What Is Paint Coverage Calculator?
Paint Coverage Calculator is a free online tool by TechnSols that works out paint for any room. Painting a room starts with one question: how much paint do I need. Buy too little and the second coat stops halfway, the shop runs out of your colour, and the wall dries with a visible line. Buy too much and tins of paint sit in the shed, go off, and end up as waste. This free paint calculator answers the question from two numbers you already know: the paintable area and the number of coats, and it runs online in your browser with no sign up. Type them in, pick the coverage from the tin, and the tool shows the paint needed and the tins to buy.
The maths behind the answer is the coverage printed on the tin. One litre of ordinary emulsion covers about 10 square metres per coat, and one gallon covers about 350 square feet per coat, so the area and the coats are all the tool needs. A worked example helps: walls of 50 square metres with 2 coats at 10 square metres per litre need “Paint needed: 10 litres” and “Buy 10 litres (rounded up)”. You can read more about what paint is and how it covers a wall in the guide to Paint, which explains the types, the finish and the coats that follow.
How To Use Paint Coverage Calculator
There are only three steps. Pick your units, type the area and the coats, and read the result that appears live on the page.
Pick Metric Or Imperial
Start by choosing the unit system your tape measure uses. Metric takes the area in square metres and counts litres at 10 or 12 square metres per litre, while Imperial takes the area in square feet and counts gallons at 350 or 400 square feet per gallon. Pick the one that matches the numbers you already have. If your area is written in a different unit, Area Converter changes square metres into square feet in seconds.
Enter The Area And Coats
Type the paintable area in the area field and the coats in the coats field. The area is the walls and ceiling you will paint, minus doors and windows. Two coats is the usual number for a fresh colour, and one coat is enough for a refresh of the same colour. If you want the area as a share of the whole room, Percentage Calculator turns any part into a percent of the whole.
Read And Copy The Result
The result shows live as you type, with no button to press. When the area is filled, you see the paint needed, the area per coat, the coats, and the buy figure rounded up to whole litres or gallons. The Copy result button copies all of that in one go, ready to paste into a message to your supplier or a note for the job. If you work with other unit systems often, Unit Converter handles length, area and volume in one place.
That is the whole job. One area and one coat count in, one clear buy figure out, and the answer updates the moment you change anything, so you can see at once how a third coat changes the order.
Why Work Out How Much Paint You Need First?
Paint is bought by the tin, matched by the colour, and sold in whole litres and gallons. Working the coverage out before you shop keeps the walls one colour, one trip and one price.
Keep The Colour Matched
Paint from different batches can look different, and a wall finished with a second tin can show a visible line. Buying the full amount at once means the whole room comes from one batch and one colour.
Avoid A Second Trip
A second trip costs as much in time as in money. The roller stops, the wall waits, and the job loses an evening. A worked out buy figure means one trip to the shop and the work runs without a break.
Stop Paying For Spoiled Paint
Once a tin is opened, the paint goes off, and a tin bought just in case is often useless by the next job. Buying only the paint the room needs means nothing is left to spoil on the shelf.
What Can You Do With Paint Coverage Calculator?
The result is a single paint figure with a buy figure beside it, but the uses around it are practical and everyday. These are the ones people come back for.
Paint A Bedroom
A bedroom is the most common job. Measure the walls, take off the doors and windows, and type the area. Walls of 50 square metres with 2 coats need 10 litres at 10 square metres per litre, which is two 5 litre tins. If your walls are measured in feet, Length Converter changes the wall lengths into metres without any mental maths.
Price A Whole House
Once you know the paint per room, you can price the house. Add the rooms together, multiply by the tin price, and the cost of the job is clear before the first roller is loaded. For the price gap between two paint ranges, Discount Calculator works it out from the two figures.
Compare Paint Ranges
Changing the paint range changes the coverage. A premium paint at 12 square metres per litre covers more wall per tin than a budget paint at 10, so the dearer tin can work out cheaper per wall. For the coverage gap between the two paints, Ratio Calculator compares them in one step.
Paint Coverage Calculator Quality And Settings
The tool is built to be exact and honest. It uses the coverage from the tin, it shows the buy figure rounded up beside the exact figure, and it never changes a number you typed.
- Two unit systems: Metric with square metres and litres, or Imperial with square feet and gallons. The formula changes with the units, so the answer stays the same either way.
- Live result: the paint needed and the buy figure appear as you type, with no Convert button and no Calculate button to press.
- Coverage from the tin: pick 10 or 12 square metres per litre, or 350 or 400 square feet per gallon, because the coverage on your tin is the figure that matters.
- Honest buy figure: the exact paint is shown to two decimals, and the buy figure is always rounded up to whole litres or gallons, because paint is sold in whole tins.
- Copy the result: the Copy result button copies the paint needed, the area per coat, the coats and the buy figure in one go, ready to paste anywhere.
If the area field is empty, the tool shows the plain status “Enter the paintable area.” instead of guessing a number. That way you never see a result built on a missing value.
How Paint Coverage Calculator Works
The tool runs entirely in your browser. It multiplies the paintable area by the number of coats, divides by the coverage of one litre or one gallon, and rounds the buy figure up to whole litres or gallons. The American Coatings Association publishes the same coverage practice that paint makers follow, which is why the figures from this tool match the figures on the tin.
Because the maths runs on your device, nothing is uploaded and nothing is stored. The coats field is left at 2 when it is empty, because two coats is the usual number, and a coat count outside 1 to 4 is refused, because it is almost certainly a typing slip.
Privacy
Your measurements never leave your browser. They are typed on your own device, the result is shown on your own screen, and nothing is sent to a server at any point. Close the tab and the numbers are gone.
That matters because a job quote is private. This tool has no account, no upload, and no log, so your measurements stay private by design, not by promise.
Tips
A few small habits make the number you get back more useful and easier to trust.
- Take doors and windows off first: measure each wall, then take the area of every door and window off the total, or the tool counts paint for holes. For the mean of several wall measurements, Average Calculator works it out from any list you type.
- Read the coverage on your tin: do not guess the coverage. The tin states square metres per litre or square feet per gallon, and that figure is the one this tool should use.
- Allow for rough walls: bare plaster, rough brick and textured walls drink more paint than a smooth painted wall, so buy one extra tin for a first coat on bare plaster. For the days the job will take, Working Days Calculator counts the working days between two dates.
- Count the primer separately: a primer or mist coat is a different product with its own coverage, so work it out on its own rather than adding it to the top coats. For the time the painting will take, Time Duration Calculator measures how long the work actually lasted.
- Do not guess the area: a guessed area gives a guessed buy figure, so measure once properly and use the same figures every time.
The cleanest results come from real measurements taken wall by wall, with doors and windows taken off first. Guessed areas give guessed buy figures, so measure twice and order once.
More Tools For The Same Job
Ten more tools cover the jobs around this one, from the concrete under the floor to the roof over the room.
If that does not fit, the Roof Pitch Calculator works out the pitch from the two measurements that define it: the rise, which is how far the roof climbs, and the run, which is how far it travels sideways.
- Concrete Volume Calculator: if the room needs a concrete slab first, a concrete volume calculator works out the cubic metres and the bag count from the length, width and depth.
- Cement Bag Calculator: if you mix your own plaster and want the cement bags only, a cement bag calculator works them out from the volume and the mix ratio.
- Brick Quantity Calculator: if you are building a wall as well as painting one, a brick quantity calculator counts the bricks from the wall length and height.
- Tile Quantity Calculator: if the floor gets tiles, a tile quantity calculator counts the tiles from the room size and the tile size.
- Flooring Calculator: if the room gets laminate or vinyl instead of tiles, a flooring calculator works out the area and the boxes from the room size.
- Roof Pitch Calculator: if the build goes up to the roof, a roof pitch calculator works out the pitch and the angle from the rise and the run.
- Staircase Calculator: if the build has two floors, a staircase calculator works out the steps, the riser height and the total run.
- Gravel Calculator: if you need a hardcore base under the floor, a gravel calculator works out the volume and the weight from the length, width and depth.
- Drywall Sheet Calculator: if the walls are drywall, a drywall sheet calculator counts the sheets from the wall size and the sheet size.
- Area Converter: works out areas between square metres, square feet, acres and hectares, with the result live as you type.
FAQ
Short answers to the questions people ask most about paint coverage.
How Much Paint Per Square Metre Do I Need?
One litre of ordinary emulsion covers about 10 square metres per coat, so a wall of 50 square metres needs 5 litres per coat and 10 litres for two coats. This wall paint calculator uses the coverage from your tin. Premium paints cover about 12 square metres per litre.
How Many Coats Of Paint Do I Need?
Two coats is the usual number for a fresh colour, and one coat is enough for a refresh of the same colour. Bare plaster needs a mist coat first, then two top coats.
Do I Count Paint For Doors And Windows?
No. Take the area of every door and window off the wall area first, then work out the paint for what is left. Counting the openings as wall wastes money on paint that is never used.
How Many Litres Are In A Gallon Of Paint?
One US gallon is 3.785 litres. A gallon of paint covers about 350 square feet per coat, which is about 32.5 square metres per coat.
Is My Data Saved Anywhere?
No. Your measurements are read in your browser and never sent to a server. There is no upload, no account, and no copy kept anywhere. Closing the tab removes everything.
Is Paint Coverage Calculator by TechnSols Free?
Yes, Paint Coverage Calculator by TechnSols is completely free to use. You can work out your paint coverage as often as you need, with no account, no sign up, and no payment. The tool runs entirely in your browser, so there is nothing to install and you can use it whenever you need it.
Paint is bought by the tin and matched by the colour, so the buy figure is worth working out before the shop is visited. Measure the walls, take off the openings, and buy with the figure in front of you.