What Is Tile Quantity Calculator?
Tile Quantity Calculator is a free online tool by TechnSols that counts tiles for any floor. Tiling a floor starts with one question: how many tiles do I need. Buy too few and the tiler stops while a second box is ordered, and the new box may not match the shade of the first. Buy too many and boxes of tile sit in the garage, get chipped, and end up as waste. This free tile calculator counts them from two measurements you already know: the length and the width of the floor, and it runs online in your browser with no sign up. Pick the tile size, add a little waste, and the tool shows the floor area and the tile count.
The count includes the waste allowance, which is the part most hand counts forget. Tiles are cut at edges, around pipes and in corners, and every cut wastes part of a tile, so a floor always needs more tiles than its bare area suggests. A worked example helps: a floor 5 metres by 4 metres with 600 by 600 millimetre tiles needs “Floor area: 20 m2” and “Tiles needed: 62 tiles” with 10 percent waste. You can read more about how tiles are made and laid in the guide to Tile, which explains the types, the sizes and the fixing that holds them down.
How To Use Tile Quantity Calculator
There are only three steps. Pick your units, type the floor size and the tile size, and read the result that appears live on the page.
Pick Metric Or Imperial
Start by choosing the unit system your tape measure uses. Metric takes the floor in metres and counts 300 by 300 up to 800 by 800 millimetre tiles, while Imperial takes the floor in feet and counts 12 by 12 up to 24 by 24 inch tiles. Pick the one that matches the numbers you already have. If your floor is measured in a different unit, Area Converter changes square metres into square feet in seconds.
Enter The Floor Length And Width
Type the floor length in the length field and the floor width in the width field. Measure wall to wall, and take the longest length and the widest width if the room is not square. Then pick the tile size and the waste percentage. If you work with other unit systems often, Unit Converter handles length, area and volume in one place.
Read And Copy The Result
The result shows live as you type, with no button to press. When both fields are filled, you see the floor area, the tile size, and the total tile count with waste included. The Copy result button copies all of that in one go, ready to paste into a message to your supplier or a note for the job. For the share of the budget the tiles take, Percentage Calculator turns any part into a percent of the whole.
That is the whole job. Two numbers in, one clear count out, and the answer updates the moment you change anything, so you can see at once how a bigger tile changes the order.
Why Count How Many Tiles You Need Before You Order?
Tiles are bought by the box, matched by the shade, and cut to fit. Counting them before you order keeps the floor one shade, one delivery and one price.
Keep The Shade Matched
Tiles from different batches can look different, and a floor finished with a second batch can show a visible line. Ordering the full count at once means the whole floor comes from one batch and one shade.
Avoid A Second Delivery
A second delivery costs as much in time as in money. The tiler stops, the adhesive waits, and the job loses a day. A counted order arrives once and the work runs without a break.
Stop Paying For Broken Tiles
Spare tiles left on site get chipped, cracked and lost. A count with a sensible waste allowance is cheaper than a box ordered just in case and never used.
What Can You Do With Tile Quantity Calculator?
The result is a single tile count with the floor area beside it, but the uses around it are practical and everyday. These are the ones people come back for.
Tile A Bathroom Floor
A bathroom floor is the most common job. Measure the length and the width wall to wall, then pick the tile size. A bathroom 3 metres by 2 metres with 300 by 300 millimetre tiles needs 67 tiles before waste, which is a small order a shop can supply the same day. If your bathroom is measured in feet and inches, Length Converter changes it into metres without any mental maths.
Price A Kitchen Floor
Once you know the tile count, you can price the floor. Multiply the count by the tile price, add the adhesive and the grout, and the cost of the job is clear before the first tile is laid. For the price gap between two tile ranges, Ratio Calculator compares them in one step.
Compare Tile Sizes
Changing the tile size changes the count a lot. A floor of 20 square metres needs 222 tiles at 300 by 300 millimetres but only 56 tiles at 600 by 600 millimetres, so the bigger tile is faster to lay. For the saving as a share of the first price, Discount Calculator works it out from the two figures.
Tile Quantity Calculator Quality And Settings
The tool is built to be exact and honest. It counts the waste allowance, it shows the tile size beside the total, and it never changes a number you typed.
- Two unit systems: Metric with metres and millimetre tile sizes, or Imperial with feet and inch tile sizes. The formula changes with the units, so the answer stays the same either way.
- Live result: the floor area and the tile count appear as you type, with no Convert button and no Calculate button to press.
- Four tile sizes each way: 300 by 300, 600 by 300, 600 by 600 and 800 by 800 millimetres, or 12 by 12, 12 by 24, 18 by 18 and 24 by 24 inches.
- Waste allowance: pick 0, 5, 10 or 15 percent for cuts, breakage and mistakes, and the tool adds it on top and rounds the total up to whole tiles.
- Copy the result: the Copy result button copies the tile count, the floor area and the tile size in one go, ready to paste anywhere.
If a field is empty, the tool shows the plain status “Enter the floor length and width.” instead of guessing a number. That way you never see a result built on a missing value.
How Tile Quantity Calculator Works
The tool runs entirely in your browser. It multiplies the floor length by the floor width to get the area, divides by the area of one tile, adds the waste percentage, and rounds up to whole tiles. The Tile Council publishes the same estimating practice that tilers follow, which is why the figures from this tool match the figures a shop quotes.
Because the maths runs on your device, nothing is uploaded and nothing is stored. The waste percentage is yours to choose, because a square room needs less than a room full of corners and pipes, and the tool never hides the allowance inside the count.
Privacy
Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.
That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.
Tips
A few small habits make the number you get back more useful and easier to trust.
- Allow more waste for diagonal layouts: tiles laid on the diagonal need about 15 percent waste, because every edge tile is cut at an angle. Straight layouts need about 10 percent, and large rooms need less.
- Keep a few spares from the same batch: buy the spares with the main order, not later, because a later box may not match the shade. For the mean of several floor measurements, Average Calculator works it out from any list you type.
- Measure the longest and widest points: a room that is not square still needs tiles for its longest length and widest width, so measure both at their longest. For the time the tiler will spend on the job, Time Duration Calculator measures how long the work actually lasted.
- Count the date you order: tile stock changes fast, so order as soon as the count is done rather than waiting a week. To count the days until the delivery, Countdown Calculator tells you how many days are left.
- Do not guess the floor size: a guessed size gives a guessed count, so measure once properly and use the same figures every time.
The cleanest results come from real measurements taken wall to wall, with the waste allowance matched to the layout. Guessed lengths give guessed counts, so measure twice and order once.
More Tools For The Same Job
Ten more tools cover the jobs around this one, from the concrete under the floor to the paint on the wall.
- Concrete Volume Calculator: if the floor needs a concrete slab first, a concrete volume calculator works out the cubic metres and the bag count from the length, width and depth.
- Cement Bag Calculator: if you mix your own screed and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
- Brick Quantity Calculator: if you are building a wall as well as tiling a floor, a brick quantity calculator counts the bricks from the wall length and height.
- Paint Coverage Calculator: if the walls need paint after the floor is tiled, a paint coverage calculator works out the litres or gallons from the area and the coats.
- Flooring Calculator: if another room gets laminate or vinyl instead of tiles, a flooring calculator works out the area and the boxes from the room size.
- Roof Pitch Calculator: if the build goes up to the roof, a roof pitch calculator works out the pitch and the angle from the rise and the run.
- Staircase Calculator: if the build has two floors, a staircase calculator works out the steps, the riser height and the total run.
- Gravel Calculator: if you need a hardcore base under the floor, a gravel calculator works out the volume and the weight from the length, width and depth.
- Drywall Sheet Calculator: if the walls are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
- Area Converter: works out areas between square metres, square feet, acres and hectares, with the result live as you type.
FAQ
Short answers to the questions people ask most about tile quantities.
How Many Tiles Per Square Metre Do I Need?
It depends on the tile size, and this floor tile calculator uses the size you pick. A 300 by 300 millimetre tile covers 0.09 square metres, so 12 tiles cover one square metre before waste. A 600 by 600 millimetre tile covers 0.36 square metres, so 3 tiles cover one square metre before waste.
How Much Waste Should I Allow For Tiles?
Allow 10 percent for a straight layout, 15 percent for a diagonal layout, and 5 percent for a large square room with few cuts. The waste covers cuts, breakage and the odd mistake, and this tool adds it on top of the count.
Do I Count Tiles For The Area Under Fixtures?
Yes, if the fixtures are fitted after the tiling. If the bath or the kitchen units sit on top of the tiles, count the whole floor. If the fixtures are already fixed to the floor, take their area off first.
How Many Tiles Are In A Box?
It changes with the tile size and the maker, so check the box label. Small tiles often come 10 or more to a box, while large tiles often come 3 or 4 to a box. This tool counts tiles, so divide the count by the tiles per box to get the boxes.
Is My Data Saved Anywhere?
No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.
Is Tile Quantity Calculator by TechnSols Free?
Yes, Tile Quantity Calculator by TechnSols is completely free to use. You can work out your tile quantity as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
Tiles are bought by the box and matched by the shade, so the count is worth working out before the shop is visited. Measure the floor, pick the tile size, and order with the figure in front of you.