What Is Roof Pitch Calculator?
Roof Pitch Calculator is a free online tool by TechnSols that works out the pitch from the two measurements that define it: the rise, which is how far the roof climbs, and the run, which is how far it travels sideways, with no install and no sign up. Every roof has a pitch, and the pitch decides almost everything about it: how fast rain runs off, which covering it can take, how much material it needs, and how steep it feels to walk on. Type them in, and the tool shows the pitch as a ratio, as rise over a 12 run, and as an angle in degrees.
This free roof pitch calculator runs online in your browser and needs no unit choice, because the rise and the run only need the same unit. A worked example helps: a rise of 6 over a run of 12 gives “Roof pitch: 6:12”, “Pitch ratio: 0.5” and “Roof angle: 26.57 degrees”. You can read more about how roof pitch is defined and measured in the guide to Roof pitch, which explains the rise, the run and the slope that follows.
How To Use Roof Pitch Calculator
There are only three steps. Measure the rise and the run, type them in, and read the result that appears live on the page.
Measure The Rise And Run
Start by measuring the rise and the run in the same unit. The rise is the vertical climb of the roof, and the run is the horizontal distance from the eave to the ridge. Measure both in inches, feet, centimetres or metres, as long as both use the same unit. If your measurements are written in a different unit, Length Converter changes feet into inches or metres into centimetres in seconds.
Enter Rise And Run
Type the rise in the rise field and the run in the run field. A roof that climbs 6 inches for every 12 inches of run is a 6:12 pitch, which is a common house roof. If your measurements are in different units, Unit Converter changes feet into inches or metres into centimetres in seconds.
Read And Copy The Result
The result shows live as you type, with no button to press. When both fields are filled, you see the pitch, the ratio and the angle in degrees. The Copy result button copies all of that in one go, ready to paste into a message to your roofer or a note for the job. If you want the length of the sloped roof surface itself, Square Root Calculator works out the square root of the rise squared plus the run squared.
That is the whole job. Two numbers in, one clear pitch out, and this roof slope calculator updates the moment you change anything, so you can see at once how a steeper rise changes the roof.
Why Work Out Roof Pitch Before You Build?
The pitch is the first number a roofer asks for, and it shapes the whole roof. Working it out before you order material or price the job keeps the covering, the structure and the cost in line.
Pick The Right Covering
Some coverings need a steep pitch and some work on a shallow one. Tiles need enough slope to shed water, while flat roof membranes work on almost no slope at all. Knowing the pitch first means the covering you order suits the roof you have.
Work Out The Roof Area
The roof area is bigger than the floor area, and the steeper the pitch, the bigger the difference. The pitch tells you how much bigger, so the material order is right and the price is honest.
Price The Job Before You Start
A steep roof costs more to build and more to work on than a shallow one, because the labour is slower and the access is harder. The pitch is the number that explains the price gap between two quotes.
What Can You Do With Roof Pitch Calculator?
The result is a single pitch with a ratio and an angle beside it, but the uses around it are practical and everyday. These are the ones people come back for.
Check An Existing Roof
The most common job is checking a roof that is already there. Measure the rise and the run from the loft or from the gable end, and the tool gives the pitch in the form your roofer uses. If you want the roof area from the pitch, Area Converter works it out from the same measurements.
Plan A New Roof
A new roof starts with the pitch. A 4:12 pitch is shallow and cheap to build, a 6:12 pitch is the common house roof, and a 12:12 pitch is a steep 45 degree roof. For the price gap between the two pitches, Ratio Calculator compares them in one step.
Match A Roof Extension
An extension should match the pitch of the main roof, or the join looks wrong and the water runs badly. Measure the main roof, then build the extension to the same pitch. For the share of the budget the roof takes, Percentage Calculator turns any part into a percent of the whole.
Roof Pitch Calculator Quality And Settings
The tool is built to be exact and honest. It shows the pitch three ways, it uses the standard arctangent for the angle, and it never changes a number you typed.
- No unit switch: rise and run only need the same unit, so there is no Metric or Imperial choice to get wrong. Inches, feet, centimetres or metres all give the same pitch.
- Live result: the pitch, the ratio and the angle appear as you type, with no Convert button and no Calculate button to press.
- Three ways to read it: the pitch as rise over a 12 run, the ratio as a plain number, and the angle in degrees, so the figure fits your plans, your roofer and your supplier.
- Standard angle maths: the angle is the arctangent of the rise over the run, which is the same maths a surveyor uses, so the degrees match the plans.
- Copy the result: the Copy result button copies the pitch, the ratio and the angle in one go, ready to paste anywhere.
If a field is empty, the tool shows the plain status “Enter the rise and the run.” instead of guessing a number. That way you never see a result built on a missing value.
How Roof Pitch Calculator Works
The tool runs entirely in your browser. It divides the rise by the run to get the ratio, multiplies the ratio by 12 to get the rise over a 12 run, and takes the arctangent of the ratio to get the angle in degrees. The Roofing Contractors Association publishes the same pitch practice that roofers follow, which is why the figures from this tool match the figures a roofer quotes.
Because the maths runs on your device, nothing is uploaded and nothing is stored. The rise and the run must both be more than zero, because a roof with no rise is flat and a roof with no run is a wall, and the tool asks you to check the numbers instead of giving a silly answer.
Privacy
Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.
That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.
Tips
A few small habits make the number you get back more useful and easier to trust.
- Measure from the same points: take the rise and the run from the same two points on the roof, because a rise measured at the ridge and a run measured at the eave belong together. For the mean of several measurements, Average Calculator works it out from any list you type.
- Use a level for the run: the run is horizontal, not along the slope, so hold a level flat and measure across it. Measuring along the slope gives a longer run and a shallower pitch than the roof really has.
- Check the pitch in two places: measure the pitch at both ends of the roof, because an old roof can sag in the middle. For the time the roofer will spend on the job, Time Duration Calculator measures how long the work actually lasted.
- Write the pitch as rise over 12: roofers quote pitch as rise over a 12 run, so “6:12” is clearer than “0.5” or “26.57 degrees” on a message to your roofer. For the days the job will take, Working Days Calculator counts the working days between two dates.
- Do not guess the rise: a guessed rise gives a guessed pitch, so measure once properly and use the same figures every time.
The cleanest results come from real measurements taken from the same two points, with the run kept level. Guessed rises give guessed pitches, so measure twice and build once.
More Tools For The Same Job
Ten more tools cover the jobs around this one, from the concrete in the walls to the staircase under the roof.
You can also use the Staircase Calculator, which plans steps for any staircase.
- Concrete Volume Calculator: if the build needs a concrete slab first, a concrete volume calculator works out the cubic metres and the bag count from the length, width and depth.
- Cement Bag Calculator: if you mix your own concrete and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
- Brick Quantity Calculator: if you are building a wall as well as a roof, a brick quantity calculator counts the bricks from the wall length and height.
- Tile Quantity Calculator: if the floor gets tiles, a tile quantity calculator counts the tiles from the room size and the tile size.
- Paint Coverage Calculator: if the walls need paint, a paint coverage calculator works out the litres or gallons from the area and the coats.
- Flooring Calculator: if the rooms get laminate or vinyl, a flooring calculator works out the area and the boxes from the room size.
- Staircase Calculator: if the build has two floors under the roof, a staircase calculator works out the steps, the riser height and the total run.
- Gravel Calculator: if you need a hardcore base under the building, a gravel calculator works out the volume and the weight from the length, width and depth.
- Drywall Sheet Calculator: if the walls under the roof are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
- Length Converter: works out lengths between inches, feet, metres and centimetres, with the result live as you type.
FAQ
Short answers to the questions people ask most about roof pitch.
How To Calculate Roof Pitch?
Divide the rise by the run. A roof that rises 6 inches over a run of 12 inches has a pitch of 6:12, a ratio of 0.5 and an angle of 26.57 degrees. Type the two numbers into this tool and it shows all three figures at once.
What Is A Good Roof Pitch?
A 4:12 to 6:12 pitch suits most houses: steep enough to shed rain and snow, shallow enough to build and walk on. A 3:12 pitch is the shallowest most tiles allow, and a 12:12 pitch is a steep 45 degree roof.
What Is Roof Pitch In Degrees?
It is the angle of the roof slope. A 6:12 pitch is 26.57 degrees, a 4:12 pitch is 18.43 degrees, and a 12:12 pitch is 45 degrees. This roof angle calculator shows the degrees beside the pitch.
How Do I Measure Roof Pitch?
Measure the rise, which is the vertical climb, and the run, which is the horizontal distance, both in the same unit. Hold a level flat for the run, because the run is horizontal and not along the slope.
Is My Data Saved Anywhere?
No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.
Is Roof Pitch Calculator by TechnSols Free?
Yes, Roof Pitch Calculator by TechnSols is completely free to use. You can work out the pitch from the two measurements that define it as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
The pitch is the first number a roofer asks for, so it is worth working out before the covering is ordered. Measure the rise and the run, type the two numbers, and build with the figure in front of you.