What Is Gravel Calculator?
Gravel Calculator is a free online tool by TechnSols that works out gravel for any job. Gravel is ordered by weight and laid by volume, so the question is always two questions at once: how many cubic metres do I need, and how many tonnes is that. Buy too little and the drive stops halfway, the base is thin in places, and a second delivery costs almost as much as the first. Buy too much and a pile of gravel sits in the drive for months. Gravel Calculator answers both questions from three measurements you already know: the length, the width and the depth of the area. Type them in, pick the material, and the tool shows the volume and the weight.
This free gravel calculator works online for gravel, crushed stone, sand and topsoil, because the maths is the same and only the density changes. A worked example helps: an area 5 metres by 4 metres at 10 centimetres deep needs “Volume: 2 m3” and “Gravel needed: 3.2 tonnes”. You can read more about what gravel is and how it is used in the guide to Gravel, which explains the sizes, the grades and the ground it covers.
How To Use Gravel Calculator
There are only three steps. Pick your units, type the length, width and depth, and read the result that appears live on the page.
Pick Metric Or Imperial
Start by choosing the unit system your tape measure uses. Metric takes the length and width in metres and the depth in centimetres, and counts tonnes, while Imperial takes the length and width in feet and the depth in inches, and counts US tons. Pick the one that matches the numbers you already have. If your area is written in a different unit, Volume Converter changes cubic metres into cubic feet or cubic yards in seconds.
Enter Length Width And Depth
Type the length in the length field, the width in the width field, and the depth in the depth field. Depth is the thickness of the gravel layer, and for a driveway it is usually 10 centimetres, or 4 inches. Measure the depth at the edging, not at the highest point of the ground underneath. If you want the weight of the order in another unit, Weight Converter turns tonnes into kilograms or pounds without any mental maths.
Read And Copy The Result
The result shows live as you type, with no button to press. When all three fields are filled, you see the material weight, the volume in cubic metres or cubic feet, and the volume in cubic yards. The Copy result button copies all of that in one go, ready to paste into a message to your supplier or a note for the job. If you work with other unit systems often, Unit Converter handles length, area and volume in one place.
That is the whole job. Three numbers in, one clear weight out, and the answer updates the moment you change anything, so you can see at once how a deeper layer changes the order.
Why Work Out How Much Gravel You Need First?
Gravel is bought by the tonne and delivered by the truck, and a second delivery costs nearly as much as the first. Working the amount out before you order keeps the base even, the delivery single and the price honest.
Avoid A Thin Base
A base that is thin in places sinks, ruts and lets weeds through. Knowing the volume in advance means the whole area gets the same depth, and the surface stays level for years.
Stop Paying For A Second Load
A second load costs as much in time as in money. The work stops, the truck comes back, and the job loses a day. A counted order arrives once and the work runs without a break.
Order In The Right Unit
Suppliers sell gravel by the tonne or the ton, and builders think in cubic metres or cubic yards. This tool gives you both figures together, so you can compare a price per tonne against a price per cubic yard without converting anything yourself.
What Can You Do With Gravel Calculator?
The result is a single weight with the volume beside it, but the uses around it are practical and everyday. These are the ones people come back for.
Lay A Gravel Driveway
A gravel driveway is the most common job. Measure the length and the width of the drive, then the depth from the edging. A drive 5 metres by 4 metres at 10 centimetres deep needs 2 cubic metres, which is 3.2 tonnes of gravel. If you want the area of the drive first, Area Converter works it out from the same two measurements.
Fill A Garden Path
A garden path is a small job, so the weight matters more than the volume. A path 10 metres long, 1 metre wide and 5 centimetres deep needs 0.5 cubic metres, which is 0.8 tonnes of gravel. If your path is measured in feet and inches, Length Converter changes it into metres without any mental maths.
Top Up A Flower Bed
Topsoil uses the same maths with a lighter density. A bed 5 metres by 4 metres at 10 centimetres deep needs 2 cubic metres, which is 2.4 tonnes of topsoil. For the share of the budget the topsoil takes, Percentage Calculator turns any part into a percent of the whole.
Gravel Calculator Quality And Settings
The tool is built to be exact and honest. It uses the standard densities for each material, it shows the volume beside the weight, and it never changes a number you typed.
- Two unit systems: Metric with metres, centimetres and tonnes, or Imperial with feet, inches and US tons. The formula changes with the units, so the answer stays the same either way.
- Live result: the weight and the volumes appear as you type, with no Convert button and no Calculate button to press.
- Four materials: Gravel, Crushed stone, Sand and Topsoil, each with its own density, because a cubic metre of topsoil weighs less than a cubic metre of gravel.
- Standard densities: gravel 1.6 tonnes per cubic metre, crushed stone 1.5, sand 1.6 and topsoil 1.2, with the Imperial figures in pounds per cubic foot to match.
- Copy the result: the Copy result button copies the weight and both volumes in one go, ready to paste anywhere.
If a field is empty, the tool shows the plain status “Enter the length, width and depth.” instead of guessing a number. That way you never see a result built on a missing value.
How Gravel Calculator Works
This gravel weight calculator runs entirely in your browser. In Metric mode it multiplies length by width by depth in centimetres divided by 100 to get cubic metres, then multiplies by the density of the material to get tonnes, and by 1.30795 for cubic yards. In Imperial mode it multiplies length in feet by width in feet by depth in inches divided by 12 to get cubic feet, then multiplies by the density in pounds per cubic foot and divides by 2000 for US tons. The Mineral Products Association publishes the same aggregate practice that quarries follow, which is why the figures from this tool match the figures a supplier quotes.
Because the maths runs on your device, nothing is uploaded and nothing is stored. The density is stated on the page for each material, so you can check the maths yourself, and the weight is always shown beside the volume so the two figures can be compared.
Privacy
Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.
That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.
Tips
A few small habits make the number you get back more useful and easier to trust.
- Measure the depth at the edging: take the depth from the top of the edging to the compacted ground, because that is the layer the gravel actually fills. For the mean of several depth readings, Average Calculator works it out from any list you type.
- Order a little extra: most builders add about 5 percent on top of the calculated weight for spillage and uneven ground.
- Compact in layers: lay gravel in layers of about 5 centimetres and compact each one, rather than tipping the whole depth at once, because a deep loose layer never settles evenly. For the price gap between two suppliers, Ratio Calculator compares them in one step.
- Check the density on the ticket: the density on the delivery ticket is the figure that matters, and wet gravel weighs more than dry gravel. For the saving if you collect it yourself, Discount Calculator works it out from the two figures.
- Do not guess the depth: a guessed depth gives a guessed weight, so measure once properly and use the same figures every time.
The cleanest results come from real measurements taken at the edging, with the depth checked in several places. Guessed lengths give guessed weights, so measure twice and order once.
More Tools For The Same Job
Ten more tools cover the jobs around this one, from the concrete in the base to the bricks on the wall.
The Paint Coverage Calculator works out paint for any room.
- Concrete Volume Calculator: if the area needs a concrete slab instead of gravel, a concrete volume calculator works out the cubic metres and the bag count from the length, width and depth.
- Cement Bag Calculator: if you mix your own concrete and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
- Brick Quantity Calculator: if you are building a wall beside the drive, a brick quantity calculator counts the bricks from the wall length and height.
- Tile Quantity Calculator: if the floor gets tiles, a tile quantity calculator counts the tiles from the room size and the tile size.
- Paint Coverage Calculator: if the walls need paint, a paint coverage calculator works out the litres or gallons from the area and the coats.
- Flooring Calculator: if the rooms get laminate or vinyl, a flooring calculator works out the area and the boxes from the room size.
- Roof Pitch Calculator: if the build goes up to the roof, a roof pitch calculator works out the pitch and the angle from the rise and the run.
- Staircase Calculator: if the build has two floors, a staircase calculator works out the steps, the riser height and the total run.
- Drywall Sheet Calculator: if the walls are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
- Volume Converter: works out volumes between cubic metres, cubic feet, litres and gallons, with the result live as you type.
FAQ
Short answers to the questions people ask most about gravel quantities.
How Much Gravel Do I Need?
Multiply the length by the width by the depth to get the volume, then multiply by the density to get the weight. This gravel volume calculator does the first step for you, and shows the weight beside it. An area 5 metres by 4 metres at 10 centimetres deep needs 2 cubic metres, which is 3.2 tonnes of gravel.
How Many Tonnes Of Gravel Per Square Metre?
At 10 centimetres deep, one square metre needs 0.1 cubic metres, which is 0.16 tonnes of gravel. At 5 centimetres deep it needs 0.08 tonnes per square metre, and at 15 centimetres it needs 0.24 tonnes.
What Is The Difference Between Gravel And Crushed Stone?
Gravel is naturally rounded stone, while crushed stone is quarried rock broken into angular pieces. Crushed stone locks together better under a driveway, while rounded gravel is easier to walk on and better for paths.
How Deep Should A Gravel Driveway Be?
A gravel driveway is usually 10 centimetres deep, or 4 inches, on a compacted sub base. A path needs about 5 centimetres, and a heavy use drive needs 15 centimetres or more.
Is My Data Saved Anywhere?
No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.
Is Gravel Calculator by TechnSols Free?
Yes, Gravel Calculator by TechnSols is completely free to use. You can answer both questions from three measurements you already know as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
Gravel is bought by the tonne and delivered by the truck, so the weight is worth working out before the quarry is phoned. Measure the area, check the depth, and order with the figure in front of you.