- Mortar joint included: the count uses the brick face plus a 10 mm joint in Metric mode and a 3/8 in joint in Imperial mode, so the figure matches what a bricklayer actually lays.
- Waste allowance: pick 0, 5 or 10 percent for cuts, breakage and mistakes, and the tool adds it on top and rounds the total up to whole bricks.
- Copy the result: the Copy result button copies the brick count, the wall area and the bricks per square unit in one go, ready to paste anywhere.
If a field is empty, the tool shows the plain status “Enter the wall length and height.” instead of guessing a number. That way you never see a result built on a missing value.
How Brick Quantity Calculator Works
The tool runs entirely in your browser. It multiplies the wall length by the wall height to get the area, multiplies by the bricks per square metre or square foot for the brick size you picked, adds the waste percentage, and rounds up to whole bricks. The Brick Industry Association publishes the same estimating practice that builders follow, which is why the figures from this tool match the figures a yard quotes.
Because the maths runs on your device, nothing is uploaded and nothing is stored. The waste percentage is yours to choose, because a straight wall needs less than a wall full of corners and openings, and the tool never hides the allowance inside the count.
Privacy
Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.
That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.
Tips
A few small habits make the number you get back more useful and easier to trust.
- Subtract openings first: take the area of doors and windows off the wall area before you count, or the tool counts bricks for holes. For the area of an opening, use the same length times height maths on the opening itself.
- Allow more waste for corners: a straight run needs about 5 percent waste, but a wall with corners, piers and arches needs 10 percent, because every cut wastes half a brick. For the days the job will take, Working Days Calculator counts the working days between two dates.
- Count both skins: a cavity wall has two leaves of brickwork, so count the wall twice, once for each skin. For the time the bricklayer will spend on the job, Time Duration Calculator measures how long the work actually lasted.
- Order from one batch: ask the yard to supply the whole order from one batch, and keep a few spare bricks from the same batch for repairs later. For the mean of several wall measurements, Average Calculator works it out from any list you type.
- Do not guess the height: a guessed height gives a guessed count, so measure once properly and use the same figures every time.
The cleanest results come from real measurements taken at the wall, with openings taken off first. Guessed lengths give guessed counts, so measure twice and order once.
More Tools For The Same Job
Ten more tools cover the jobs around this one, from the concrete in the footing to the paint on the wall.
The Cement Bag Calculator counts the cement bags you need.
- Concrete Volume Calculator: if the wall needs a concrete footing, a concrete volume calculator works out the cubic metres and the bag count from the length, width and depth.
- Cement Bag Calculator: if you mix your own mortar and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
- Tile Quantity Calculator: if the room gets a tiled floor, a tile quantity calculator counts the tiles from the room size and the tile size.
- Paint Coverage Calculator: if the wall needs paint, a paint coverage calculator works out the litres or gallons from the area and the coats.
- Flooring Calculator: if the room gets laminate or vinyl, a flooring calculator works out the area and the boxes from the room size.
- Roof Pitch Calculator: if the build goes up to the roof, a roof pitch calculator works out the pitch and the angle from the rise and the run.
- Staircase Calculator: if the build has two floors, a staircase calculator works out the steps, the riser height and the total run.
- Gravel Calculator: if you need a hardcore base under the wall, a gravel calculator works out the volume and the weight from the length, width and depth.
- Drywall Sheet Calculator: if the inside walls are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
- Area Converter: works out areas between square metres, square feet, acres and hectares, with the result live as you type.
FAQ
Short answers to the questions people ask most about brick quantities.
How Many Bricks Do I Need For A Brick Wall?
A standard 190 by 90 by 90 millimetre brick needs 50 bricks per square metre, including the 10 millimetre mortar joint. An engineering brick needs 59 per square metre, because its face is smaller.
How Many Bricks Do I Need Per Square Foot?
A standard 8 by 2.25 inch brick needs 6.55 bricks per square foot, including the 3/8 inch mortar joint. A modular brick needs 6.86 per square foot.
How Much Waste Should I Allow For Bricks?
Allow 5 percent for a straight wall and 10 percent for a wall with corners, piers, arches or many openings. The waste covers cuts, breakage and the odd mistake, and this tool adds it on top of the count.
Do I Count Bricks For Doors And Windows?
No. Take the area of every door and window off the wall area first, then count the bricks for what is left. Counting the openings as wall wastes money on bricks that are never laid.
Is My Data Saved Anywhere?
No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.
Is Brick Quantity Calculator by TechnSols Free?
Yes, Brick Quantity Calculator by TechnSols is completely free to use. You can work out your brick quantity as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
Bricks are bought by the pallet and matched by the batch, so the count is worth working out before the yard is phoned. Measure the wall, take off the openings, and order with the figure in front of you.