TechnSols
Advertisement

Concrete Volume Calculator

Concrete volume calculator free online. Work out cubic metres, cubic yards and bags of mix for any slab, with no install and no sign up.

Be the first to rate this tool

Enter the length, width and depth.

What Is Concrete Volume Calculator?

Concrete Volume Calculator is a free online tool by TechnSols that works out concrete for any slab. Ordering concrete is one of those jobs where a small mistake costs real money. Order too little and the pour stops halfway, the slab sets in two layers, and the truck has to come back for a short load that costs almost as much as a full one. Order too much and you pay for concrete that ends up as a lump in the yard. Concrete Volume Calculator takes the guesswork out of it. Type the length, width and depth of the slab, footing or column, and it works out the volume in cubic metres or cubic feet, converts it to cubic yards, and tells you how many bags of premixed concrete the job needs. This free concrete calculator runs online in your browser and needs no sign up.

Advertisement

The tool is built for the way people actually order concrete. Ready mix suppliers sell by the cubic metre or cubic yard, while bagged premix is sold by the bag, so the result gives you both figures at once. A worked example helps: a slab 5 metres long, 4 metres wide and 0.15 metres thick needs “Concrete volume: 3 m3”, “Cubic yards: 3.92 yd3” and “40 kg bags of premixed concrete: 150 bags”. You can read more about what concrete is and how it sets in the guide to Concrete, which explains the mix, the pour and the curing that follows.

How To Use Concrete Volume Calculator

There are only three steps. Pick your units, type the three measurements, and read the result that appears live on the page.

Pick Metric Or Imperial

Start by choosing the unit system your tape measure uses. Metric takes metres for length and width and metres for depth, while Imperial takes feet for length and width and inches for depth. Pick the one that matches the numbers you already have, so you do not have to convert anything in your head first. If your measurements are written in a different unit, Volume Converter changes cubic metres into cubic feet or cubic yards in seconds.

Enter Length Width And Depth

Type the length in the length field, the width in the width field, and the depth in the depth field. Depth is the thickness of the slab, and for a normal house slab it is usually 0.1 to 0.15 metres, or 4 to 6 inches. Measure the depth at the formwork, not at the highest point of the ground underneath. If you work with other unit systems often, Unit Converter handles length, area and volume in one place.

Read And Copy The Result

The result shows live as you type, with no button to press. When all three fields are filled, you see the volume, the cubic yards, and the number of bags. The Copy result button copies all of that in one go, ready to paste into a message to your supplier or a note for the job. If you want to check the weight of the order before the truck arrives, Weight Converter turns tonnes into kilograms or pounds without any mental maths.

That is the whole job. Three numbers in, one clear answer out, and the answer updates the moment you change anything, so you can see at once how a thicker slab changes the order.

Why Work Out How Much Concrete You Need First?

Concrete cannot be returned once it is mixed, and a short load costs nearly as much as a full one. Working the volume out before you phone the supplier is the cheapest part of the whole job.

Avoid A Short Load

A pour that runs out halfway leaves a cold joint in the slab, which is a weak line where the first concrete started to set before the second arrived. Knowing the volume in advance means the truck carries enough for one continuous pour, and the slab sets as a single piece.

Stop Paying For Waste

Every extra cubic metre you order is money poured onto the ground. A volume figure worked out from real measurements, not a guess, keeps the order tight. The bag count does the same for small jobs, where ten extra bags is a noticeable cost.

Order In The Right Unit

Suppliers sell ready mix by the cubic metre or cubic yard, and bagged mix by the bag. This tool gives you all three figures together, so you can compare a ready mix price against a bagged mix price without converting anything yourself.

What Can You Do With Concrete Volume Calculator?

The result is a single volume with a bag count beside it, but the uses around it are practical and everyday. These are the ones people come back for.

Pour A House Slab

A house slab is the most common job. Measure the length and width inside the formwork, then the depth from the top of the formwork to the compacted ground. For a slab 10 metres by 8 metres at 0.15 metres thick, the tool shows 12 cubic metres, which is the figure the ready mix plant needs. If you want the floor area first, Area Converter works it out from the same two measurements.

Fill A Footing Or Column

Footings and columns are small volumes, so the bag count matters more than the cubic metres. A footing 6 metres long, 0.4 metres wide and 0.4 metres deep needs just under 1 cubic metre, which is about 48 bags of 40 kg premix. If your footing is measured in feet and inches, Length Converter changes it into metres without any mental maths.

Price The Job Before You Start

Once you know the volume, you can price the job. Multiply the cubic metres by the ready mix price per cubic metre, or the bag count by the bag price, and the cheaper option is obvious. For the share of the budget the concrete takes, Percentage Calculator turns any part into a percent of the whole.

Concrete Volume Calculator Quality And Settings

The tool is built to be exact and honest. It uses the standard conversion factors, it shows the bag count beside the volume, and it never changes a number you typed.

  • Two unit systems: Metric with metres for length, width and depth, or Imperial with feet for length and width and inches for depth. The formula changes with the units, so the answer stays the same either way.
  • Live result: the volume, the cubic yards and the bag count appear as you type, with no Convert button and no Calculate button to press.
  • Standard conversions: one cubic metre is 1.30795 cubic yards, and 27 cubic feet make one cubic yard, so the figures match what suppliers use.
  • Honest bag counts: 50 bags of 40 kg premix per cubic metre, and one 80 lb bag making 0.6 cubic feet. Both counts are rounded up, because part of a bag cannot be bought.
  • Copy the result: the Copy result button copies the volume, the cubic yards and the bag count in one go, ready to paste anywhere.

If a field is empty, the tool shows the plain status “Enter the length, width and depth.” instead of guessing a number. That way you never see a result built on a missing value.

Advertisement

How Concrete Volume Calculator Works

The tool runs entirely in your browser. In Metric mode it multiplies length by width by depth to get the cubic metres of concrete, then multiplies by 1.30795 for cubic yards and by 50 for the 40 kg bag count. In Imperial mode it multiplies length in feet by width in feet by depth in inches divided by 12 to get cubic feet, then divides by 27 for cubic yards and by 0.6 for the 80 lb bag count. The American Concrete Institute publishes the same volume and ordering practice that ready mix plants follow, which is why the figures from this tool match the figures a supplier quotes.

Because the maths runs on your device, nothing is uploaded and nothing is stored. The depth limits are there to catch typing slips: a slab thinner than 0.05 metres or thicker than 2 metres, or thinner than 1 inch or thicker than 36 inches, is almost certainly a mistyped number, so the tool asks you to check it instead of giving a silly answer.

Privacy

Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.

That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.

Tips

A few small habits make the number you get back more useful and easier to trust.

  • Measure inside the formwork: take the length and width from the inside faces of the formwork, because that is the space the concrete actually fills.
  • Check the depth in several places: the ground under a slab is rarely level, so measure the depth at four or five spots and use the deepest one. For the mean of several depth readings, Average Calculator works it out from any list you type.
  • Order a little extra: most builders add about 5 percent on top of the calculated volume for spillage and uneven ground. For the saving between the two quotes, Discount Calculator works it out from the two figures.
  • Compare ready mix and bags: for jobs under about 1 cubic metre, bags are often cheaper once delivery is counted, while larger jobs are almost always cheaper as ready mix. For the price gap between the two quotes, Ratio Calculator compares them in one step.
  • Do not guess the depth: a guessed depth gives a guessed volume, so measure once properly and use the same figures every time.

The cleanest results come from real measurements taken at the formwork. Guessed lengths give guessed volumes, so measure twice and order once.

More Tools For The Same Job

Ten more tools cover the jobs around this one, from the cement in the mix to the bricks on the wall.

For the same kind of job, the Drywall Sheet Calculator counts drywall sheets for any wall.

  • Cement Bag Calculator: if you mix your own concrete and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
  • Brick Quantity Calculator: if you are building a wall as well as a slab, a brick quantity calculator counts the bricks from the wall length and height.
  • Tile Quantity Calculator: if the slab gets a tiled floor, a tile quantity calculator counts the tiles from the room size and the tile size.
  • Paint Coverage Calculator: if the walls need paint after the slab is down, a paint coverage calculator works out the litres or gallons from the area and the coats.
  • Flooring Calculator: if the room gets laminate or vinyl instead of tiles, a flooring calculator works out the area and the boxes from the room size.
  • Roof Pitch Calculator: if the build goes up to the roof, a roof pitch calculator works out the pitch and the angle from the rise and the run.
  • Staircase Calculator: if the build has two floors, a staircase calculator works out the steps, the riser height and the total run.
  • Gravel Calculator: if you need a hardcore base under the slab, a gravel calculator works out the volume and the weight from the length, width and depth.
  • Drywall Sheet Calculator: if the walls are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
  • Volume Converter: works out volumes between cubic metres, cubic feet, litres and gallons, with the result live as you type.

FAQ

Short answers to the questions people ask most about concrete volume.

How Much Concrete Do I Need For A Slab?

Multiply the length by the width by the depth, all in the same unit. A slab 5 metres by 4 metres at 0.15 metres thick needs 3 cubic metres. This concrete slab calculator does the same maths and adds the cubic yards and the bag count beside it.

How Many Bags Of Concrete Make One Cubic Metre?

About 50 bags of 40 kg premixed concrete make one cubic metre, because one 40 kg bag makes about 0.02 cubic metres. The tool rounds the count up, so a job needing 3 cubic metres shows 150 bags.

What Depth Should A House Slab Be?

Most house slabs are 0.1 to 0.15 metres thick, or 4 to 6 inches, on compacted hardcore. Driveways and garage floors are often 0.15 metres or more. Always follow the depth on your plans or from your engineer.

How Many Cubic Yards Are In A Cubic Metre?

One cubic metre is 1.30795 cubic yards. A job needing 3 cubic metres needs 3.92 cubic yards. Suppliers in the United States sell by the cubic yard, so the tool shows both figures together.

Is My Data Saved Anywhere?

No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.

Is Concrete Volume Calculator by TechnSols Free?

Yes, Concrete Volume Calculator by TechnSols is completely free to use. You can take the guesswork out of it as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.

Concrete is the one material you cannot send back, so the volume is worth working out before the truck is booked. Measure the formwork, type the three numbers, and order with the figure in front of you.

Follow TechnSols on Google
Add TechnSols as a preferred source to see more of our tools in Google Search.
Add to Preferred Sources
Advertisement